Cisco Prime Collaboration Assurance Guide - Standard, 11.x
- February 2, 2017
Chapter: Set Log
Cisco Prime Collaboration Assurance
supports the following log levels:
to debug the application.
Information—Indicates the progress of the application.
Error—Indicates that the
application can still continue to run.
error. This level is not listed for all modules.
You cannot disable logging.
However, you can:
The log level settings can be
changed from the
Log Management page ( ). The log files are
also included in the backup file.
You should not change the log
level settings without assistance from the Cisco Technical Assistance Center
© 2017 Cisco and/or its affiliates. All rights reserved.