To configure traffic interception separately for two inter-communicating intercepted hosts, use the overlap-tap enable command in XR Config mode. To revert to the default configuration, use the no form of this command.
This command has no keywords or arguments.
For two inter-communicating hosts where both the hosts are separately intercepted, only the ingress traffic on the ASR 9000 router related to one of the hosts is intercepted.
Command ModesXR Config mode
This command was introduced.
To use overlap-tap enable command, you must have lawful intercept configured by installing and activating asr9k-li-px.pie.
The following example shows how to configure interception of both the ingress and egress traffic on the ASR 9000 router related to two inter-communicating hosts.
RP/0/RP0/CPU0:router# configure RP/0/RP0/CPU0:router(config)# overlap-tap enable