Cisco Prime Collaboration Assurance Serviceability, 12.1

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Cisco Prime Collaboration Assurance Serviceability, 12.1

Chapter Title

System Parameters

Results

Updated:
December 20, 2017

Chapter: System Parameters

System Parameters

This chapter provides information on System Parameters Dashboard and the menus involved.

Update System Parameters

System Parameters menu refers to a specific system setting.

Use this menu to update system parameters. It has the provision of entering or changing the IP address, Time Zone, Host Name, DNS Domain, Name Server, and Configure IPv6 Address.

    Step 1   Choose System Parameters > Update System Parameters.
    Step 2   Click Select to update drop-down list. You can select any one of the following system parameters to update:
    Note   

    • An IP Address update requires a system Reboot.

    • A Time Zone update requires a restart of all the processes.

    • An update of other system parameters like Host Name, DNS Domain, Name Server, NTP Server, and Configure IPv6 address do not need a restart of all the processes.

    • IP Address

      You can enter only the New IP Address. The current status is not editable.

    • Time Zone

    • Host Name

    • DNS Domain

    • Name Server

    • NTP Server

    • Configure IPv6 address

    Step 3   Enter the details in the required fields.
    Step 4   Click Update. It updates the entire Cisco Prime Collaboration Assurance server.

    Was this Document Helpful?

    FeedbackFeedback

    Contact Cisco