nv edge control serial
To enable nV Edge system on the router, use the nv edge control serial command in Admin Configuration mode.
nv edge control serial serial-number rack-number
Syntax Description
serial-number |
The serial numbers of the devices in the nV Edge system. |
rack-number |
Rack number. The chassis that you enter this command becomes Rack 0 and the other chassis in the nV Edge system becomes Rack 1. |
Command Default
No default behavior or values
Command Modes
Admin Configuration mode
Command History
Release | Modification |
---|---|
Release 4.2.1 |
This command was introduced. |
Release 6.0.1 |
nV Edge System is no longer supported on ASR 9000 Series Routers. |
Usage Guidelines
Choose any one of the chassis as Rack 0 and enter the nv edge control serial serial-number rack-number command in admin configuration mode. The other chassis becomes Rack 1.
Task ID
Task ID | Operation |
---|---|
ethernet-services |
read, write |
Examples
This example shows how to enter admin configuration mode and enable nV Edge system on the router using the nv edge control serial serial-number rack-number command:
RP/0/RSP0/CPU0:router # admin
RP/0/RSP0/CPU0:router(admin)# configure
RP/0/RSP0/CPU0:router(admin-config)#nv edge control serial 123456ABCDE rack 0
RP/0/RSP0/CPU0:router(admin-config)#nv edge control serial 789012ABCDE rack 1
RP/0/RSP0/CPU0:router(admin-config)#commit