- Preface
- Cisco ONS Documentation Roadmap for Release 10.x.x
- New and Changed Information for Release 10.x.x
- Chapter 1, Overview
- Chapter 2, Provisioning Procedures
- Chapter 3, ACT Commands
- Chapter 4, ALW Commands
- Chapter 5, APPLY Commands
- Chapter 6, CANC Commands and Messages
- Chapter 7, CHG Commands
- Chapter 8, CLR Commands
- Chapter 9, CONN Commands
- Chapter 10, COPY Commands
- Chapter 11, DISC Commands
- Chapter 12, DLT Commands
- Chapter 13, ED Commands
- Chapter 14, ENT Commands
- Chapter 15, EX Commands
- Chapter 16, INH Commands
- Chapter 17, INIT Commands
- Chapter 18, OPR Commands
- Chapter 19, REPT Commands
- Chapter 20, RLS Commands
- Chapter 21, RMV Commands
- Chapter 22, RST Commands
- Chapter 23, RTRV Commands
- Chapter 24, SCHED Commands
- Chapter 25, SET Commands
- Chapter 26, SW Commands
- Chapter 27, TST Commands
- Chapter 28, Access Identifiers
- Chapter 29, Conditions
- Chapter 30, Modifiers
- Chapter 31, TL1 Errors
Modifiers
This chapter describes the modifiers for TL1 commands and autonomous messages for the Cisco ONS 15454, Cisco ONS 15454 M2, and Cisco ONS 15454 M6. Table 30-1 details the TL1 modifiers for commands that have carets (< >) in part of their input format; for example, RTRV-<OCN_TYPE>. A “Yes” in the platform column indicates that a particular modifier is supported in that platform. A “No” in the platform column indicates that a particular modifier is not supported in that platform.
Note
The Modifier supported on the Cisco ONS 15454 is also supported on Cisco ONS 15454 M2 and Cisco ONS 15454 M6 Platforms.
|
|
|
|
|
|---|---|---|---|
Feedback