Define a policy for mapping interfaces between FAR and HER

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

	1.	Click the Policy Name link within the Policy Name Panel to open an entry panel. In the Policy Name field, enter the name of the policy. To add an interface-mapping entry to the policy, click Add More Interfaces (button found above Select HER listing right-side of page). To delete an entry, click Delete (X) for that entry.
	2.	To configure an interface-mapping entry, click the Policy Name link, and complete the following as necessary: To select a different HER, click the currently selected HER and choose a different one from the Select a HER drop-down menu. To select the HER IP for the tunnel destination on the HER, click the selected interface and choose a different one from the Select HER IP drop-down menu. To select the FAR interface that maps to the selected HER interface, choose an interface from the Select CGR Interface drop-down menu. Click Update .
	3.	To enable the policy, check the Enabled check box.
	4.	Click Save .

Procedure