The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter contains the following sections:
Adding user-friendly node names will help you to identify nodes in the topology diagram.
Step 1 | On the Cisco XNC menu bar, click Devices. | ||||||||||||
Step 2 | On the Nodes Learned tab, click the icon in the top right corner. | ||||||||||||
Step 3 |
The Nodes Learned dialog box displays the following fields:
|
||||||||||||
Step 4 | Close the dialog box. |
Step 1 | On the Cisco XNC menu bar, click Devices. |
Step 2 | On the Nodes Learned tab, click the Ports link for a node. |
Step 3 | The Ports List dialog box displays all of the ports for the specified node. |
Step 4 | Close the dialog box. |
Step 1 | On the Cisco XNC menu bar, click Devices. | ||||||||
Step 2 | On the Static Route Configuration tab, click Add Static Route. | ||||||||
Step 3 |
In the Add Static Route dialog box, complete the following fields:
|
||||||||
Step 4 | Click Save. |
Step 1 | On the Cisco XNC menu bar, click Devices. | ||||||||
Step 2 | On the Subnet Gateway Configuration tab, click Add Gateway IP Address. | ||||||||
Step 3 |
In the Add Gateway IP Address dialog box, complete the following fields:
|
||||||||
Step 4 | Click Save. |
Step 1 | On the Cisco XNC menu bar, click Devices. | ||||||||
Step 2 | On the Subnet Gateway Configuration tab, click Add Ports. | ||||||||
Step 3 |
In the Add Ports dialog box, complete the following fields:
|
||||||||
Step 4 | Click Save. |
Step 1 | On the Cisco XNC menu bar, click Devices. | ||||||
Step 2 | In the work area, click the Span Port Configuration tab and click Add SPAN Port. | ||||||
Step 3 |
In the Add SPAN Port dialog box, complete the following fields:
|
||||||
Step 4 | Click Save. |