- Preface
- ATM Commands on the Cisco IOS XR Software
- Ethernet Interface Commandson the Cisco IOS XR Software
- Ethernet OAM Commands on the Cisco IOS XR Software
- Frame Relay Commands on the Cisco IOS XR Software
- Global Interface Commandsonthe Cisco IOS XR Software
- Link Bundling Commands on the Cisco IOS XR Software
- Management Ethernet Interface Commands on the Cisco IOS XR Software
- Multilink Commands on the Cisco IOS XR Software
- Null Interface Commands
- Packet-over-SONET Interface Commands on the Cisco IOS XR Software
- PPP Commands onthe Cisco IOS XR Software
- Serial Interface Commands on the Cisco IOS XR Software
- SONET Controller Commands on the Cisco IOS XR Software
- T3, E3, T1, E1 Controller Commands on the Cisco IOS XR Software
- 802.1Q VLAN Subinterface Commandsonthe Cisco IOS XR Software
- Index
Preface
This command reference describes the Cisco IOS XR Interfaces commands. The preface for the Cisco IOS XR Interface and Hardware Component Command Reference for the Cisco XR 12000 Series Router contains the following sections:
Changes to this Document
This section lists the technical changes made to this document since it was first published.
Revision |
Date |
Change Summary |
|---|---|---|
OL-28451-02 |
May 2013 |
Republished with documentation updates for Cisco IOS XR Release 4.3.1 features. |
OL-28451-01 |
December 2012 |
Initial Release of this document. |
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What's New in Cisco Product Documentation.
To receive new and revised Cisco technical content directly to your desktop, you can subscribe to the What's New in Cisco Product Documentation RSS feed. RSS feeds are a free service.
Feedback