adduser
|
Adds a new CMP user ID/password.
|
aux
|
Connects to route processor CPU auxiliary port for 32-bit image.
Connects to system admin plane for 64-bit image.
|
con
|
Connects to route processor CPU console port.
Although multiple SSH sessions to the CMP shell are allowed, the con , aux, or lc command execution is allowed for only single user at a time.
|
copykey
|
SCP a key.
|
deluser
|
Deletes a user ID.
It is recommended that you delete the default username cmp after a new user is created.
|
desc_err
|
Shows description of command error codes.
|
debug
|
Enables CMP console logging functionality.
|
dns
|
Changes DNS name.
The initial service advertisement uses the domain name of chassis serial number + RSP/RP slot. This can be changed using the
dns command.
|
exit
|
Logs out of CMP.
|
fanspeed
|
Shows information about fan trays in the chassis.
|
help
|
Displays available CMP commands.
|
hostname
|
Changes a host name.
|
lc_con
|
Connects to a line card console.
|
lcslotinfo
|
Shows line card slot ID information.
|
passwd
|
Changes password (minimum 5 and maximum 8 characters).
|
priv
|
Enters privileged EXEC mode.
|
pxeboot |
PXE boots a 64-bit Cisco IOS XR image to Route processor CPU memory.
|
resetcmp
|
Clears CMP data (user IDs, passwords, DNS name, hostname and SSH key) to default settings.
|
run
|
Runs diagnostic commands ping/ping6/traceroute/traceroute6 to diagnose basic network connectivity problems.
|
scpboot
|
SCP boots 32-bit IOS XR image and TURBOBOOT to route processor CPU memory.
|
show
|
Shows all CMP data.
Displays ip/key/cmp configuration.
|
showinv
|
Shows the physical inventory.
|
showtemp
|
Shows the temperature information.
|
slotmap
|
Displays physical slot and card mapping information.
|
sshkeygen
|
Generates a new SSH key.
|
unlock
|
Removes all system locks.
From CMP shell only one user is allowed to login to the console port, auxiliary port or LC console, and that user holds the
lock and there is no access to other users.
|
warmreset
|
Warm resets local route processor.
|