Table of Contents

Release-Notes

Firmware Release 1.6.9 - Release Notes for the Cisco 500 Series WPAN Industrial Routers

The following release notes support Firmware Release 1.6.9 on the Cisco 500 Series WPAN Industrial Routers. These release notes are updated to describe new features, limitations, troubleshooting, recommended configurations, caveats, and how to obtain support and documentation.

Contents

This publication consists of the following sections:

- Related Documentation

- Caveats

- Obtaining Documentation and Submitting a Service Request

Related Documentation

The following documentation is available:

- All of the Cisco 500 Series WPAN Industrial Routers documentation can be found here:

Caveats

Caveats describe unexpected behavior in Cisco IOS releases. Caveats listed as open in a prior release are carried forward to the next release as either open or closed (resolved).

Note You must have a Cisco.com account to log in and access the Cisco Bug Search Tool. If you do not have one, you can register for an account.

.

Open Caveats

- CSCva89386

txPower is always 30 regardless of cfg bin on IR509 and IR529.

- CSCva67733

Changing the DODAGID will not trigger store pan information.

- CSCva04700

The tlv 25 IPRouteRPLMetrics rank value is not correct.

- CSCva56953

There are no statistics for interface out packets in TLV24.

Get TLV 24 and there are no statistics for interface out packets. It always display 0 on lowpan. interface.

- CSCuy0720

TLV19 interface settings for loopback and PPP can not be set to down.

- CSCva17573

No TLV on CGE can display the ieee154 phy mode info.

- CSCva19891

IR509 hangs when executing get tlv.

- CSCuy54264

If a DAGW loses its parent, it can take around 2hrs for the DAGW to change its parent to another available within acceptable range.

- CSCuz87922

Upgrading IR529 via FND fails, but upgrading IR509 works as expected.

Closed Caveats

- Fixed a hang issue caused by big packets from ethernet.

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What’s New in Cisco Product Documentation at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html.

Subscribe to What’s New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation, as an RSS feed and deliver content directly to your desktop using a reader application. The RSS feeds are a free service.

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

© 2016 Cisco Systems, Inc. All rights reserved.

Printed in the USA on recycled paper containing 10% postconsumer waste.