The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This table summarizes the new and changed feature information for the MPLS Configuration Guide for Cisco NCS 6000 Series Routers, and tells you where they are documented.
| Feature | Description | Introduced/Changed in Release | Where Documented |
|---|---|---|---|
|
Point-to-Multipoint Traffic-Engineering |
This feature was introduced. |
Release 5.2.1 |
Implementing MPLS Traffic Engineering chapter: Point-to-Multipoint Traffic-Engineering Overview |
|
Policy-Based Tunnel Selection |
This feature was introduced. |
Release 5.2.1 |
Implementing MPLS Traffic Engineering chapter: Policy-Based Tunnel Selection Functions |
|
MPLS OAM 3107 Support |
This feature was introduced. |
Release 5.2.1 |
Implementing MPLS OAM chapter: |
|
Interarea P2MP Path Expansion within a Domain |
This feature was introduced. |
Release 5.2.5 |
Implementing MPLS Traffic Engineering chapter: |
Feedback