Cisco Configuration Professional Express on the IR800 Series Quick Start Guide Release 3.5

Unpacking the Router

The IR800 series ships with a Getting Started Guide, Power Cable Components, Grounding Lug, and an Ethernet Cable.

The Cisco IR800 ships without antennas. All antennas are options that can be ordered separately.

Connect the PC to the Router

Connect one end of the Ethernet cable from the PC to an Ethernet port on the device. In the following illustration, the laptop connects to port GE0 on the IR809 (left), or port GE1 on the IR829 (right).

Verify the Initial Configuration and Use Cisco CP Express

Cisco CP Express is supported on these browsers:

• Mozilla Firefox 25 or later
• Google Chrome 30 or later
• Microsoft Internet Explorer 11 or later
• Safari 9.1
• Microsoft Edge Version 38

Caution This product is shipped with a default configuration which is unique to each device. The default configuration allows the user to access the CCP Express Quick Setup Wizard to perform basic configuration. Erasing or any other manual configuration changes prior to using CCP Express is strongly discouraged as the default configuration is mandatory for CCP Express to operate. For any guidance on these scenarios, users are requested to reach out to their platform support team.

To verify if Cisco CP Express is installed correctly:

1. Launch the browser.

2. In the address bar, type the IP address of the router where Cisco CP Express is installed.

http://10.10.10.1 or http://myir800.com

https://10.10.10.1 or https://myir800.com

3. Specify the username and the password of the router.

If you are using the router for the first time, use the one-time username and password (by default, cisco/cisco) configured for the router.

4. Click Log In.

The Cisco CP Express launches and is ready for use. With the one-time user present, you get redirected to the Wizard page with the prompt to create a new user.

Note This step is mandatory as it is crucial to retain access to the router. The one-time user will be automatically removed at this stage.

Enter the username/password for the new user to be created, and click Ok. You will be prompted a second time to enter the username/password of the new user just created.

The Quick Setup Wizard & Advanced Setup choice page appears:

The Quick Setup Wizard is highly recommended, as it helps to bring up the device with basic configuration. The Advanced Settings option takes you to the Landing page displayed later in this document. Click on the Quick Setup Wizard to begin a quick and easy WAN/LAN setup wizard. The Welcome screen appears:

Read through the Before you begin notes to make sure you have all of the information you need. When you are ready to begin, click Get Started. The Basic Settings screen appears:

Mandatory fields are marked with a red asterisk (*). Continue through the various screens by clicking Next to complete your basic configuration. When you are complete, the Summary screen appears:

Review your settings and if satisfied, click Submit. Once the configuration is pushed, you will be automatically redirected to the Dashboard page in the Advanced Settings section.

You can now use Cisco CP Express to configure additional features or modify existing feature configurations.

Related Documentation and Cisco Website

Refer to the following Cisco CP Express documentation:

Release Notes for Cisco Configuration Professional Express 3.5

https://www.cisco.com/c/en/us/td/docs/routers/access/800/829/software/cisco_configuration_professional_express/v3_5/guides/release-notes/ccp-express-rn-3-5.html

Cisco Configuration Professional Express 3.5 Administration Guide:

https://www.cisco.com/c/en/us/td/docs/routers/access/800/829/software/cisco_configuration_professional_express/v3_5/guides/adminguide/CCP_admin_guide.html

For more information about the IR800 routers, including installation and compliance, refer to the IR800 Installation documentation at the following URL:

https://www.cisco.com/c/en/us/support/routers/800-series-industrial-routers/products-installation-guides-list.html

You can access the Cisco website at this URL:

https://www.cisco.com

 Printed in the USA on recycled paper containing 10% postconsumer waste.

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

Copyright © 2017 Cisco Systems, Inc. All rights reserved