Release Notes for the Cisco ASA Series REST API, Version 1.1(x)

Available Languages

Download Options

PDF (212.6 KB)
View with Adobe Reader on a variety of devices

Updated:July 29, 2015

Release Notes for the Cisco ASA Series REST API, Versions 1.1(x)

System Requirements

New Features

Open and Resolved Bugs

End-User License Agreement

Release Notes for the Cisco ASA Series REST API, Versions 1.1(x)

First Published: March 27, 2015
Last Updated: July 29, 2015

This document contains cumulative release information for Cisco ASA REST API Versions 1.1(x).

System Requirements

For information about REST API software and hardware requirements and compatibility, see Cisco ASA Compatibility.

New Features

The following sections list new features by release.

ASA REST API 1.1(2)

Released: July 14, 2015

The following table lists the new features for ASA REST API Version 1.1(2).

Table 1 New Features for ASA REST API 1.1(2)
Feature	Description
Platform Features
ASA security module on the Firepower 9300	We introduced support for the ASA security module on the Firepower 9300.

ASA REST API 1.1(1)

Released: March 23, 2015

The following table lists the new features for ASA REST API Version 1.1(1).

Table 2 New Features for ASA REST API 1.1(1)
Feature	Description
Token-based authentication (in addition to existing basic authentication)	Client can send log-in request to a specific URL; if successful, a token is returned (in response header). Client then uses this token (in a special request header) for sending additional API calls. The token is valid until explicitly invalidated, or the idle/session timeout is reached.
Limited multiple-context support	The REST API agent can now be enabled in multi-context mode; the CLI commands can be issued only in system-context mode (same commands as single-context mode). Pass-through CLI API commands can be used to configure any context, as follows. https://<asa_admin_context_ip>/api/cli?context=<context_name> If the `context` parameter is not present, it is assumed that the request is directed to the `admin` context.
Application Protocol inspection	We added support for the following inspections: DNS over UDP HTTP ICMP ICMP ERROR RTSP DCERPC IP Options
Connection limits	We added support for the connection limits feature.
Backup and restore	We added support for the backup and restore feature.
NTP	We added support for NTP configuration.
write memory	We added support for saving the running configuration (write memory).

Open and Resolved Bugs

The open and resolved bugs for this release are accessible through the Cisco Bug Search Tool. This web-based tool provides you with access to the Cisco bug tracking system, which maintains information about bugs and vulnerabilities in this product and other Cisco hardware and software products.

Note: You must have a Cisco.com account to log in and access the Cisco Bug Search Tool. If you do not have one, you can register for an account.

For more information about the Cisco Bug Search Tool, see the Bug Search Tool Help & FAQ.

Open Bugs in 1.1(2)

Bug ID	Title
CSCut43577	Service Policy objectID POST gives duplicate even though deleted
CSCut43581	ikev2globalparams-MaxSAs out of Range
CSCut43687	PUT Access Group without "isAccessRule": true is mandatory attribute
CSCut43727	PUT of Security Object Group used in nested object group fails
CSCut43743	PATCH of Security Object Group used in nested object group fails
CSCut85205	LOCAL user creation using REST-API does not support Password field.
CSCut91323	PATCH shows 500 for invalid mtu value
CSCut92910	Extended ACE:POST ACL with IPV6 fails with 500 Internal Server Error
CSCut95547	PATCH: shows 500 for valid static IP address
CSCuu00761	BVI interface unsupported attributes returned
CSCuu00799	POST BVI interface BridgeID should be case insensitive
CSCuu00806	POST BVI ID >100 fails
CSCuu00820	POST with overlapping pre-fix length fails with status 500
CSCuu00894	Doc Page Examples for BVI interface needs to be UPDATED
CSCuu00975	POST BVI Interface ID fails with 500 Internal Server Error
CSCuu08530	PUT: No validation at the object id for BVI interface.
CSCuu19798	PUT/PATCH - Edit name of group policy shows 500
CSCuu37226	500 status code is observed for put call on /api/failover/setup
CSCuu46485	500 status code is observed for put call on /api/failover/interface
CSCuu67567	PATCH was success with 204 while changing regex class name
CSCuu67677	Non-existent bridge id is assigned to interface is accepted
CSCuu67692	Error msg to be thrown on deleting bvi intf i.e assigned to ethernet int

Resolved Bugs in 1.1(2)

There were no bugs resolved in version 1.1.(2).

Open Bugs in 1.1(1)

Bug ID	Title
CSCus75677	CLI Passthrough-Multi Cxt: Unsupported CLI command passes,Status 200
CSCut43581	ikev2globalparams-MaxSAs out of Range
CSCut43743	PATCH of Security Object Group used in nested object group fails
CSCut43687	PUT Access Group without "isAccessRule": true is mandatory attribute
CSCut43727	PUT of Security Object Group used in nested object group fails
CSCut43577	Service Policy objectID POST gives duplicate even though deleted

Resolved Bugs in 1.1(1)

Bug ID	Title
CSCus02918	ASA: speed slow down after creating multiple ACL entries via REST POST
CSCus61275	ASA REST API: 'debug rest-api agent' output is not parsed correctly
CSCut02814	can't POST a mgmt VLAN with DHCP config in transparent mode

End-User License Agreement

For information on the end-user license agreement, go to http://www.cisco.com/go/warranty.

Obtain Documentation and Submit a Service Request

For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What’s New in Cisco Product Documentation at: http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html.

Subscribe to What’s New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation as an RSS feed and delivers content directly to your desktop using a reader application. The RSS feeds are a free service.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1721R)

Was this Document Helpful?

Release Notes for the Cisco ASA Series REST API, Version 1.1(x)

Available Languages

Download Options

Table of Contents

Release Notes for the Cisco ASA Series REST API, Versions 1.1(x)

System Requirements

New Features

ASA REST API 1.1(2)

ASA REST API 1.1(1)

Open and Resolved Bugs

Open Bugs in 1.1(2)

Resolved Bugs in 1.1(2)

Open Bugs in 1.1(1)

Resolved Bugs in 1.1(1)

End-User License Agreement

Related Documentation

Obtain Documentation and Submit a Service Request

Was this Document Helpful?

Contact Cisco

Related Cisco Community Discussions

This Document Applies to These Products