Administering Cisco VTS

This chapter has the following topics:

Setting up System

To set up the system:

    Step 1   Go to Administration > System Settings. The System Settings page appears.
    Step 2   Enter the Domain ID.
    Step 3   Enter the DHCP Server IP.
    Step 4   Enter the AnyCast GW Mac.
    Step 5   Click Submit.

    Setting Global Route Reflector

    This option enables the system to use the devices in the global router reflector. The devices will not be configured at this time. The BGP configuration are performed at the time of Admin domain/ Functional group time.

    To set the global route reflector:

      Step 1   Go to Administration > Route Reflector. The Route Reflector page appears which shows a list of devices that allows you to choose between Global and Inline settings.
      Step 2   Set the Global toggle switch to Yes to view the list of all devices that is RR capable.
      Note   

      If you set the Global toggle switch to No, it means that the route reflector setting is Inline and you do not have the option to select the device because the Route Reflector page displays an empty list.

      Step 3   From the Device Name drop-down list, select or drag the device(s) that you want to assign or set as global route reflector.

      You can also view the Device Status and the IP Address.

      Step 4   Click Save.