View Scheduled Configuration Changes
The Scheduled Configuration Tasks page allows you to navigate to any templates, configuration tasks, or software download tasks that have been scheduled earlier and provides a filtered view of these tasks. This page displays the summary information about a task. The information includes the template name, last time the task was run, next time the task is scheduled to run, and a link to view the results of previous runs. You can also edit the template, modify the schedule, enable, disable, or delete a scheduled task.
After you create and schedule a configuration template, configuration group, or a software download task, the scheduled task or template is listed in the Scheduled Configuration Tasks page.
You cannot create any new scheduled task or template in this page. You can only edit the scheduled task or template that is already created.
You can modify, enable, disable, or delete the following scheduled configuration tasks:
- AP Template
- Configuration Group
- WLAN Configuration
- Download Software
View Scheduled Configuration Changes - Access Point Radio
The AP Template Tasks page allows you to manage current access point template tasks. Ensure that at least one lightweight access point task exists (see Configure a Lightweight AP Using Template).
Task |
Description |
---|---|
Modify a current access point template task |
|
Enable a current access point template task |
|
View Schedule Configuration Changes - WLANs
To view and manage all scheduled WLAN tasks in Prime Infrastructure:
Procedure
Step 1 |
Choose . |
Step 2 |
From the left sidebar menu, choose WLAN Configuration. |
Step 3 |
Select the Task Name link to open the WLAN Schedule Detail page. In this page, you can modify the date and time of the scheduled task. |
Step 4 |
Select the check box of the scheduled task and use the Select a command drop-down list to enable, disable, or delete selected tasks. |
Download Software to Controllers and APs
Use this feature to manage the software download tasks.
Schedule Software Downloads to Controllers and APs
To add a download software task:
Procedure
Step 1 |
Choose Download Software. , then from the left sidebar menu, choose |
||||
Step 2 |
Choose Add Download Software Task from the Select a command drop-down list, then click Go. |
||||
Step 3 |
Configure the following information:
To see Image Predownload status per AP, enable the task in the , and run an AP Image Predownload report from the Report Launch Pad.
Schedule enough time (at least 30 minutes) between Download and Reboot so that all APs can complete the software pre-download. If any one of the AP is in pre-download progress state at the time of scheduled reboot, the controller does not reboot. In such a case, wait for the pre-download to finish for all of the APs and reboot the controller manually.
To receive email notifications, configure Prime Infrastructure mail server in the page.
Complete these details if you selected the Download software to controller option in Schedule Details area. TFTP—Specify the TFTP Server Information:
If you choose TFTP server, choose Default Server or add a New server from the Server Name drop-down list.
FTP—Specify the FTP Server Information:
|
||||
Step 4 |
Click Save. |
Change Scheduled Software Downloads
Before You Begin
At least one download software task must exist (see Schedule Software Downloads to Controllers and APs).
To modify a download software task:
Procedure
Step 1 |
Choose . |
Step 2 |
From the left sidebar menu, choose Download Software. |
Step 3 |
Click the Task Name link to open the Download Software Task page, make any changes, then click Save. Any changes in Download Type (Download/Pre-download) or Server Type (FTP/TFTP) for the task in Enabled state sets the task to Disabled state, and all existing controllers are disassociated from the task. |
Schedule Controllers for Software Downloads
This page lists all the supported controllers that can be selected for the scheduled image download/pre-download task.
To select a controller for scheduled image download:
Procedure
Step 1 |
Choose . |
||
Step 2 |
From the left sidebar menu, choose Download Software. |
||
Step 3 |
Click the Controller to open the Download Software Task details page, then click Select Controller to view the controller list.
The Select Controllers page can also be accessed by choosing , then clicking the hyperlink in the Select Controller column for any download task that is in the Enabled, Disabled or Expired state.You cannot download software to any controllers with the Reachability Status of Unreachable. |
||
Step 4 |
Make any necessary changes, then click Save. |