Administering Cisco VTS
This chapter has the
|| Go to
System Settings page appears.
Setting Global Route
This option enables
the system to use the devices in the global router reflector. The devices will
not be configured at this time. The BGP configuration are performed at the time
of Admin domain/ Functional group time.
To set the global route reflector:
|| Go to
Reflector page appears which shows a list of devices that allows you to choose
between Global and Inline settings.
|| Set the Global
toggle switch to
Yes to view the list of all devices that is RR
If you set
the Global toggle switch to
No, it means that the route reflector setting is
Inline and you do not have the option to select the device because the Route
Reflector page displays an empty list.
Name drop-down list, select or drag the device(s) that you want to
assign or set as global route reflector.
You can also
view the Device Status and the IP Address.