EU Directives 1999/5/EC - Compliance Information for the Cisco LoRaWAN Interface Modules
Declaration of Conformity with Regard to the EU Directive 1999/5/EC (R&TTE Directive)
Obtaining Documentation and Submitting a Service Request
This document contains compliance information for the Cisco LoRaWAN Interface Modules which are intended to be placed on the market within the European Union, Lichtenstein, Switzerland, Iceland, Norway, Turkey and other countries that have implemented the EU Directive 1999/5/EC.
The information in this document is applicable to the Cisco LoRaWAN Interface Modules that currently include the following model:
The equipment operating frequency range is:
National regulations may require that operations be limited to portions of the frequency ranges identified above and/or at reduced power levels.
This declaration is only valid for configurations (combinations of software, firmware and hardware) provided and/or supported by Cisco Systems for use within the EU or countries that have implemented the EU Directives. The use of software or firmware not supported/provided by Cisco Systems may result that the equipment is no longer compliant with the regulatory requirements.
Note: The full declaration of conformity for the Cisco LoRaWAN Interface Module can be found at http://www.cisco.com/web/dofc/11358760.pdf
The following standards were applied during the assessment of the product against the requirements of the Directive 1999/5/EC:
■Radio—EN 300 220-2; EN 300 440-2
For the Cisco LoRaWAN Interface Module, the following CE mark is affixed to the equipment and its packaging:
The IXM-LPWA-800-16-K9 is equipped with antenna connectors for the use of external dedicated antennas. See Table 1 for the applicable maximum conducted power settings for each antenna.
These documents provide information about the Cisco LoRaWAN Interface Module:
■ Getting Started and Product Document of Compliance for the Cisco LoRaWAN Interface Module
■ Release Notes for IoT Field Network Director, Release 3.1
■ Cisco IOS Release 15.6(3)M - Release Notes for Cisco IR800 Industrial Integrated Services Routers and Cisco 1000 Series Connected Grid Routers
■ Cisco IR800 Integrated Services Router Software Configuration Guide
■ Cisco IoT Field Network Director User Guide, Release 3.1.x
You can find customer documentation for the Cisco LoRaWAN Interface Module at:
http://www.cisco.com/c/en/us/support/routers/interface-module-lorawan/tsd-products-support-series-home.html
Note: If you still have questions regarding the compliance of these products or you cannot find the information you are looking for, please send an email request to Cisco at complianceinfo@cisco.com
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What’s New in Cisco Product Documentation.
To receive new and revised Cisco technical content directly to your desktop, you can subscribe to the What’s New in Cisco Product Documentation RSS feed. The RSS feeds are a free service.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)