Index Numerics
100G 4-119
100G-CK-LC-C 1-38
100GE or OTU4 2-25
Card Constraints 4-143
Card Operation Modes 4-143
Card Placement Rules 4-130
Card Slot Constraints 4-121
Card Slots 4-119
Importing 2-77
Regeneration Configurations 4-145
Use Client Payg 4-2
100G-LC-C card
card constraints 4-143
operational modes 4-143, 4-145
placement rules 4-130
regeneration configurations 4-145
100G-ME-C card
card constraints 4-143
operational modes 4-143
placement rules 4-130
regeneration configurations 4-145
10X10G-LC card
card constraints 4-143
fiber-switched protection 1-7
operational modes 4-143, 4-145
placement rules 4-130
regeneration configurations 4-145
15216-EF-40-EVEN 2-16
placement rules 4-114
15216-EF-40-ODD 2-16, 4-12
placement rules 4-114
15216 FlexLayer Hybrid
configuration 2-3
15216-MD-48-EVEN
48 or 96 channel hybrid networks 4-115
placement rules 4-114
15216-MD-48-ODD
48 or 96 channel hybrid networks 4-115
placement rules 4-114
80-WXC
site design rules (table) 4-36
80-WXC-C card 4-11
A
A2A Finalized Circuit report
viewing 3-33
activate AR-XPE card 1-35
adding
fiber spans 2-15
notes 2-18
Remote Spur 4-164
sites 2-14
user profiles 1-45
adding sides
multi-degree site 2-4, 2-15
alien interface
defining 1-38
Gaussian cross-talk D-6
scale factors D-4
single-interfering cross-talk D-5
working area D-1
alien shelf placement rules 4-126
amplifier
OPT-EDFA-17 4-12, 4-14
OPT-EDFA-24 4-12, 4-14
Analyzer pane, description A-9
analyzing a network design 2-54
any-to-any, description 1-11
arranging sites 4-155
AR-XPE card 1-35
ASR 2-25
ASR Bundle 2-67
B
BoM
Excel report 2-63
BOM report
exporting 2-70
network 2-64
site 2-66
spare part 2-68
BoM report
totals 2-63
C
card constrains
100G-LC-C card 4-143
100G-ME-C card 4-143
card constraints
10X10G-LC card 4-143
CFP-LC card 4-143
card movement rules 4-155
card placement rules 4-128
card rules 4-136
card slot constraints 4-120
Cards supported by NCS 2015 B-9
CD Documentation 1-38
CD robustness 3-26
CFP-LC card
card constraints 4-143
operational modes 4-143, 4-145
placement rules 4-130
changing network state
install 2-57
upgrade 2-57
channel rules
traffic subnet 4-56
chassis
M12 1-1
M15 1-1
M2 1-1
M6 1-1
chassis placement rules 4-110
chassis selection rules 4-7
circuit, description 1-10
Cisco TransportPlanner
GUI description A-1
client-based 1+1 protection, description 1-5
client cards
licensing 1-38
Client Payg 1-38
client service support 1-7
closing a project 1-22
colorless demand 2-22
colorless omnidirectional 2-22
colorless property 2-21, 4-163
enable 2-31, 4-64
color scheme 1-25
Connection Viewer A-5
contentionless functionality 2-22
Controller type 1-32, 4-8
copy, description 2-56
copying price lists 2-74
copy network and go back to design mode 2-56
Copy Properties 2-32
Copy ROADM demand properties 2-32
creating
Ethernet aggregated demand 2-34
maintenance center 4-58
network copy 2-56
network design JPEG 2-62
optical subnet 2-16
point-to-point demands 2-23
price lists 2-70
P-ring demands 2-27
ROADM demands 2-29
TDM aggregated demand 2-41
traffic subnet 2-19
CRS 1-9
CTP cache
deleting 1-22
D
database file
importing 1-44
deep door 1-33, 4-5
default layout, resetting 1-45
defining a third-party interface 1-38
deleting
fiber spans 4-170
network 4-170
networks 4-170
notes 4-167
price lists 2-74
sites 4-167
traffic subnet 4-169
demand
add site 4-73
add sites 4-73
mapping 2-78
remove site 4-73
remove sites 4-73
demand, description 1-11
Design-Analyzed state, description 2-55
design state, description 2-55
Documentation
CD 1-38
Paper 1-38
door 1-33, 4-5
double ring site arrangement 4-158
E
EDFA amplifiers 4-12, 4-14
edit channel plan
traffic subnet 4-56
editing
Ethernet aggregated demand 4-65
fiber spans 4-74, 4-77
network parameters 4-1
point-to-point demand 4-58
P-ring demand 4-61
project parameters 4-1
ROADM demand 4-63
service demand 4-56
side label 4-55
sides, sides
editing 4-162, 4-163
sites 4-3
sites, sites
editing 4-162
TDM aggregated demand 4-69
EDRA 4-12
PRE, BST and RAMAN 4-13
ellipse site arrangement 4-155
Enable NCS 1-30
NCS PIDs 2-9
Encryption
Available Service Types 1-9
Card Constraints 4-145
Card Operation Modes 4-145
Card Regeneration Configurations 4-145
enabling and disabling 2-24
ROADM Platform Parameters 2-33
Supported Plugables B-8
Viewing layout of single site 3-17
Ethernet aggregated demand
creating 2-34
editing 4-65
Ethernet Aggregated Demand report 3-31
Evolved Mesh 4-6
export
network 2-77
xml to CTP 2-77
exporting
BOM 2-70
fiber spans 4-80
Export XML 2-77
F
FDCU 1-36, 4-14, 4-15, 4-18
fiber
mapping 2-78
fiber spans
adding a span 2-15
deleting 4-170
editing 4-74, 4-77
exporting 4-80
Fiber-switched protection 1-5
fiber-switched protection, description 1-5
Filler card 4-7
FLD-4 units 4-19
Flexible Site Type 4-11
FlexLayer placement rules 4-128
Flex Spectrum 4-6
G
Gaussian cross-talk D-6
Global Discount 1-38
graphical display, setting 1-24
guard band 1-35
H
Hide BoM discount 1-38
Hide BoM price 1-38
hybrid configuration 1-46
I
import
network 2-77, 2-78
xml to node 2-79
importing
database files 1-44
Osmine configuration file 1-44
Sherpa design 2-75
Importing Osmine Configuration File 1-44
Include SW License 1-38
Inline DCU
Flex SMR 2-88
Install-Analyzed state, description 2-56
Installation Parameters report 3-5
Installing CTP 1-18
Linux 1-18
Windows 1-18
Install state, description 2-56
interface operative area D-1
Internal Connections report 3-8
J
JPEG, network design 2-62
L
layout adjustments
constraints 4-153
M2 4-152
Layout Movement 4-80
performing 4-81
prerequisites 4-81
restrictions 4-80
layout report 3-15
layout rules
DCU 4-134
hybrid site 4-133
multidegree 4-134
OIC multidegree nodes 4-136
OTS units 4-134
OXC multidegree sites 4-136
Layout Templates 4-81
Components 4-81
ports 4-94
Sample XML smippets 4-88
Supported configurations 4-97
supported configurations
cards 4-105
Using 4-94
licensing
client cards 1-38
Limitations 2-82
linear topologies 5-1
linear topology 5-2
Link Availability report 3-21
loading
network 1-21
price lists 2-73
locked state 2-59
M
M2 and M6 shelf placement rules 4-125
maintenance
contracts 2-74
creating a maintenance center 4-58
Manual Regeneration 1-3
creating 2-47
map
demand 2-78
fiber 2-78
node elements 2-78
site 2-78
Maximum Rectangle View 4-159
menu bar and toolbar description A-2
meshed topology 5-3
MF-MPO-16LC 4-6
MF-MPO-16LC Cable 4-6
modifying unit ID 3-16
mouse shortcuts A-10
MPO 16-2x8 Split Cable 4-5
MPO16LC 4-6
MPO-MPO cables 1-9
MSM External Switch 4-5
multi-degree site
adding sides 2-4
multi-select 1-13
multishelf placement rules 4-122
Multi-side Editor 4-171
N
network
BOM 2-64
deleting 4-170
editing 4-1
export 2-77
import 2-77, 2-78
loading 1-21
unloading 1-21
network analysis
server E-1
Network Creation wizard 2-3
network design
analyzing 2-54
constraints 1-3
creating a copy 2-56
creating a JPEG 2-62
process flow 1-9
process overview 1-3
putting a network in the Install state 2-57
putting a network in the upgrade state 2-57
state descriptions 2-55
supported client services 1-7
supported platforms 1-4
supported protection schemes 1-4
supported topologies 1-4
unlocking 2-59
Network Mgmt Tree tab
changing the appearance 1-27
Network Wide Layout Export 3-19
Network Wide Layout Export Selection
Export layout as image 3-19
Export layout data as table 3-19
Export location 3-20
Network Wide Layout summary 3-20
Overwrite all files 3-20
NE Update file, saving 3-4
New features 1-2
NG-DWDM 2-3
Create an NG-DWDM configuration 2-3
Omni Side Type 4-163
Optical Bypass 2-24
Scalable upto Degree 4-9
Site Design Rules 4-53
Supported Topologies 2-14
Topology 2-6
node
setup from CTP 2-79
node controller 4-8
node elements
mapping 2-78
node parameters
export 2-77
limitation 2-82
import 2-77
limitation 2-82
node provisioning 2-79
node setup 2-79
notes
adding 2-18
deleting 4-167
NtVw Net# tab
changing the appearance 1-25
showing duct details 1-26
O
OCHNC circuits 2-78
omnidirectional demand 2-21
omnidirectional functionality 2-20
omnidirectional property 4-163
enable 2-31, 4-64
omnidirectional entry point 4-12, 4-162
operational modes
100G-LC-C card 4-143, 4-145
100G-ME-C card 4-143, 4-145
10X10G-LC card 4-143, 4-145
CFP-LC card 4-143, 4-145
OPT-EDFA-17 amplifier 4-12, 4-14
OPT-EDFA-24 amplifier 4-12, 4-14
optical bypass
add site 4-74
editor 4-74
remove site 4-74
optical bypass sites 4-74
optical insulators 1-30, 4-5
Optical Results report 3-23
optical subnet
creating 2-16
OSC frame type 2-12, 4-78
FE Frame 2-12, 4-78
GE Frame 2-12, 4-78
OC3 Frame 2-12, 4-78
Osmine compatible upgrading 2-62
Osmine configuration file
importing 1-44
Osmine Layout Rules 4-145, G-1
OSNR alarm
regenerating 1-35
OTU2_XP
Dual Regenerator 2-49
Dual Transponder 2-49
Mixed Mode 2-49
Protected Transponder 2-49
Single Regenerator 2-49
P
panes A-7
Paper Documentation 1-38
Pay As You Grow 1-46
bundles F-1
overview 1-46
Pay As You Grow,PAYG F-1
PAYG
licensing
client cards F-3
PAYG,PAYG
understanding 1-46
PAYG. See Pay As You Grow
PAYG license,licensing
PAYG,PAYG
licensing 1-46
penalty D-6
Per Side Installation Parameter 3-4
placement rules
100G-LC-C card 4-130
100G-ME-C card 4-130
10X10G-LC card 4-130
15216 40-Channel Mux/Demux units 4-114
15216 48-Channel Mux/Demux units 4-114
air ramp 4-110
alien shelves 4-126
AR_MXP card 4-130
AR_XP card 4-130
card slots 4-118
CFP-LC card 4-130
client shelf 4-116
controller card 4-128
DCU 4-110
external switch 4-108
M12 as node controller 4-123, 4-124
M6 as node controller 4-122, 4-123
fiber storage 4-110
FlexLayer unit 4-128
general 4-107
ITU line card 4-132
M2 4-110, 4-125
M6 4-110, 4-125
manual regeneration 4-129
multishelf 4-122
multishelf separate nodes 4-125
multishelf separate shelves 4-125
MXP card 4-132
node 4-129
one-slot card 4-118
OTS unit 4-126
OTS units 4-134
OTU2_XP card 4-129
patch panel 4-111
PSM card 4-127
rack 4-105
shelf 4-118
SMR card 4-115
two-slot card 4-118
TXP card 4-132
Y-cable 4-117
platform
setting default values 1-28
support 1-4
point-to-point demand
creating 2-23
deleting 4-169
description 1-11
editing 4-58
viewing in Project Explorer 1-14
populate shelves
from bottom 4-107
from top 4-107
power consumption 3-20
PP-MESH 3-31
price lists
copying 2-74
creating 2-70
deleting 2-74
loading or unloading 2-73
updating 2-73
viewing 2-71
viewing contracts 2-74
P-ring demand
creating 2-27
deleting 4-169
description 1-11
editing 4-61
viewing in Project Explorer 1-14
process flow 1-9
project
adding notes 2-18
closing 1-22
deleting notes 4-167
editing parameters 4-1
saving 1-22
setting default values 1-37
Project Creation wizard 2-1
Project Explorer
changing the appearance 1-25
description A-7
loaded network 1-21
unloaded network 1-21
view 1-13
project explorer
select multiple items 1-13
Properties pane, description A-8
protection support 1-4
Provision Node 2-79
R
Raman amplification 4-13, 4-15, 4-79
RAMAN-CTP 4-16
RAMAN-CTP-COP 4-16
regenerating
OSNR alarm 1-35
regeneration configurations
100G-LC-C card 4-145
100G-ME-C card 4-145
10X10G-LC card 4-145
Remote Spur 4-163
adding 4-164
duct creation 2-15
reports
BoM totals 2-63
Installation Parameters 3-5
Internal Connections 3-8
layout 3-15
Layout Table (power consumption) 3-20
Link Availability 3-21
network BOM 2-64
Optical Results 3-23
site BOM 2-66
spare part BOM 2-68
Summary 3-2
Traffic Matrix 3-11
Wavelength Routing 3-27
resetting the default layout 1-45
restricted equipment list, updating 1-33
ring topology 5-2
ROADM demand
creating 2-29
deleting 4-169
description 1-11
editing 4-63
routing strategies 1-11
viewing in Project Explorer 1-15
rules, C-band 1-29
Run Quick Analysis 1-35
S
saving
NE Update file 3-4
project 1-22
scale factors D-4
select multiple items 1-13
options 1-14
service demand
editing 4-56
setting
graphical display 1-24
platform default values 1-28
project default values 1-37
setup
node from CTP 2-79
shelf adjustments 4-154
shelf layout, adjusting 4-153
Shelf Management 1-28, 2-7, 4-4
Auto 1-28, 2-7, 4-4
Individual Shelf 1-28
Locked state 4-154
modify 4-154
Multi Shelf External Switch 1-28, 2-7, 4-4
Multi Shelf Integrated Switch 1-28, 2-7, 4-4
rules 4-122
release-upgraded network 4-124
upgraded network 4-124
Shelf Movement 4-153
Destination rack 4-153
From rack unit 4-153
Source rack 4-153
Swap 4-153
To rack unit 4-153
shelf movement rules 4-154
shelf placement rules 4-118
shelf rules 4-118
shelves placement
bottom-up approach 4-107
top-down approach 4-107
Sherpa file
importing 2-75
shortcuts A-10
side label
editing 4-55
Sides Label 1-45
single-interfering cross-talk D-5
single-span topology 5-1
site
add 4-73
add to demand 4-73
mapping 2-78
network elements 4-3
remove 4-73
remove from demand 4-73
Site Functional View 2-54
Alarms 2-55
Changing the view
Zoom In 2-55
Zoom Out 2-55
Open Site Functional View 2-55
Transponder and Muxponder connections 2-55
Zoom Out 2-55
site layout, adjusting 4-146
site properties, modify 4-160
sites
add 4-73
adding a site 2-14
add to demand 4-73
arranging 4-155
BOM 2-66
creating a maintenance center 4-58
deleting 4-167
deleting a site 4-167
editing 4-3
optical bypass
add 4-74
remove 4-74
remove 4-73
remove from demand 4-73
SMR-1 4-11
SMR-2 4-12
SMR-20 4-12
SMR-9 4-12
snake site arrangement 4-157
snapshot, network design 2-62
spare part BOM 2-68
spare parts suppliers 4-58
Split ROADM 2-83
square site arrangement 4-156
sticky 1-13
sticky selection 1-13
Sub OpMode cards 2-25
Summary report 3-2
Supported Pluggables B-1
T
tasks pane
description A-10
TCC type 1-32, 4-8
TDM aggregated demand
creating 2-41
editing 4-69
TDM Aggregated Demand report
Viewing 3-32
Terminal Services E-1
third-party interface
defining 1-38
Gaussian cross-talk D-6
scale factors D-4
single-interfering cross-talk D-5
working area D-1
topologies 5-1
linear 5-1, 5-2
meshed 5-3
ring 5-2
single-span 5-1
topology support 1-4
traffic
viewing 1-12, 1-14
traffic groups
description 1-11
point-to-point 1-14
P-ring 1-14
ROADM 1-15
Traffic Matrix report 3-11
traffic subnet
channel rules 4-56
creating 2-19
deleting 4-169
edit channel plan 4-56
U
Uninstalling CTP 1-19
Unit ID 3-5
unit ID for PP mesh 3-16
unloading
network 1-21
price lists 2-73
unlocking network components 2-59
unprotected minimum hop count, description 1-12
unprotected optimum optical path, description 1-11
unprotected subnet, description 1-12
updating
price lists 2-73
restricted equipment list 1-33
Upgrade-Analyzed state, description 2-56
upgrade network to design mode 2-56
Upgrade state, description 2-56
use AR-XPE card 1-35
user profiles, adding 1-45
Use Template 2-32, 4-63
V
viewing
maintenance contracts 2-74
price lists 2-71
traffic 1-12, 1-14
Viewing the ASR Bundle 2-67
VNC E-1
W
Wavelength Routing report 3-27
Wavelength Selection
Coloring Priority 1-35
Flat Grid Filling 1-35
Maximum Separation 1-35
Wavelength Usage 1-26
Wavelength usage information A-5
WSON PID 1-38, 4-3
X
xml
export to CTP 2-77
import to node 2-79
Y
Y-cable protection, description 1-4
Index
Numerics
100G 4-119
100G-CK-LC-C 1-38
100GE or OTU4 2-25
Card Constraints 4-143
Card Operation Modes 4-143
Card Placement Rules 4-130
Card Slot Constraints 4-121
Card Slots 4-119
Importing 2-77
Regeneration Configurations 4-145
Use Client Payg 4-2
100G-LC-C card
card constraints 4-143
operational modes 4-143, 4-145
placement rules 4-130
regeneration configurations 4-145
100G-ME-C card
card constraints 4-143
operational modes 4-143
placement rules 4-130
regeneration configurations 4-145
10X10G-LC card
card constraints 4-143
fiber-switched protection 1-7
operational modes 4-143, 4-145
placement rules 4-130
regeneration configurations 4-145
15216-EF-40-EVEN 2-16
placement rules 4-114
15216-EF-40-ODD 2-16, 4-12
placement rules 4-114
15216 FlexLayer Hybrid
configuration 2-3
15216-MD-48-EVEN
48 or 96 channel hybrid networks 4-115
placement rules 4-114
15216-MD-48-ODD
48 or 96 channel hybrid networks 4-115
placement rules 4-114
80-WXC
site design rules (table) 4-36
80-WXC-C card 4-11
A
A2A Finalized Circuit report
viewing 3-33
activate AR-XPE card 1-35
adding
fiber spans 2-15
notes 2-18
Remote Spur 4-164
sites 2-14
user profiles 1-45
adding sides
multi-degree site 2-4, 2-15
alien interface
defining 1-38
Gaussian cross-talk D-6
scale factors D-4
single-interfering cross-talk D-5
working area D-1
alien shelf placement rules 4-126
amplifier
OPT-EDFA-17 4-12, 4-14
OPT-EDFA-24 4-12, 4-14
Analyzer pane, description A-9
analyzing a network design 2-54
any-to-any, description 1-11
arranging sites 4-155
AR-XPE card 1-35
ASR 2-25
ASR Bundle 2-67
B
BoM
Excel report 2-63
BOM report
exporting 2-70
network 2-64
site 2-66
spare part 2-68
BoM report
totals 2-63
C
card constrains
100G-LC-C card 4-143
100G-ME-C card 4-143
card constraints
10X10G-LC card 4-143
CFP-LC card 4-143
card movement rules 4-155
card placement rules 4-128
card rules 4-136
card slot constraints 4-120
Cards supported by NCS 2015 B-9
CD Documentation 1-38
CD robustness 3-26
CFP-LC card
card constraints 4-143
operational modes 4-143, 4-145
placement rules 4-130
changing network state
install 2-57
upgrade 2-57
channel rules
traffic subnet 4-56
chassis
M12 1-1
M15 1-1
M2 1-1
M6 1-1
chassis placement rules 4-110
chassis selection rules 4-7
circuit, description 1-10
Cisco TransportPlanner
GUI description A-1
client-based 1+1 protection, description 1-5
client cards
licensing 1-38
Client Payg 1-38
client service support 1-7
closing a project 1-22
colorless demand 2-22
colorless omnidirectional 2-22
colorless property 2-21, 4-163
enable 2-31, 4-64
color scheme 1-25
Connection Viewer A-5
contentionless functionality 2-22
Controller type 1-32, 4-8
copy, description 2-56
copying price lists 2-74
copy network and go back to design mode 2-56
Copy Properties 2-32
Copy ROADM demand properties 2-32
creating
Ethernet aggregated demand 2-34
maintenance center 4-58
network copy 2-56
network design JPEG 2-62
optical subnet 2-16
point-to-point demands 2-23
price lists 2-70
P-ring demands 2-27
ROADM demands 2-29
TDM aggregated demand 2-41
traffic subnet 2-19
CRS 1-9
CTP cache
deleting 1-22
D
database file
importing 1-44
deep door 1-33, 4-5
default layout, resetting 1-45
defining a third-party interface 1-38
deleting
fiber spans 4-170
network 4-170
networks 4-170
notes 4-167
price lists 2-74
sites 4-167
traffic subnet 4-169
demand
add site 4-73
add sites 4-73
mapping 2-78
remove site 4-73
remove sites 4-73
demand, description 1-11
Design-Analyzed state, description 2-55
design state, description 2-55
Documentation
CD 1-38
Paper 1-38
door 1-33, 4-5
double ring site arrangement 4-158
E
EDFA amplifiers 4-12, 4-14
edit channel plan
traffic subnet 4-56
editing
Ethernet aggregated demand 4-65
fiber spans 4-74, 4-77
network parameters 4-1
point-to-point demand 4-58
P-ring demand 4-61
project parameters 4-1
ROADM demand 4-63
service demand 4-56
side label 4-55
sides, sides
editing 4-162, 4-163
sites 4-3
sites, sites
editing 4-162
TDM aggregated demand 4-69
EDRA 4-12
PRE, BST and RAMAN 4-13
ellipse site arrangement 4-155
Enable NCS 1-30
NCS PIDs 2-9
Encryption
Available Service Types 1-9
Card Constraints 4-145
Card Operation Modes 4-145
Card Regeneration Configurations 4-145
enabling and disabling 2-24
ROADM Platform Parameters 2-33
Supported Plugables B-8
Viewing layout of single site 3-17
Ethernet aggregated demand
creating 2-34
editing 4-65
Ethernet Aggregated Demand report 3-31
Evolved Mesh 4-6
export
network 2-77
xml to CTP 2-77
exporting
BOM 2-70
fiber spans 4-80
Export XML 2-77
F
FDCU 1-36, 4-14, 4-15, 4-18
fiber
mapping 2-78
fiber spans
adding a span 2-15
deleting 4-170
editing 4-74, 4-77
exporting 4-80
Fiber-switched protection 1-5
fiber-switched protection, description 1-5
Filler card 4-7
FLD-4 units 4-19
Flexible Site Type 4-11
FlexLayer placement rules 4-128
Flex Spectrum 4-6
G
Gaussian cross-talk D-6
Global Discount 1-38
graphical display, setting 1-24
guard band 1-35
H
Hide BoM discount 1-38
Hide BoM price 1-38
hybrid configuration 1-46
I
import
network 2-77, 2-78
xml to node 2-79
importing
database files 1-44
Osmine configuration file 1-44
Sherpa design 2-75
Importing Osmine Configuration File 1-44
Include SW License 1-38
Inline DCU
Flex SMR 2-88
Install-Analyzed state, description 2-56
Installation Parameters report 3-5
Installing CTP 1-18
Linux 1-18
Windows 1-18
Install state, description 2-56
interface operative area D-1
Internal Connections report 3-8
J
JPEG, network design 2-62
L
layout adjustments
constraints 4-153
M2 4-152
Layout Movement 4-80
performing 4-81
prerequisites 4-81
restrictions 4-80
layout report 3-15
layout rules
DCU 4-134
hybrid site 4-133
multidegree 4-134
OIC multidegree nodes 4-136
OTS units 4-134
OXC multidegree sites 4-136
Layout Templates 4-81
Components 4-81
ports 4-94
Sample XML smippets 4-88
Supported configurations 4-97
supported configurations
cards 4-105
Using 4-94
licensing
client cards 1-38
Limitations 2-82
linear topologies 5-1
linear topology 5-2
Link Availability report 3-21
loading
network 1-21
price lists 2-73
locked state 2-59
M
M2 and M6 shelf placement rules 4-125
maintenance
contracts 2-74
creating a maintenance center 4-58
Manual Regeneration 1-3
creating 2-47
map
demand 2-78
fiber 2-78
node elements 2-78
site 2-78
Maximum Rectangle View 4-159
menu bar and toolbar description A-2
meshed topology 5-3
MF-MPO-16LC 4-6
MF-MPO-16LC Cable 4-6
modifying unit ID 3-16
mouse shortcuts A-10
MPO 16-2x8 Split Cable 4-5
MPO16LC 4-6
MPO-MPO cables 1-9
MSM External Switch 4-5
multi-degree site
adding sides 2-4
multi-select 1-13
multishelf placement rules 4-122
Multi-side Editor 4-171
N
network
BOM 2-64
deleting 4-170
editing 4-1
export 2-77
import 2-77, 2-78
loading 1-21
unloading 1-21
network analysis
server E-1
Network Creation wizard 2-3
network design
analyzing 2-54
constraints 1-3
creating a copy 2-56
creating a JPEG 2-62
process flow 1-9
process overview 1-3
putting a network in the Install state 2-57
putting a network in the upgrade state 2-57
state descriptions 2-55
supported client services 1-7
supported platforms 1-4
supported protection schemes 1-4
supported topologies 1-4
unlocking 2-59
Network Mgmt Tree tab
changing the appearance 1-27
Network Wide Layout Export 3-19
Network Wide Layout Export Selection
Export layout as image 3-19
Export layout data as table 3-19
Export location 3-20
Network Wide Layout summary 3-20
Overwrite all files 3-20
NE Update file, saving 3-4
New features 1-2
NG-DWDM 2-3
Create an NG-DWDM configuration 2-3
Omni Side Type 4-163
Optical Bypass 2-24
Scalable upto Degree 4-9
Site Design Rules 4-53
Supported Topologies 2-14
Topology 2-6
node
setup from CTP 2-79
node controller 4-8
node elements
mapping 2-78
node parameters
export 2-77
limitation 2-82
import 2-77
limitation 2-82
node provisioning 2-79
node setup 2-79
notes
adding 2-18
deleting 4-167
NtVw Net# tab
changing the appearance 1-25
showing duct details 1-26
O
OCHNC circuits 2-78
omnidirectional demand 2-21
omnidirectional functionality 2-20
omnidirectional property 4-163
enable 2-31, 4-64
omnidirectional entry point 4-12, 4-162
operational modes
100G-LC-C card 4-143, 4-145
100G-ME-C card 4-143, 4-145
10X10G-LC card 4-143, 4-145
CFP-LC card 4-143, 4-145
OPT-EDFA-17 amplifier 4-12, 4-14
OPT-EDFA-24 amplifier 4-12, 4-14
optical bypass
add site 4-74
editor 4-74
remove site 4-74
optical bypass sites 4-74
optical insulators 1-30, 4-5
Optical Results report 3-23
optical subnet
creating 2-16
OSC frame type 2-12, 4-78
FE Frame 2-12, 4-78
GE Frame 2-12, 4-78
OC3 Frame 2-12, 4-78
Osmine compatible upgrading 2-62
Osmine configuration file
importing 1-44
Osmine Layout Rules 4-145, G-1
OSNR alarm
regenerating 1-35
OTU2_XP
Dual Regenerator 2-49
Dual Transponder 2-49
Mixed Mode 2-49
Protected Transponder 2-49
Single Regenerator 2-49
P
panes A-7
Paper Documentation 1-38
Pay As You Grow 1-46
bundles F-1
overview 1-46
Pay As You Grow,PAYG F-1
PAYG
licensing
client cards F-3
PAYG,PAYG
understanding 1-46
PAYG. See Pay As You Grow
PAYG license,licensing
PAYG,PAYG
licensing 1-46
penalty D-6
Per Side Installation Parameter 3-4
placement rules
100G-LC-C card 4-130
100G-ME-C card 4-130
10X10G-LC card 4-130
15216 40-Channel Mux/Demux units 4-114
15216 48-Channel Mux/Demux units 4-114
air ramp 4-110
alien shelves 4-126
AR_MXP card 4-130
AR_XP card 4-130
card slots 4-118
CFP-LC card 4-130
client shelf 4-116
controller card 4-128
DCU 4-110
external switch 4-108
M12 as node controller 4-123, 4-124
M6 as node controller 4-122, 4-123
fiber storage 4-110
FlexLayer unit 4-128
general 4-107
ITU line card 4-132
M2 4-110, 4-125
M6 4-110, 4-125
manual regeneration 4-129
multishelf 4-122
multishelf separate nodes 4-125
multishelf separate shelves 4-125
MXP card 4-132
node 4-129
one-slot card 4-118
OTS unit 4-126
OTS units 4-134
OTU2_XP card 4-129
patch panel 4-111
PSM card 4-127
rack 4-105
shelf 4-118
SMR card 4-115
two-slot card 4-118
TXP card 4-132
Y-cable 4-117
platform
setting default values 1-28
support 1-4
point-to-point demand
creating 2-23
deleting 4-169
description 1-11
editing 4-58
viewing in Project Explorer 1-14
populate shelves
from bottom 4-107
from top 4-107
power consumption 3-20
PP-MESH 3-31
price lists
copying 2-74
creating 2-70
deleting 2-74
loading or unloading 2-73
updating 2-73
viewing 2-71
viewing contracts 2-74
P-ring demand
creating 2-27
deleting 4-169
description 1-11
editing 4-61
viewing in Project Explorer 1-14
process flow 1-9
project
adding notes 2-18
closing 1-22
deleting notes 4-167
editing parameters 4-1
saving 1-22
setting default values 1-37
Project Creation wizard 2-1
Project Explorer
changing the appearance 1-25
description A-7
loaded network 1-21
unloaded network 1-21
view 1-13
project explorer
select multiple items 1-13
Properties pane, description A-8
protection support 1-4
Provision Node 2-79
R
Raman amplification 4-13, 4-15, 4-79
RAMAN-CTP 4-16
RAMAN-CTP-COP 4-16
regenerating
OSNR alarm 1-35
regeneration configurations
100G-LC-C card 4-145
100G-ME-C card 4-145
10X10G-LC card 4-145
Remote Spur 4-163
adding 4-164
duct creation 2-15
reports
BoM totals 2-63
Installation Parameters 3-5
Internal Connections 3-8
layout 3-15
Layout Table (power consumption) 3-20
Link Availability 3-21
network BOM 2-64
Optical Results 3-23
site BOM 2-66
spare part BOM 2-68
Summary 3-2
Traffic Matrix 3-11
Wavelength Routing 3-27
resetting the default layout 1-45
restricted equipment list, updating 1-33
ring topology 5-2
ROADM demand
creating 2-29
deleting 4-169
description 1-11
editing 4-63
routing strategies 1-11
viewing in Project Explorer 1-15
rules, C-band 1-29
Run Quick Analysis 1-35
S
saving
NE Update file 3-4
project 1-22
scale factors D-4
select multiple items 1-13
options 1-14
service demand
editing 4-56
setting
graphical display 1-24
platform default values 1-28
project default values 1-37
setup
node from CTP 2-79
shelf adjustments 4-154
shelf layout, adjusting 4-153
Shelf Management 1-28, 2-7, 4-4
Auto 1-28, 2-7, 4-4
Individual Shelf 1-28
Locked state 4-154
modify 4-154
Multi Shelf External Switch 1-28, 2-7, 4-4
Multi Shelf Integrated Switch 1-28, 2-7, 4-4
rules 4-122
release-upgraded network 4-124
upgraded network 4-124
Shelf Movement 4-153
Destination rack 4-153
From rack unit 4-153
Source rack 4-153
Swap 4-153
To rack unit 4-153
shelf movement rules 4-154
shelf placement rules 4-118
shelf rules 4-118
shelves placement
bottom-up approach 4-107
top-down approach 4-107
Sherpa file
importing 2-75
shortcuts A-10
side label
editing 4-55
Sides Label 1-45
single-interfering cross-talk D-5
single-span topology 5-1
site
add 4-73
add to demand 4-73
mapping 2-78
network elements 4-3
remove 4-73
remove from demand 4-73
Site Functional View 2-54
Alarms 2-55
Changing the view
Zoom In 2-55
Zoom Out 2-55
Open Site Functional View 2-55
Transponder and Muxponder connections 2-55
Zoom Out 2-55
site layout, adjusting 4-146
site properties, modify 4-160
sites
add 4-73
adding a site 2-14
add to demand 4-73
arranging 4-155
BOM 2-66
creating a maintenance center 4-58
deleting 4-167
deleting a site 4-167
editing 4-3
optical bypass
add 4-74
remove 4-74
remove 4-73
remove from demand 4-73
SMR-1 4-11
SMR-2 4-12
SMR-20 4-12
SMR-9 4-12
snake site arrangement 4-157
snapshot, network design 2-62
spare part BOM 2-68
spare parts suppliers 4-58
Split ROADM 2-83
square site arrangement 4-156
sticky 1-13
sticky selection 1-13
Sub OpMode cards 2-25
Summary report 3-2
Supported Pluggables B-1
T
tasks pane
description A-10
TCC type 1-32, 4-8
TDM aggregated demand
creating 2-41
editing 4-69
TDM Aggregated Demand report
Viewing 3-32
Terminal Services E-1
third-party interface
defining 1-38
Gaussian cross-talk D-6
scale factors D-4
single-interfering cross-talk D-5
working area D-1
topologies 5-1
linear 5-1, 5-2
meshed 5-3
ring 5-2
single-span 5-1
topology support 1-4
traffic
viewing 1-12, 1-14
traffic groups
description 1-11
point-to-point 1-14
P-ring 1-14
ROADM 1-15
Traffic Matrix report 3-11
traffic subnet
channel rules 4-56
creating 2-19
deleting 4-169
edit channel plan 4-56
U
Uninstalling CTP 1-19
Unit ID 3-5
unit ID for PP mesh 3-16
unloading
network 1-21
price lists 2-73
unlocking network components 2-59
unprotected minimum hop count, description 1-12
unprotected optimum optical path, description 1-11
unprotected subnet, description 1-12
updating
price lists 2-73
restricted equipment list 1-33
Upgrade-Analyzed state, description 2-56
upgrade network to design mode 2-56
Upgrade state, description 2-56
use AR-XPE card 1-35
user profiles, adding 1-45
Use Template 2-32, 4-63
V
viewing
maintenance contracts 2-74
price lists 2-71
traffic 1-12, 1-14
Viewing the ASR Bundle 2-67
VNC E-1
W
Wavelength Routing report 3-27
Wavelength Selection
Coloring Priority 1-35
Flat Grid Filling 1-35
Maximum Separation 1-35
Wavelength Usage 1-26
Wavelength usage information A-5
WSON PID 1-38, 4-3
X
xml
export to CTP 2-77
import to node 2-79
Y
Y-cable protection, description 1-4