<AID>
|
Access identifier from the “ALL” section. All of the STS, VT1, Facility, and DS1 AIDs are supported. The AR-MXP and AR-XP cards use the VFAC Access Identifier.
|
<MONTYPE>
|
Monitored type. The parameter type is ALL_MONTYPE, which is the monitoring type list.
|
|
Alarm Indication Signal Seconds
—
Path
|
|
All possible values
|
|
OTN—Background Block Errors—Path Monitor Point
|
|
OTN—Background Block Errors—Section Monitor Point
|
|
OTN—Background Block Error Ratio—Path monitor point expressed as one tenth of a percentage
|
|
OTN—Background Block Error Ratio—Section monitor point expressed as one tenth of a percentage
|
|
FEC—Bit Errors Corrected
|
|
The number of bit errors corrected by the FEC algorithm
|
|
8B10B—Code Group Violations
|
|
Controlled Slip Seconds—Path (DSXM-12 FDL/T1.403 PM count)
|
|
Coding Violations—CP-Bit Path
|
|
Coding Violations—Line
|
|
Coding Violations—Path
|
|
Coding Violations—Section
|
|
Coding Violations—Section
|
|
8B10B—Data Code Groups
|
|
Errored Second Type A-Path (DS3XM-12 DS1 PM count)
|
|
Errored Second Type B-Path (DS3XM-12 DS1 PM count)
|
|
Errored Seconds—CP
—
Bit Path
|
|
Errored Seconds—Line
|
|
Errored Second
—
Network Path (DS3XM-12 DS1 PM count)
|
|
Errored Seconds—Path
|
|
OTN—Errored Seconds—Path Monitor Point
|
|
OTN—Errored Seconds—Section Monitor Point
|
|
Errored Second—Ratio
|
|
Errored Seconds Ratio—Path monitor point expressed as one tenth of a percentage
|
|
Errored Seconds Ratio—Section monitor point expressed as one tenth of a percentage
|
|
Errored Seconds—Section
|
|
Errored Seconds—VT Path
|
|
The total number of good packets received that were directed to a multicast address
|
|
Number of transmit packets that are collisions
|
|
The total number of packets received that have a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets
|
|
Number of received frames dropped at the port level
|
|
The total number of packets received that were less than 64 octets
|
|
The total number of packets received that are longer than 1518 octets
|
|
The total number of octets of data
|
|
The total number of packets received that are longer than 1518 octets
|
|
The total number of packets (including bad packets, broadcast packets, and multicast packets) received
|
|
The total number of packets received that are less than 64 octets
|
|
Failure Count—Line
|
|
Failure Count—Path
|
|
OTN—Failure Count—Path Monitor Point
|
|
OTN—Failure Count—Section Monitor Point
|
|
Availability Ratio
|
|
High-Order Path Background Block Error
|
|
High-Order Path Background Block Error Ratio
|
|
High-Order Path Errored Block
|
|
High-Order Path Errored Second
|
|
High-Order Path Errored Seconds—A
|
|
High-Order Path Errored Seconds—B
|
|
High-Order Path Errored Second Ratio
|
|
High-Order Path Failure Count
|
|
High-Order Path Negative Pointer Justification Count
|
|
High-Order Path, Negative Pointer Justification Count
|
|
Outage Intensity
|
|
High-Order Path Pointer Justification Count Difference
|
|
High-Order Path Pointer Justification Count
|
|
High-Order Path Pointer Justification Count Seconds
|
|
High-Order Path Positive Pointer Justification Count
|
|
High-Order Path, Positive Pointer Justification Count
|
|
The number of High-Order Path Severely Errored Period Intensity events in available time
|
|
High-Order Path Severely Errored Seconds
|
|
High-Order Path Severely Errored Second Ratio
|
|
High-Order Path Unavailable Seconds
|
|
Number of broadcast packets received since the last counter reset
|
|
The number of inbound packets
|
|
Receive Error Byte
|
|
The number of inbound packets (or transmission units) that contained errors
|
|
Receive Framing Error
|
|
Receive Interpacket Junk
|
|
Number of multicast packets received since the last counter reset
|
|
Number of bytes transmitted since the last counter reset
|
|
Number of unicast packets received since the last counter reset
|
|
Number of broadcast packets transmitted
|
|
The number of outbound packets
|
|
The number of outbound packets (or transmission units) that could not be transmitted because of errors
|
|
Number of multicast packets transmitted
|
|
Received payload cyclic redundancy check (CRC) errors
|
|
Number of unicast packets transmitted
|
|
8B10B—Idle Ordered Sets
|
|
Invalid Packet Count
|
|
Average Laser Bias current in microA
|
|
Maximum Laser Bias current in microA
|
|
Minimum Laser Bias current in microA
|
|
Normalized Laser Bias Current for OC3-8
|
|
Laser Bias Current
|
|
Laser Bias Current
|
|
Loss of Signal Seconds—Line
|
|
Low-Order Path Background Block Error
|
|
Low-Order Path Background Block Error Ratio
|
|
Low-Order Path Errored Block
|
|
Low-Order Path Errored Second
|
|
Low-Order Path Errored Seconds-A
|
|
Low-Order Path Errored Seconds-B
|
|
Low-Order Path Errored Second Ratio
|
|
Low-Order Path Failure Count
|
|
Low-Order Negative Pointer Justification Count, Detected
|
|
Low Order Negative Pointer Justification Count, Generated
|
|
Low-Order Positive Pointer Justification Count, Detected
|
|
Low-Order positive Pointer Justification Count, Generated
|
|
Low-Order Path Severely Errored Period
|
|
Low-Order Path Severely Errored Period Intensity
|
|
Low-Order Path Severely Errored
|
|
Low-Order Path Unavailable Seconds
|
|
Protection switch count
|
|
Protection switch duration
|
|
8B10B—Non Idle Ordered Sets
|
|
PPJC-PDET:Negative Pointer Justification
|
|
PPJC-PGEN:Negative Pointer Justification
|
|
Average Receive Power in one tenth of a microW
|
|
Maximum Receive Power in one tenth of a microW
|
|
Minimum Receive Power in one tenth of a microW
|
|
Normalized Optical Receive Power for OC3-8
|
|
Maximum value for OPRN
|
|
Minimum value for OPRN
|
|
Average Transmit Power in one tenth of a microW
|
|
Maximum Transmit Power in one tenth of a microW
|
|
Minimum Transmit Power in one tenth of a microW
|
|
Normalized value for Optical Power Transmitted for the OC3-8 card
|
|
Maximum value for OPTN
|
|
Minimum value for OPTN
|
|
Optical Power—Average Interval Value in one tenth of a dBm
|
|
Optical Power—Maximum Interval Value in one tenth of a dBm
|
|
Optical Power—Minimum Interval Value in one tenth of a dBm
|
|
PPJC-PDET:Positive Pointer Justification
|
|
PPJC-PGEN:Positive Pointer Justification
|
|
Protection Switching Count
|
|
Protection Switching Count—Ring
|
|
Protection Switching Count—Span
|
|
Protection Switching Count—Working
|
|
Protection Switching Duration
|
|
Protection Switching Duration—Ring
|
|
Protection Switching Duration—Span
|
|
Protection Switching Duration—Working
|
|
Severely Errored Framing/AIS Second—CP-Bit Path
|
|
Severely Errored Framing/AIS Seconds Path
|
|
Severely Errored Framing Seconds
|
|
Severely Errored Framing Seconds—Path (DS3XM-12 DS1 PM count)
|
|
Severely Errored Second—CP-Bit Path
|
|
Severely Errored Second—Line
|
|
Severely Errored Second
—
Network Path (DS3XM-12 DS1 PM count)
|
|
Severely Errored Second—Path
|
|
OTN—Severely Errored Second—Path
|
|
OTN—Severely Errored Second Ratio—Path Monitor Point expressed as one tenth of a percentage
|
|
OTN—Severely Errored Second Ratio—Section Monitor Point expressed as one tenth of a percentage
|
|
Severely Errored Second—Section
|
|
OTN—Severely Errored Second—Section Monitor Point
|
|
Severely Errored Second—VT Path
|
|
Unavailable Second—CP-Bit Path
|
|
Unavailable Second—Line
|
|
Unavailable Second
—
Network Path (DS3XM-12 DS1 PM count)
|
|
Unavailable Second—Path
|
|
OTN—Unavailable Second—Path Monitor Point
|
|
OTN—Unavailable Second—Section Monitor Point
|
|
Unavailable Second—VT Path
|
|
FEC—Uncorrectable Words
|
|
Valid Packet Count
|
<THELV>
|
Threshold level. THLEV is a float.
|
<LOCN>
|
Location associated with a particular command. The parameter type is LOCATION, which is the location where the action is to take place.
|
|
Action occurs on the far end of the facility
|
|
Action occurs on the near end of the facility
|
<TMPER>
|
(Optional) Accumulation time period for performance counters. The parameter type is TMPER, which is the accumulation time period for the performance management center.
|
|
Performance parameter accumulation interval length; every 24-hours. For SONET PM data, only one day of history data is available. For RMON managed PM data, seven days of history data are available.
|
|
Performance parameter accumulation interval length; every 1 hour. This is only applicable to RMON managed PM data. There are 24 hours of history data available.
|
|
Performance parameter accumulation interval length; every 1 minute. This is only applicable to RMON managed PM data. There are 60 minutes of history available.
|
|
Performance parameter accumulation interval length; every 15 minutes. There are 32 15-MIN buckets of history data available for this accumulation interval length.
|
|
Performance parameter accumulation interval length; starting from the last time the counters were cleared. This is only applicable to RMON managed PMs.
|