Prime Network Services Controller supports three methods to authenticate user logins:

• Local to Prime Network Services Controller

• Remote through LDAP

• Remote through TACACS+

The role and locale assignments for a local user can be changed on Prime Network Services Controllername-network-controller. The role and locale for a remote user can be changed on LDAP. If any of the following information assigned to a user is modified, the administrator must delete all existing sessions of that user so that the new privileges take effect:

• Role

• Privilege for a role

• Locale

• Organization in a locale

Note	For the Cisco PNSC, Release 3.4.2c, only the admin and read-only roles are supported.

If a system is configured for a supported remote authentication service, you must create a provider for that service to ensure that Prime Network Services Controller and the system configured with the service can communicate.

User Accounts in Remote Authentication Services

You can create user accounts in Prime Network Services Controller or in the remote authentication server.

The temporary sessions for users who log in through remote authentication services can be viewed through the Prime Network Services Controller GUI.

User Roles and Locales in Remote Authentication Services

If you create user accounts in the remote authentication server, you must ensure that the accounts include the roles and locales those users require for working in Prime Network Services Controller and that the names of those roles and locales match the names used in Prime Network Services Controller. If an account does not have the required roles and locales, the user is granted only read-only privileges.

LDAP Attribute for User

In Prime Network Services Controller, the LDAP attribute that holds the LDAP user roles and locales is preset. This attribute is always a name-value pair. For example, by default CiscoAvPair specifies the role and locale information for the user, and if the filter is specified, the LDAP search is restricted to those values that match the defined filter. By default, the filter is sAMAccountName=$userid. The user can change these values to match the setting on the LDAP server. When a user logs in, Prime Network Services Controller checks for the value of the attribute when it queries the remote authentication service and validates the user. The value should be identical to the username.

An example of LDAP property settings is as follows:

• Timeout—30

• Retries—1

• Attribute—CiscoAvPair

• Filter—sAMAccountName=$userid

• Base DN—DC=cisco, DC=com (The specific location in the LDAP hierarchy where Prime Network Services Controller starts the query for the LDAP user.)

TACACS+ Attribute for User

In TACACS+ Server, while defining a user, to specify Authorization Level following Attribute-Value pair can be defined for the group the user belongs to:

Role—Attribute with name "role" and value should have one of the roles defined in PNSC

Note	For 3.4.2c release we support "admin" and "read-only" roles.

For example:

• In ACS server Custom Attributes can be defined in Shell Profiles and it should be linked to the Group for the user under the Authorization rules for Default Device Admin.

• In a Linux based server it would require an attribute value pair to be defined in the Group assigned to the user in the config file.

  group = GRP1 {
  service = PNSC {
  role = "admin"
  }
  }

Note	TACACS+ support is available from PNSC 3.4.2c onwards.

1.    Choose Administration > Access Control > LDAP.

2.    In the content pane, click Create LDAP Provider.

3.    In the Create LDAP Provider dialog box, provide the following information: then click OK and Save.

Select LDAP as the primary authentication service. For more information, see Selecting a Primary Authentication Service.

1.    Choose Administration > Access Control > LDAP > ldap-adapter, then click Edit.

2.    In the Edit dialog box, modify the settings as as described in the following table, then click OK and Save.

1.    Choose Administration > Access Control > LDAP >ldap-provider, then click Delete.

2.    Confirm the deletion, then click Save.

Select TACACS+ as the primary authentication service. For more information, see Selecting a Primary Authentication Service.

1.    Choose Administration > Access Control > TACACS+ > tacacsPlusProvider, then click Edit.

2.    In the Edit dialog box, modify the settings as as described in the following table, then click OK and Save.

1.    Choose Administration > Access Control > TACACS+ >tacacsPlusProvider, then click Delete.

2.    Confirm the deletion, then click Save.