- Preface
- New and Changed Information in Release 5.1.x
- Preconfiguring Physical Interfaces
- Configuring ATM Interfaces
- Advanced Configuration and Modification of the Management Ethernet Interface
- Configuring Ethernet Interfaces
- Configuring Ethernet OAM
- Configuring Link Bundling
- Configuring Traffic Mirroring
- Configuring Virtual Loopback and Null Interfaces
- Configuring Clear Channel SONET Controllers
- Configuring Clear Channel T3/E3 Controllers
- Configuring Dense Wavelength Division Multiplexing Controllers
- Configuring POS Interfaces
- Configuring SRP Interfaces
- Configuring Serial Interfaces
- Configuring PPP
- Configuring 802.1Q VLAN Interfaces
- Configuring Tunnel Interfaces
- Configuring LAN/WAN-PHY Controllers
- Configuring the Satellite Network Virtualization (nV) System
- Index
Cisco IOS XR Interface and Hardware Component Configuration Guide for the Cisco CRS Router, Release 5.1.x
- Updated:
- November 14, 2017
Chapter: New and Changed Information in Release 5.1.x
New and Changed Information in Release 5.1.x
This table summarizes the new and changed feature information for the
Cisco IOS XR Interface and Hardware Component Configuration Guide for the Cisco CRS Router, and tells you where they are documented.
For a complete list of new and changed features in Cisco IOS XR Software, Release 5.1.x, see the New and Changed Features in Cisco IOS XR Software, Release 5.1.x for Cisco CRS Router document.
Table 2 New and Changed Features
|
|
|
|
|
|---|---|---|---|
Feedback