Cisco IAD2430 Series Integrated Access Device Hardware Installation Guide
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- October 11, 2004
Chapter: Index
Index
Numerics
19-Inch Rack Installation—Front Panel Forward 3-7
19-Inch Rack Installation—Rear Panel Forward 3-7
A
AC power requirements 2-3, 3-21
analog voice ports 3-29
ASCII terminal, connecting 3-32
auxiliary port 3-23
B
C
cable
distance limitations2-4to ??
cable use reference table 3-31
caution messages
exceeding EIA/TIA-449 distance limitations 2-5
exceeding V.35 distance limitations 2-5
for desk and table mounting 3-14
checklist, installation 3-4
Cisco IAD2430-24FXS Chassis 1-3
Cisco IAD2431-16FXS chassis 1-4, 1-5, 1-6
Cisco IAD2431-1T1E1 chassis 1-5
Cisco IAD2431-8FXS chassis 1-4
Cisco IAD2432-24FXS chassis 1-5, 1-6
Cisco IOS software 1-10
Cisco IOS software documentation iii-xvi
clocking, external 3-28
computer, for configuration 3-5
configuration methods 1-10, 1-11
connecting ports 3-23, 3-27, 3-28, 3-30
console port
PC connection 3-22
console terminal 3-5
controls, descriptions of 1-6
cooling recommendations 2-2
crimping the ground lug onto the Ground wire 3-16
D
demarcation device 3-28
digital voice connection 3-31
digital voice-port connections 3-30
distance limitations for cables2-4to 2-6
documentation iii-xvi
E
EIA/TIA-232 2-5
EIA/TIA-530 2-5
electrical safety guidelines 3-2
electromagnetic interference
electrostatic discharge
ESD 3-3
F
Fast Ethernet cables, distance limitations 2-4
Fast Ethernet hub 3-5
Fast Ethernet port, connecting 3-23
figures
19-Inch Rack Installation—front panel forward 3-7
19-Inch Rack Installation—rear panel forward 3-7
Analog Voice Connection 3-30
Attaching the Chassis to the 19-Inch Rack—Rear Panel Forward 3-9
Attaching the Wall-Mount Brackets 3-10
Cisco IAD2430-24FXS Chassis 1-3
Cisco IAD2431-16FXS Chassis 1-4, 1-5, 1-6
Cisco IAD2431-1T1E1 Chassis 1-5
Cisco IAD2431-8FXS Chassis 1-4
Cisco IAD2432-24FXS Chassis 1-5, 1-6
Crimping the Ground Lug onto the Ground Wire 3-16
Digital Voice Connection 3-31
Grounding Lug Fastened to Terminals 3-16
Installation Checklist 3-4
Serial Port Connection 3-28
T1 Port to Network Connection 3-29
T1 WAN Interface with Analog FXS and FXO User Interfaces 1-14
T1 WAN Interface with Analog FXS User Interfaces 1-13, 1-14
T1 WAN Interface with T1 Interface to PBX 1-14
Telco 19-Inch Rack Installation—Rear Panel Forward 3-8
Wall-Mounting the Chassis 3-11
G
ground loops, EMI effects of 2-6
I
installation
checklist 3-4
rack-mounting 3-6
tools, parts, and equipment required 3-4
installation checklist 3-4
interface options 1-2
IOS
L
lightning, EMI effects 2-6
log, record keeping 3-3
M
malfunctions, how to diagnose 4-9
modem 3-5
modem connections 3-32
mounting methods 2-1
O
operating system 1-10
P
packing list 3-5
PC connections 3-32
power connection, AC 3-21
power cord, description 2-2
power supply voltages 2-2
problems, diagnosing and correcting 4-9
R
rack mounting the chassis 3-8
radio-frequency interference
record keeping 3-4
related documentation iii-xvi
remote PC, connecting 3-32
S
serial port connection 3-28
Simple Network-enabled Auto-Provision 1-10
SNAP
See Simple Network-enabled Auto-Provision
software, terminal emulation 3-22
software. Cisco IOS 1-10
speed and distance limitations 2-5
static electricity prevention 3-3
synchronous serial port connections 3-27
T
T1/E1 digital voice port 3-30
T1/E1 trunk port 3-28
T1 port to network connection 3-29
T1 WAN interface with analog FXS and FXO user interfaces 1-14
T1 WAN interface with analog FXS user interfaces 1-13
T1 WAN interface with analog FXS user interfaces (figure) 1-14
T1 WAN port distance limitations 2-4
tables
Cable Use Reference Table 3-31
Digital Voice Port Speed and Distance Limitations 2-6
EIA/TIA-232 Speed and Distance Limitations 2-4
EIA/TIA-449, V.35, and X.21 Speed and Distance Limitations 2-5
EIA/TIA-530 Speed and Distance Limitations 2-5
T1 WAN Port Distance Limitations 2-4
Troubleshooting the Cisco IAD 4-10
Telco 19-Inch rack installation—rear panel forward 3-8
telco rack 3-7
Telnet 1-10
terminal emulation software 3-22, 3-32
tools required for installation 3-4
troubleshooting the Cisco IAD 4-10
U
uninterruptible power supply 3-33, 3-34
V
V.35
distance limitations 2-5
ventilation recommendations 2-2
voltage selection, AC 2-2
W
wall-mounting the chassis 3-9, 3-11
warnings
product disposal 1-3
requirement to read installation instruction 2-3
SELV-to-TNV connection hazard 3-28
WAN port hazardous voltages 3-29
working during lightning activity 3-18
warnings, safety iii-viii
X
X.21
distance limitations 2-5
Feedback