Cisco WAE Design 7.2.1 GUI Installation Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Cisco WAE Design 7.2.1 GUI Installation Guide

Chapter Title

License Installation

Results

Updated:
December 18, 2019

Chapter: License Installation

License Installation

This section contains the following topics:

WAE Design Dedicated and Floating Licenses

A license is required for all features except for sample plan files used in the WAE Design application. If you have questions about obtaining a license, contact your Cisco support representative or system administrator.

Dedicated Licenses

Checked Out Floating Licenses

Borrowed Floating

  • Each license is unique to a specific device.

  • Always available (until expiration).

  • No network connectivity is required.

  • Must be downloaded to an accessible device.

The FlexNet Publisher license server must be set up (usually by a system administrator). For information on setting up this license server, see the "WAE Design Floating License Server" chapter.

  • A single license is shared among users who have permission from the license server.

  • You must have connectivity to the license server.

  • There are a maximum number of licenses, and you cannot check out one if they are all in use.

  • You must either download the floating license to an accessible device, or know the hostname and MAC address of the license server. To connect to a different port, you need to know the license server's port number.

  • Regardless of the method used, you must install the license one time. Thereafter, it is automatically checked out from the server when starting the GUI or any CLI tool. When the GUI is closed or the tool stops, the license is checked in to the license server for use by others.

  • Users borrow licenses that are stored on the license server for a user-specified number of days. Other users cannot use the borrowed license.

  • You must install the license one time. Thereafter, it is available for borrowing.

  • After borrowing the license file once, it is available until you return it or until the number of days for which it is borrowed expires. If you do not return it, the license expires.

  • Connectivity to the license server is required to borrow a license, but is not required when using a borrowed license. You must also have connectivity if returning a borrowed license prior to its expiration date.

  • You cannot borrow a license if a dedicated license is already installed.

Cisco Smart Licensing

Cisco offers Smart Licensing, which enables you to monitor Cisco WAE software licenses and endpoint license consumption easily and efficiently through a simple registration and license consumption reporting process instead of having to install node-locked license files. Details of all Cisco products and licenses that you have purchased are maintained in a centralized database called the Cisco Smart Software Manager (CSSM). For more information, refer to the Cisco Smart Licensing Overview on Cisco.com. To enable Smart Licensing in WAE Design, you must install the WAE server with the Smart Licensing feature enabled. Follow the steps outlined in the “Cisco Smart Licensing” section in the Cisco WAE Server Installation Guide.

Install a License from WAE Design

To use the WAE Design GUI, you need either a dedicated license or a floating license. Regardless of the license type or method of installation, you need only install it one time. If it is a floating license, thereafter when you start WAE Design, the floating license is available to check out or borrow.

To verify a license and its features, choose File > License > Check.

Install a License

Before you begin:

  • Confirm that you have the license on an accessible device.

  • For floating licenses, the FlexNet Publisher license server must be set up (usually by a system administrator).

Procedure

Step 1

From the WAE Design, choose File > License > Install.

Step 2

Do one of the following:

  1. If you are installting a dedicated license, choose From license file. Click Browse to navigate to the location or enter the name of the license file (.lic extension).

  2. If you are installing a floating license from the license server (that is, you do not have the license file), choose Specify license server. Enter both the hostname and the MAC address of the license server. The MAC address must be a 12-digit hexadecimal number without any colon (:) separators.

    If the port is not specified, ports 27000-27009 are scanned to find the license server port and connect to it. Optionally, you can enter the license server’s TCP port number using a range of 1024 to 65535. The default license server port is 27000.

  3. If you are installing a smart license, choose Use smart license.. Enter the host on which WAE server is installed, port on which the WAE server listens for netconf messages, and WAE server login credentials (Username and Password).

Step 3

Click OK to confirm the license installation.

Borrow and Return a Floating License

If you have installed a floating license, you can borrow a license from the server for up to 30 days. The license is automatically returned to the license server at 11:59 p.m. on the last day (based on the local time on the floating license server).

You must have connectivity to the floating license server to borrow a license or to return it prior to the specified date. Connectivity is not required, however, during the period of time for which you are borrowing the license.

The number of remaining available days for the license is listed under File > License > Borrow. To determine the exact date on which the license will expire, choose File > License > Check.

Borrow a Floating License

Return a Floating License

Borrow a Floating License

To borrow a floating license:

Procedure

Step 1

In WAE Design, choose File > License > Borrow.

Step 2

Enter the number of days you want to borrow the license (integer from 1 to 30), and click OK.

Return a Floating License

To return a floating license:

Procedure

Step 1

In WAE Design, choose File > License > Return.

Step 2

Enter the number of days you want to borrow the license (integer from 1 to 30), and click OK.

Install a License from the CLI

You can use the CLI to install licenses for all products. For each license you are installing, run the license_install tool. When prompted, enter the number associated with the directory in which you want to install the license.

By default, when using license_install -file, the tool merges the features granted by the new license with those in an existing license.

Install a Dedicated License

Install a Floating License

Verify a License

Install a Dedicated License

If you are installing a dedicated license, pass the name of the license file (.lic extension). By default, the tool merges the features granted by the new license with those in an existing license.
license_install -file <path>/<filename>.lic

When prompted, enter the number associated with the directory in which you want to install the license.

By default, when using license_install -file, the tool merges the features granted by the new license with those in an existing license.

Install a Floating License

If you are installing a floating license from the license server (that is, you do not have the license file), use both the -server-host and -server-mac options. The MAC address must be a 12-digit hexadecimal number without any colon (:) separators. 

license_install -server-host <license_server_hostname> -server-mac <license_server_MAC_address>

If the -server-port option is not specified, ports 27000-27009 are scanned to find the license server port and connect to it. Optionally, you can enter the license server’s TCP port number using a range of 1024 to 65535. The default license server port is 27000. Example: 

license_install -server-host lic.cisco.com -server-mac 1a2b3c4d5e6f -server-port 27000
To borrow a license, use the license_borrow command and specify the number of days (integer from 1 to 30). Example:
license_borrow -num-days 23

To return a license, use the license_return command. There are no required or optional options.

Verify a License

Run the license_check tool. To see descriptions of the license features, use the -detail option (which defaults to true). Example: 

license_check -detail

To determine the number of days before the license expires and the exact date on which the license expires, use the license_check command.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco