Overview
sd Refreshing Site Connectivity Information
Infrastructure changes, such as adding and removing border gateway switches, require a Cisco Nexus Dashboard Orchestrator fabric connectivity Refresh. This section describes how to pull up-to-date connectivity information directly from each site's controller.
Procedure
| 1. | Log in to the Cisco Nexus Dashboard Orchestrator GUI. |
|
| 2. | In the left navigation menu, select . |
|
| 3. | In the top right of the main pane, click Configure. |
|
| 4. | In the left sidebar, under Sites, select a specific site. |
|
| 5. | In the main window, click the Refresh button to pull fabric information from the controller. |
|
| 6. | (Optional) In the Confirmation dialog, check the box if you want to remove the configuration for decommissioned border gateway switches. If you choose to enable this check box, all configuration info for any currently decommissioned border gateway switches will be removed from the database. |
|
| 7. | Finally, click Yes to confirm and load the connectivity information. This discovers any new or removed border gateways and all site-related fabric connectivity will be reimported from the site's controller. |