Site Log and Manufactures

Use the Site Log to provide a record of actions related to installing and maintaining the chassis. Keep it in an accessible place near the chassis so that those who performs tasks have access to it. Use the Installation Checklist (see Site Planning) to verify the steps in the installation and maintenance of your chassis. Site Log entries might include the following:

  • Installation progress—Make a copy of the Cisco NCS 4206 Installation Checklist, and insert it into the Site Log. Make entries as you complete each task.
  • Upgrade, removal, and maintenance procedures—Use the Site Log as a record of ongoing chassis maintenance and expansion history. Each time a task is performed on the Cisco NCS 4206, update the Site Log to reflect the following:
    • Removal or replacement of interface modules, fan tray, power supplies, or RSPs
    • Configuration changes
    • Maintenance schedules and requirements
    • Maintenance procedures performed
    • Intermittent problems
    • Comments and notes

The table below shows a sample site log. Make copies of the sample or design your own site log to meet the needs of your site and equipment.

Table 1. Site Log

Date

Description of Action Performed or Symptom Observed

Initials

Manufactures

The table below lists the manufacturers for equipment used with the Cisco NCS 4206.

Table 2. Manufactures

Manufacturer

Web Site or Phone Number

Products/Model

Burndy

http://www.burndy.com

Lugs