Cisco WAE Design 7.0.1 GUI Installation Guide
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- May 3, 2017
Chapter: WAE Design GUI Installation
WAE Design GUI Installation
This chapter provides instructions for installing the WAE Design GUI. You additionally need to install the WAE Design license and if applicable, install the floating license server.
- License Installation —Information on how to install dedicated and floating licenses.
- WAE Design Floating License Server —Procedure for installing and setting up the FlexNet Publisher license server. This is needed only if administering floating licenses.
The installation process does not install any drivers or require any changes to the operating system. You can download and install the files to any folder or directory.
Prerequisites
- It is important to review to the “Known Limitations” section in the Cisco WAE Release Notes. This section lists any WAE Design limitations you should be aware of before installation.
- A license is required for all features except for the example plan files. If you have questions about obtaining a license, contact your support representative or system administrator.
- Meet the necessary system requirements and package dependencies. For a list of these, see the “Installation Requirements” chapter in the Cisco WAE 7.0.1 Installation Guide.
Linux, Windows, and Mac Installation
Step 1
Download the Cisco WAE Planning software package from the Cisco download site.
Step 2 Extract the files in a location of your choice.
Step 3 Install and verify the license. See License Installation .
Linux Installation Details
An installer is an executable that runs a script to install the software in the proper locations. Although multiple packages are installed, they are used only if you have a license for them.
The installer performs the following tasks:
– Whether the device has the appropriate system requirements, including proper operating system, disk space, total memory, and required software packages.
If the installer sees that you do not have the appropriate system requirements, it either exits, gives a warning, or prompts you whether to continue. Since the installer might be checking for more than what your specific requirements are, you can press “y” to attempt to continue.
– Whether there are existing package installations; if there are, they are preserved.
- Provided you use the defaults, installs WAE Design software under
/opt/cariden/software/mate. If you did not use the default directory, the path is <installation_directory>software/mate. It also creates the/opt/cariden/software/mate/currentsymbolic link to the most recently installed package. Throughout the documentation, this is referenced as$CARIDEN_HOME. - Upon logging out and back in, the WAE username and associated permissions are set, and the environment variables are set.
– For executables, the WAE user has read, write, and execute permissions. Users listed in /etc/group have read and execute permissions. All others have read-only permissions.
– For non-executables, only the WAE user has read and write permissions. All other users have read-only permissions.
Step 1 Log in to the server as a user with sudo privileges.
Step 2 Go to the directory where you downloaded the software, extract the.zip file, and execute the installer as root using a bash command. The software package is the installer that automates the installation process.
The process verifies the integrity of the installation using checksums. If a checksum fails, error messages appear and the installation process ends.
Step 3 When prompted, enter the following information.
Step 4 Install and verify the license. See License Installation .
Starting WAE Design
To start WAE Design from the directory in which the WAE Design software is installed, do one of the following:
- On Windows or Linux, double-click the wae_design executable.
- On a Mac, navigate to the directory where you unpacked the distribution and double-click the WAE_Design application. Alternately, from the Terminal, enter:
(Optional) On Windows, you can associate the plan file using the.pln format with the wae_design executable. Double-clicking a.pln file opens the plan in a new instance of the GUI.
Feedback