Cisco Prime Collaboration Provisioning Install and Upgrade Guide, 12.1
Chapter: Get Started after
Get Started after
Log in to Cisco
Prime Collaboration Provisioning
You can invoke Cisco
Prime Collaboration using the client browser.
||Open a browser
session from your machine. See
System Requirements - Server and Client Machine Requirements
for information about supported browsers.
For a standalone
mode, specify the IP address of the Cisco Prime Collaboration Provisioning
Based on the
browser you are using, you see one of the following:
use either the IP address or the hostname of the Cisco Prime Collaboration
Provisioning server. We recommend that you use the hostname if you have
configured it in DNS.
Troubleshooting Account CLI is supported only through SSH;
Telnet is not supported. The port used for Cisco Prime Collaboration
Provisioning is 22.
These windows appear because Cisco Prime Collaboration uses a
Certificate Error: Navigation Blocked window.
Untrusted Connection window.
Privacy Error: Connection is not private window.
||Remove the SSL
Prime Collaboration login page appears.
Prime Collaboration login page, you must log in for the first time
as a global administrator, using the same credentials that you have specified
during the installation.
The dashboard data
is populated only after you perform tasks listed in the following table.
Get Started with
Cisco Prime Collaboration Provisioning
install Cisco Prime Collaboration Provisioning, perform the tasks listed in the
Navigation in Cisco Prime Collaboration Provisioning Application
or chapter to be referred in the
Cisco Prime Collaboration
Provisioning Guide - Standard and Advanced, 11.x
| Step 1
(Optional if you are evaluating the product) Register a new license file.
recommend that you add a license file through the user interface.
Management. Add License Files.
The system validates the license file and updates the
license. The updated licensing information appears on the
License Status Information
If the license status is not refreshed after a few
minutes, manually refresh the
License Management window to view
the updated license status.
Up the Server
| Step 2
configure, and synchronize call processors and message processors.
| Step 3
|| Set up
- Create domains and assign
call and message processors
- Create service areas
- Configure rules
- Synchronize domain
Domains and Service Areas
Synchronizing Processors, Users, and Domains
| Step 4
and deploy templates to configure Cisco Unified Communication Manager or
User Provisioning, or
Configuring Templates in Provisioning
| Step 5
user roles to a service area.
| Step 6
|| Add a
| Step 7
Provision user services.