Cisco Connected Grid Device Manager Installation and User Guide, Release 3.1
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- June 13, 2013
Chapter: Installation
Installation
This chapter explains how to install the Device Manager software and contains the following topics:
Required Expertise
This guide is intended for Field Technicians who have basic experience operating a computer laptop.
System Requirements
The Device Manager has the following system requirements:
- Microsoft Windows 7 Enterprise
- 2 GHz or faster processor recommended
- 1 GB RAM minimum (for potential large log file processing)
- WiFi or Ethernet interface
- 4 GB disk storage space
- Windows login enabled
- Utility-signed Certificate Authority (CA) and Client Certificate for router authentication (obtained from your IT department)
- Customer-specific IT security hardening to keep the Device Manager laptop secure
Certificate Installation
You can import certificates through the Device Manager by employing the Setup wizard or by command line. (See Import Certificates.)
When the Device Manager cannot locate a valid Certificate Common Name in the registry, the Device Manager launches the Settings page to import a certificate.
Device Manager Installation
Follow these steps to install the Device Manager:
Step 1
Double-click the CGDManager executable to start installation.
Step 3 Select the check box to accept the terms of the License Agreement, and then click Next.
Step 4 Click Finish to exit the Setup Wizard and launch the Device Manager.
When the Device Manager cannot locate a valid Certificate Common Name in the registry, the Device Manager launches the Settings page to import a certificate.
Device Manager Removal
To remove the Device Manager application, click Start > All Programs > Cisco CGD Manager > Uninstall Cisco CGD Manager, or use Add or Remove Programs from the Control Panel.
Feedback