Skip to content
Skip to search
Skip to footer

Segment Routing Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 7.11.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: December 8, 2023

Chapter: New and Changed Information for Segment Routing Features

New and Changed Information for Segment Routing Features
New and Changed Segment Routing Features

New and Changed Information for Segment Routing Features

This table summarizes the new and changed feature information for the Segment Routing Configuration Guide for Cisco ASR 9000 Aggregation Services Routers , and lists where they are documented.

New and Changed Segment Routing Features

Segment Routing Features Added or Modified in IOS XR Release 7.11.x


Feature	Description	Introduced/Changed in Release	Where Documented
SR Policy Liveness Monitoring on Segment Routing over IPv6 (SRv6)	This feature was introduced	Release 7.11.1	SR Policy Liveness Monitoring
Configure Segment Lists to Activate Candidate Paths in SRv6 for PM Liveness	This feature was introduced	Release 7.11.1	Configure Segment Lists to Activate Candidate Paths in SRv6 for PM Liveness
Configure Flow Labels in SRv6 Header for PM Liveness	This feature was introduced	Release 7.11.1	Configure Flow Labels in SRv6 Header for PM Liveness
Two-Way Active Measurement Protocol Light Source Address Filtering	This feature was introduced	Release 7.11.1	Two-Way Active Measurement Protocol Light Source Address Filtering
SRv6 ESI Filtering	This feature was introduced	Release 7.11.1	SRv6 ESI Filtering
SRv6-Services: L2 EVPN Services with Local SIDs from W-LIB	This feature was introduced	Release 7.11.1	SRv6-Services: L2 EVPN Services with Local SIDs from W-LIB
SRv6-Services: L3 Services with Local SIDs from W-LIB	This feature was introduced	Release 7.11.1	SRv6-Services: L3 Services with Local SIDs from W-LIB
SR-TE Application Programming Interface (API)	This feature was introduced	Release 7.11.1	SR-TE Application Programming Interface (API)
SR-TE Explicit Path with a BGP Prefix SID as First Segment	This feature was introduced	Release 7.11.1	SR-TE Explicit Path with a BGP Prefix SID as First Segment
IS-IS Flexible Algorithm with Exclude Minimum Bandwidth Constraint	This feature was introduced	Release 7.11.1	Flexible Algorithm with Exclude Minimum Bandwidth Constraint
IS-IS Flexible Algorithm with Exclude Maximum Delay Constraint	This feature was introduced	Release 7.11.1	Flexible Algorithm with Exclude Maximum Delay Constraint
Maximum Paths Per IS-IS Flexible Algorithm Per Prefix	This feature was introduced	Release 7.11.1	Maximum Paths Per IS-IS Flexible Algorithm Per Prefix
Microloop Avoidance for IS-IS with Per-Prefix Filtering	This feature was introduced	Release 7.11.1	Microloop Avoidance for IS-IS with Per-Prefix Filtering
Microloop Avoidance for OSPFv2 Single-Node Cost-in and Single-Node Cost-out Events	This feature was introduced	Release 7.11.1	Microloop Avoidance for OSPFv2 Single-Node Cost-in and Single-Node Cost-out Events

Was this Document Helpful?

Feedback

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)