This chapter provides remove (RMV) commands for the Cisco ONS 15454 SDH.
The Remove 10GFC, 10GIGE, 1GFC, 1GFICON, 2GFC, 2GFICON, CLNT, D1VIDEO, DS3I, DV6000, E1, E3, E4, ESCON, ETRCLO, FSTE, G1000, GFPOS, GIGE, HDTV, ISC1, STM4, STM64, STM1, STM16, OCH, OMS, OTS, POS, STM1E, VC3, VC44C, VC38C, VC464C, VC48C, STS36C, VC4, VC416C, VC42C, VC43C, or VC12 (RMV-<MOD2>) command removes a facility from service. See Table 27-1 for supported modifiers by platform.
The Remove Equipment (RMV-EQPT) command removes equipment from the In Service state and places it into the Maintenance state.
This command is applicable only to equipment that is in transition from the In-Service state to the Maintenance state.