Cisco Prime Central 2.0 HA Guide
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- March 27, 2018
Chapter: Cisco Prime Central 2.0 HA Installation Guide
Preface
This guide explains how to install Cisco Prime Central and an embedded Oracle database in a local redundancy, high availability (HA) configuration that uses the Red Hat Cluster Suite (RHCS) in both Bare-metal and VMware and KVM environments. Other operational redundancy deployments are not supported. This guide also explains how to implement geographical disaster recovery in your network.
The IP addresses in this guide are shown for illustrative purposes only and are not intended to be actual addresses.
This preface contains the following sections:
Audience
The primary audience for this guide is network operations personnel and system administrators. This guide assumes that you are familiar with the following products and topics:
Related Documentation
See the Cisco Prime Central 2.0 Documentation Overview for a list of Prime Central guides.
Note
We sometimes update the documentation after original publication. Therefore, you should review the documentation on Cisco.com for any updates.
See also the following Red Hat HA and KVM Hypervisor documentation:
- Red Hat Enterprise Linux 5 Cluster Administration: Configuring and Managing a Red Hat Cluster
- Red Hat Enterprise Linux 5 DM Multipath Configuration and Administration
- Red Hat Enterprise Linux 6 Installation Guide
- Red Hat Enterprise Linux 6 High Availability Add-On Overview
- Red Hat Enterprise Linux 6 Cluster Administration: Configuring and Managing the High Availability Add-On
- Red Hat Enterprise Linux 6 Virtualization Administration Guide
- Red Hat Enterprise Linux 6 Virtualization Getting Started Guide
- Red Hat Enterprise Linux 6 Virtualization Host Configuration and Guest Installation Guide
- Red Hat Enterprise Linux 6 Hypervisor Deployment Guide
- Red Hat Enterprise Linux 6 DM Multipath Configuration and Administration
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see What’s New in Cisco Product Documentation at: http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html.
Subscribe to What’s New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation, as an RSS feed and deliver content directly to your desktop using a reader application. The RSS feeds are a free service.
Feedback