To configure a VCn controller, use the controller command in the config mode. To delete a VCn controller, use the no form of this command.
controller vcn R/S/I/P
no controller vcn R/S/I/P
Configures a VCn controller. The range of n is 4-16c, 4-64c.
Displays the Rack/Slot/Instance/Port of the controller.
Command ModesConfig mode
This command was introduced.
To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
This example shows how to access the interface instance of a vc4-64c controller on port10:
RP/0/RP0:hostname(config)# controller vc4-64c 0/0/0/10