CLR Commands
This chapter provides CLR (clear) commands for the Cisco ONS 15454 SDH.
6.1 CLR-COND-SECU
Clear Security Condition
Usage Guidelines
This command clears the specified standing condition.
Note
In Software Release 6.0 and later, only the INTRUSION-PSWD parameter value is supported.
Category
Security
Security
Superuser
Input Format
CLR-COND-SECU:[<TID>]::<CTAG>[::<SECUALMTYPE>];
Input Example
CLR-COND-SECU:CISCO::123::INTRUSION-PSWD:
Input Parameters
Table 6-1 CLR-COND-SECU Input Parameters
|
|
SECUALMTYPE |
Secure alarm type. Defaults to INTRUSION-PSWD Parameter type is SECUALMTYPE—security alarm type |
• INTRUSION-PSWD |
Condition raised after an invalid password is used during login. Condition is raised only if the password is used a specified number of times. |