Cisco APIC Getting Started Guide, Release 6.1(x)

PDF

Cisco APIC Getting Started Guide, Release 6.1(x)

Finding Your Switch Inventory Using the NX-OS CLI

Updated: November 28, 2025

Want to summarize with AI?

Log in

Overview

sd Finding Your Switch Inventory Using the NX-OS CLI

This section explains how to find your switch model and serial numbers using the NX-OS CLI.

Procedure

Find your switch inventory as follows:

Example:

switch# show hardware 
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html
Copyright (c) 2002-2014, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php

Software
  BIOS:      version 07.56
  kickstart: version 12.1(1h) [build 12.1(1h)]
  system:    version 12.1(1h) [build 12.1(1h)]
  PE:        version 2.1(1h)
  BIOS compile time:       06/08/2016
  kickstart image file is: /bootflash/aci-n9000-dk9.12.1.1h.bin
  kickstart compile time:  10/01/2016 20:10:40 [10/01/2016 20:10:40]
  system image file is:    /bootflash/auto-s
  system compile time:     10/01/2016 20:10:40 [10/01/2016 20:10:40]


Hardware
  cisco N9K-C93180YC-EX ("supervisor")
   Intel(R) Xeon(R) CPU  @ 1.80GHz with 16400384 kB of memory.
  Processor Board ID FDO20101H1W

  Device name: ifav41-leaf204
  bootflash:    62522368 kB

Kernel uptime is 02 day(s), 21 hour(s), 42 minute(s), 31 second(s)

Last reset at 241000 usecs after Sun Oct 02 01:27:25 2016
  Reason: reset-by-installer
  System version: 12.1(1e)
  Service: Upgrade

plugin
  Core Plugin, Ethernet Plugin
--------------------------------
Switch hardware ID information
--------------------------------

Switch is booted up
Switch type is : Nexus C93180YC-EX Chassis
Model number is N9K-C93180YC-EX
H/W version is 0.2010
Part Number is 73-15298-01
Part Revision is 1
Manufacture Date is Year 20 Week 10
Serial number is FDO20101H1W
CLEI code is 73-15298-01

--------------------------------
Chassis has one slot
--------------------------------

Module1 ok
  Module type is : 48x10/25G
  1 submodules are present
  Model number is N9K-C93180YC-EX
  H/W version is 0.2110
  Part Number is 73-17776-02
  Part Revision is 11
  Manufacture Date is Year 20 Week 10
  Serial number is FDO20101H1W
  CLEI code is 73-17776-02

GEM ok
  Module type is : 6x40/100G Switch
  1 submodules are present
  Model number is N9K-C93180YC-EX
  H/W version is 0.2110
  Part Number is 73-17776-02
  Part Revision is 11
  Manufacture Date is Year 20 Week 10
  Serial number is FDO20101H1W
  CLEI code is 73-17776-02

---------------------------------------
Chassis has  2 PowerSupply Slots
---------------------------------------

PS1 shut
  Power supply type is : 54.000000W 220v AC
  Model number is NXA-PAC-650W-PE
  H/W version is 0.0
  Part Number is 341-0729-01
  Part Revision is A0
  Manufacture Date is Year 19 Week 50
  Serial number is LIT19500ZEK
  CLEI code is 341-0729-01

PS2 ok
  Power supply type is : 54.000000W 220v AC
  Model number is NXA-PAC-650W-PE
  H/W version is 0.0
  Part Number is 341-0729-01
  Part Revision is A0
  Manufacture Date is Year 19 Week 50
  Serial number is LIT19500ZEA
  CLEI code is 341-0729-01

---------------------------------------
Chassis has  4 Fans
---------------------------------------

FT1 ok

 Fan1(sys_fan1)(fan_model:NXA-FAN-30CFM-F)                                    is inserted but info is not available

FT2 ok

 Fan2(sys_fan2)(fan_model:NXA-FAN-30CFM-F)                                    is inserted but info is not available

FT3 ok

 Fan3(sys_fan3)(fan_model:NXA-FAN-30CFM-F)                                    is inserted but info is not available

FT4 ok

 Fan4(sys_fan4)(fan_model:NXA-FAN-30CFM-F)                                    is inserted but info is not available


====================================================================================