--IP Control Protocol. Protocol that establishes and configures IP over PPP.
--Multiprotocol Label Switching. Switching method that forwards IP traffic using a label. This label instructs the routers
and the switches in the network where to forward the packets based on preestablished IP routing information.
--Network Address Translation. Mechanism for reducing the need for globally unique IP addresses. NAT allows an organization
with addresses that are not globally unique to connect to the Internet by translating those addresses into globally routable
address space. Also known as Network Address Translator.
--virtual private dialup network. Also known as virtual private dial network. A VPDN is a network that extends remote access
to a private network using a shared infrastructure. VPDNs use Layer 2 tunnel technologies (L2F, L2TP, and PPTP) to extend
the Layer 2 and higher parts of the network connection from a remote user across an ISP network to a private network. VPDNs
are a cost-effective method of establishing a long distance, point-to-point connection between remote dial users and a private
network. See also VPN.
--Virtual Private Network. Enables IP traffic to travel securely over a public TCP/IP network by encrypting all traffic from
one network to another. A VPN uses “tunneling” to encrypt all information at the IP level.
--A VPN routing and forwarding instance. A VRF consists of an IP routing table, a derived forwarding table, a set of interfaces
that use the forwarding table, and a set of rules and routing protocols that determine what goes into the forwarding table.
In general, a VRF includes the routing information that defines a customer VPN site that is attached to a PE router.