The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This appendix provides system, port, and cabling specifications for the Cisco 836 and Cisco SOHO 96 series routers.
This chapter provides information on the following topics:
Table A-1 outlines the system specifications for the Cisco 836 and Cisco SOHO 96 series routers.
For information on regulatory compliance, refer to the Regulatory Compliance and Safety Information for Cisco 800 and SOHO Series Router document that shipped with your router.
Warning Ultimate disposal of this product should be handled according to all national laws and regulations.
This section provides pinouts for the following connectors:
•ADSL—See Table A-2.
•Console (for connecting a terminal or PC)—See Table A-3.
|
|
|
|
---|---|---|---|
1 |
Unused |
1 |
Unused |
2 |
Unused |
2 |
Unused |
3 |
Ring |
3 |
Unused |
4 |
Tip |
4 |
Ring |
5 |
Unused |
5 |
Tip |
6 |
Unused |
6 |
Unused |
7 |
Unused |
||
8 |
Unused |
|
|
|
---|---|---|
1 |
RTS |
8 |
2 |
DTR |
6 |
3 |
TXD |
2 |
4 |
GND |
5 |
5 |
GND |
5 |
6 |
RXD |
3 |
7 |
DSR |
4 |
8 |
CTS |
7 |
The console port is configured as a data communications equipment (DCE) device. The default parameters for the console port are as follows:
•9600 baud
•Eight data bits
•No parity
•One stop bit
This section provides specifications for the following Ethernet cables, which you might need to provide:
•Straight-through cables
•Crossover cables
Table A-4 lists the specifications for straight-through and crossover Ethernet cables.
|
|
---|---|
10BASE-T |
Category 3 or 5 |
100BASE-T |
Category 5 or higher |
Table A-5 provides the maximum distance of Ethernet and telephone cables that you can use to connect equipment to the router.
|
|
---|---|
Ethernet cables |
328 ft (100 m) |