Oracle-Based Deployment Guide for Cisco IoT FND, Release 5.x.x and Later

PDF

Configure tunnel provisioning policy

Updated: March 2, 2026

Want to summarize with AI?

Log in

Overview

Learn how to configure tunnel provisioning policies in Cisco IoT FND to map FAR-to-HER interfaces and assign devices to tunnel groups using CSV or XML files.

To map FAR-to-HER interfaces in Cisco IoT FND, follow these steps to configure tunnel provisioning policies and assign devices to tunnel groups.

Procedure

1.

Choose Config > Tunnel Provisioning .

2.

In the TUNNEL GROUPS pane, select a group to configure with tunnel redundancy.
3.

Create a CSV or XML file that lists the HERs to add to the group in the format EID, device type , as follows:

eid,deviceType
asr-0, asr1000
asr-1, asr1000
asr-2, asr1000
4.

Click Assign Devices to Tunnel Group to import the file and add HERs to the group.

5.

With the tunnel provisioning group selected, click the Policies tab.

By default, Cisco IoT FND displays the default-interface-mapping-policy-tunnel-group name for the selected tunnel group within the Policy Name panel.

Note

Interface-mapping is the only policy type currently supported in Cisco IoT FND.

Cisco IoT FND displays one interface mapping entry for every HER in the group. You can add or remove interface mapping entries as needed.