Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
Use the set default-vrf command to set the default VRF setting for the current session. This command acts as a keystroke shortcut for show commands. For example, if the default VRF is configured, you can issue the show route command without specifying the VRF name.
When the default VRF for the session is set to none, then IPv4 routes for the system default VRF are displayed.
Note |
To override the default VRF setting, specify the VRF name in the show command.
|
Use the show default-afi-safi-vrf command to display the default VRF setting.
Examples
In the following example, the default VRF is set to “dft_vrf:”
RP/0/0/CPU0:router# set default-vrf dft_vrf
%% Default Virtual Routing/Forwarding is set to 'dft_vrf'
In the following command, the show route command is entered without specifying a VRF name. The results for the "dft_vrf" VRF are displayed because the default VRF was set to “dft_vrf.”
RP/0/0/CPU0:router# show route ipv4
% No matching vrf found
When the default VRF for the session is set to none, the system default VRF routes are displayed. In the following example, the default VRF is set to (empty) and the show route command displays the system default VRF information:
RP/0/0/CPU0:router# set default-vrf none
%% Default Virtual Routing/Forwarding is set to ''
RP/0/0/CPU0:router# show route ipv4
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - ISIS, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, su - IS-IS summary null, * - candidate default
U - per-user static route, o - ODR, L - local
Gateway of last resort is 12.29.0.1 to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 12.29.0.1, 00:31:30
L 10.10.10.10/32 is directly connected, 3d02h, Loopback1
C 12.29.0.0/16 is directly connected, 00:31:30, MgmtEth0/0/CPU0/0
L 12.29.56.21/32 is directly connected, 00:31:30, MgmtEth0/0/CPU0/0