Cisco WAE Live 6.2 Configuration Guide
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- October 1, 2015
Chapter: Multi-Network Management
Multi-Network Management
WAE Live supports multiple networks. If there is only one network, the Network list (top left) shows “default” as the name of the default network. If there are multiple networks, the name of the network that is in use shows.
To configure collections for a specific network, first create it and configure the Map archive and data collection source while that network is selected. For information, see the General Settings chapter.
Once you create a network, all users have access to its data through the Explore, Analytics, and Map components.
Active vs. Offline Networks
Each network is manually set to either an Active or Offline state.
- Active—Data can be collected for this network, and the network is visible to all users.
- Offline—Data cannot be collected for this network, and the network is not visible to users.
If you configure collection for an active network, set it to offline, and then later change it back to active, collection restarts automatically.
Add Network
If you have not run collections for a network and configured WAE Live to display the network’s information (on the General Settings page), any newly added networks have no data.
Step 1
Click the Network icon located in the top left. Initially, this says “default.”
Step 2 Select Network Manager.
Step 4 Enter a unique network to identify the network from which you are collecting.
- If collecting from an external archive, this name does not have to be identical to the archive, but best practice is to use a name that identifies the network.
- If collecting from the use of
ml_insert_plan, the network name must be the same as the one used in theml_insert_plan -networkoption.
Step 5 Optional: Enter a description of the network or other useful notes about the network.
Step 6 Set the status, and then click Save.
View or Edit Networks
Step 1 From the Settings page, select Network Manager from the list of available networks. A list of active and non-active networks appears.
Step 2 Click the network name that you want to edit.
Step 3 Enter your changes, and click Update.
Delete Networks
If you delete a network and add it back at a later time, you must reconfigure its collection.
Step 1 From the Settings page, select Network Manager from the list of available networks. A list of active and non-active networks appears.
Step 2 Click the network name that you want to delete.
Step 3 Click Delete, and then click OK to confirm the deletion.
Related Topics
- General Settings
- WAE Platform Configuration Guide
Feedback