Install Cisco WAE Coordinated Maintenance
Cisco WAE CM can be installed as standalone, in the same server where the Cisco WAE server software is installed, or with Cisco WAE Live. Do not install WAE CM as a root user.
Procedure
Step 1 |
Navigate to and download the Cisco WAE Coordinated Maintenance zip file from the Cisco Download Software site. |
||
Step 2 |
Log in to the server, copy the Cisco WAE Coordinated Maintenance zip file (<CoordMaint.zip> to a local directory, and unzip the file. Example:
|
||
Step 3 |
Navigate to the CoordMaint directory and install Cisco WAE Coordinated Maintenance.
|
||
Step 4 |
When prompted, enter the directory for CM_HOME (location to install the database, the plan file, and the CM configuration file). |
||
Step 5 |
Follow the installation prompts. |
||
Step 6 |
If installed as standalone or on the same server as the Cisco WAE server software, from the
If installed on the same server as Cisco WAE Live, then restart the web server.
|
||
Step 7 |
To start Cisco WAE Coordinated Maintenance, open one of the supported browsers, and enter http://server-ip:port_number/coordmaint/, where server-ip is the IP address of the server on which you have Cisco WAE Coordinated Maintenance installed and port_number is one of the following:
|
||
Step 8 |
Click the Maintenance link. |
||
Step 9 |
Set the topology template (prompted only during initial setup). Navigate to Cisco WAE 7.1 server and network information in the Topology Template fields. tab. Enter theFor information about using Cisco WAE Coordinated Maintenance, see the Cisco WAE Coordinated Maintenance User and Administration Guide. |