The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
enable 1-3
login 1-3
from local host 1-3
from remote host 1-4
enable 1-4
login 1-4
DPE command modes 1-2
from local host 1-3
from remote host 1-4
See SNMP, SNMP agent commands
clearing 7-1
current cache, bundling 7-2
viewing available outgoing 7-2
caution, debugging 4-2, 6-7
login 1-4
from local host 1-3
from remote host 1-4
full help function 2-6
partial help function 2-6
disabling 4-9
enabling 4-8
closing Telnet connection 2-5
login 1-2
prompts 1-2
aaa authentication 2-3
clear bundles 7-1
clear cache 3-3
clear logs 6-2
debug dpe cache 6-3
debug dpe connection 6-4
debug dpe dpe-server 6-4
debug dpe event-manager 6-4
debug dpe exceptions 6-5
debug dpe framework 6-5
debug on 6-7
debug service packetcable netsnmp 4-3
debug service packetcable registration 4-3
debug service packetcable registration-detail 4-4
debug service packetcable snmp 4-4
debug service tftp ipv4 | ipv6 6-7
disable 2-4
dpe docsis shared-secret 3-4
dpe port 3-6
dpe provisioning-group primary 3-7
dpe provisioning-group secondary 3-8
dpe rdu-server port 3-10
dpe rdu-server source ip 3-11
dpe rdu-server source port 3-12
dpe reload 3-12
dpe shared-secret 3-13
dpe start 3-13
dpe start | stop 3-13
dpe stop 3-13
enable 2-5
exit 2-5
help 2-6
interface ip pg-communication 3-14
interface ip provisioning 3-15
interface ip provisioning fqdn 3-17
log level 6-9
no debug all 6-9
no debug dpe cache 6-3
no debug dpe connection 6-4
no debug dpe dpe-server 6-4
no debug dpe event-manager 6-4
no debug dpe exceptions 6-5
no debug dpe framework 6-5
no debug dpe messaging 6-6
no debug service packetcable netsnmp 4-3
no debug service packetcable registration 4-3
no debug service packetcable registration-detail 4-4
no debug service packetcable snmp 4-4
no debug service tftp ipv4 | ipv6 6-8
no dpe docsis shared-secret 3-5
no dpe provisioning-group primary 3-8
no dpe provisioning-group secondary 3-9
no dpe rdu-server source ip 3-11
no interface ip pg-communication 3-15
no interface ip provisioning 3-16
no interface ip provisioning fqdn 3-18
no service packetcable enable 4-5
no service packetcable registration encryption enable 4-6
no service packetcable snmp key-material 4-9
no service tftp ipv4 | ipv6 allow-read-access 3-19
no service tftp ipv4 | ipv6 blocksize 3-20, 3-21
no service tftp ipv4 | ipv6 verify-ip 3-23
no snmp-server community 5-3
no snmp-server contact 5-4
no snmp-server host 5-5
no snmp-server inform 5-6
no snmp-server location 5-7
no snmp-server udp-port 5-9
no tacacs-server host 2-14
password 2-7
service packetcable enable 4-5
service packetcable registration encryption enable 4-6
service packetcable registration kdc-service-key 4-7
service packetcable registration policy-privacy 4-7
service packetcable show snmp log 4-9
service packetcable snmp key-material 4-8
service packetcable snmp timeout 4-9
service tftp ipv4 | ipv6 allow-read-access 3-19
service tftp ipv4 | ipv6 blocksize 3-20, 3-21
service tftp ipv4 | ipv6 enabled 3-22
service tftp ipv4 | ipv6 verify-ip 3-23
service tod ipv4 | ipv6 enabled 3-23
show bundles 7-2
show clock 2-8
show commands 2-9
show device-config 3-24
show disk 2-10
show dpe 3-26
show dpe config 3-26
show hostname 2-10
show ip 2-10
show ip route 2-10
show log 6-10
show memory 2-10
show running-config 2-11
show tftp files 2-12
show version 2-12
snmp-server community 5-2
snmp-server contact 5-3
snmp-server host 5-4
snmp-server inform 5-5
snmp-server location 5-6
snmp-server reload 5-7
snmp-server start | stop 5-8
snmp-server udp-port 5-8
support bundle cache 7-2
tacacs-server host 2-13
tacacs-server retries 2-14
tacacs-server timeout 2-14
uptime 2-17
clearing cache 3-3
clearing source interface for RDU 3-11
configuring port number 3-6
configuring RDU server for DPE 3-10
configuring source interface for RDU 3-11
configuring source port for RDU 3-12
clearing provisioning FQDN 3-18
disabling for Network Registrar 3-15
disabling provisioning 3-16
enabling for Network Registrar extensions 3-14
enabling provisioning 3-15
setting provisioning FQDN 3-17
clearing 3-8
configuring 3-7
clearing 3-9
configuring 3-8
restarting DPE 3-12
configuring 3-13
DOCSIS, clearing 3-5
DOCSIS, configuring 3-4
starting DPE 3-13
stopping DPE 3-13
disabling 3-22
disabling blocksize for transfers 3-20, 3-21
enabling 3-22
enabling blocksize for transfers 3-20, 3-21
IP address request verification, disabling 3-23
IP address request verification, enabling 3-23
local file system read request, disabling 3-19
local file system read request, enabling 3-19
viewing device configuration 3-24
viewing DPE process 3-26
viewing DPE settings 3-26
before debug logging 4-2
caution 6-7
cache debug logging 6-3
connection debug logging 6-4
event manager debug logging 6-4
exception debug logging 6-5
framework debug logging 6-5
message debug logging 6-6
server debug logging 6-4
TFTP transfers debug logging 6-8
cache debug logging 6-3
connection debug logging 6-4
event manager debug logging 6-4
exception debug logging 6-5
framework debug logging 6-5
message debug logging 6-6
TFTP transfers debug logging 6-7
enabling logging 6-7
netSNMP service 4-3
secure registration service 4-3, 4-4
SNMP 4-4
netSNMP service 4-3
registration detail category 4-4
secure registration service 4-3
SNMP 4-4
default DPE password 1-3, 1-4
deleting log files 6-2
DHCP, configuring provisioning group 3-7
clearing 3-5
setting 3-4
See configuration commands
dpe docsis emic shared-secret 3-5
See command modes
DPE port 3-6
unlicensed DPE 2-1
exiting Telnet connection 2-5
See FTP
interface, disabling provisioning 3-18
interface, setting provisioning 3-17
identifying available outgoing bundles 7-2
full CLI help function 2-6
generateSharedSecret.sh tool 4-8
all 2-6
partial 2-6
informs, specifying SNMP notification 5-5, 5-6
PacketCable service 4-2
TFTP service 3-19
ToD service 3-23
disabling for 3-15
enabling for 3-14
disabling 3-16
enabling 3-15
clearing 3-18
setting 3-17
KeyGen tool 4-7
setting 4-7
about 1-1
installing 1-1
obtaining 1-1
unlicensed DPE 1-1
See log system management commands
log level 6-9
log system management commands
deleting logs 6-2
cache 6-3
connection 6-4
event manager 6-4
exception 6-5
framework 6-5
messaging 6-6
server 6-4
TFTP transfers 6-8
enabling debugging 6-7
cache 6-3
connection 6-4
event manager 6-4
exception 6-5
framework 6-5
messaging 6-6
server 6-4
TFTP transfers 6-7
setting log level 6-9
viewing log entries 6-10
managing and monitoring the system
See system commands
PacketCable configuration commands
cloning support 4-8
netSNMP service 4-3
registration detail category 4-4
secure registration service 4-3
SNMP 4-4
netSNMP service 4-3
registration detail category 4-4
secure registration service 4-3
SNMP 4-4
debugging 4-2
disabling 4-5
enabling 4-5
MTA configuration file encryption
disabling 4-6
enabling 4-6
RDU security key 4-9
KDC, setting 4-7
RDU, disabling 4-9
RDU, setting 4-8
setting SNMP privacy policy 4-7
setting SNMP timeout 4-9
viewing SNMP log 4-9
partial CLI help function 2-6
policy privacy 4-7
clearing 3-8
configuring 3-7
clearing 3-9
configuring 3-8
disabling 3-16
enabling 3-15
clearing 3-18
setting 3-17
radius-server host 2-15
RDU security key 4-8
clearing source interface 3-11
clearing source port 3-12
configuring port 3-10
configuring source interface 3-11
configuring source port 3-12
reloading DPE 3-12
restarting DPE 3-12
clearing 4-9
configuring 4-8
KDC 4-7
PacketCable 4-2
TFTP 3-19
ToD 3-23
clearing DOCSIS 3-5
configuring 3-13
setting DOCSIS 3-4
view available outgoing bundles 7-2
viewing available commands 2-9
viewing device configuration cached at DPE 3-24
viewing DPE hostname 2-10
viewing DPE process 3-26
viewing DPE settings 3-26
viewing files in DPE cache 2-12
viewing IP settings 2-10
viewing log entries 6-10
viewing process statistics 3-26
viewing SNMP log 4-9
viewing software version 2-12
agent, starting 5-8
agent, stopping 5-8
agent process, reloading 5-7
removing access 5-3
setting up access 5-2
removing 5-5
specifying 5-4
inform, specifying 5-5
inform, specifying retry 5-5
trap, specifying 5-6
log file, viewing 4-9
setting timeout 4-9
clearing 5-4
specifying 5-3
clearing 5-7
specifying 5-6
UDP port, configuring 5-8
changing listening UDP port 5-9
clearing 5-3
configuring 5-2
configuring listening UDP port 5-8
clearing 5-7
configuring 5-6
removing 5-5
specifying 5-4
inform, specifying 5-5
inform, specifying retry 5-5
trap, specifying 5-6
reloading process 5-7
starting process 5-8
stopping process 5-8
clearing 5-4
configuring 5-3
starting and stopping CLI 1-4
syslog 6-2
local user 2-3
remote TACACS+ user 2-3
changing system password 2-7
disabling DPE 2-4
enabling DPE 2-5
exiting Telnet connection 2-5
configuring 2-13
removing 2-14
setting number of retries 2-14, 2-16
setting timeout 2-14
viewing available commands 2-9
viewing current configuration 2-11
viewing help 2-6
viewing hostname 2-10
viewing IP settings 2-10
viewing software version 2-12
viewing system operating time 2-17
viewing TFTP files in cache 2-12
about 1-6
configuring server 2-13
removing a configured server 2-14
setting number of retries 2-14, 2-16
setting server timeout 2-14
local 2-3
remote TACACS+ 2-3
closing connection 2-5
connecting to server 1-2
disabling 3-20, 3-21
enabling 3-20, 3-21
disabling 3-19
enabling 3-19
disabling 3-23
enabling 3-23
viewing files in cache 2-12
disabling 3-22
enabling 3-22
timeout, setting SNMP service 4-9
disabling 3-23
enabling 3-23
traps, specifying SNMP notifications 5-5, 5-6
cache 7-2
clearing 7-1
viewing outgoing 7-2
UDP port, specifying 5-8
unlicensed DPE 2-1
view current software 2-12
See PacketCable configuration commands
Index
enable 1-3
login 1-3
from local host 1-3
from remote host 1-4
enable 1-4
login 1-4
DPE command modes 1-2
from local host 1-3
from remote host 1-4
See SNMP, SNMP agent commands
clearing 7-1
current cache, bundling 7-2
viewing available outgoing 7-2
caution, debugging 4-2, 6-7
login 1-4
from local host 1-3
from remote host 1-4
full help function 2-6
partial help function 2-6
disabling 4-9
enabling 4-8
closing Telnet connection 2-5
login 1-2
prompts 1-2
aaa authentication 2-3
clear bundles 7-1
clear cache 3-3
clear logs 6-2
debug dpe cache 6-3
debug dpe connection 6-4
debug dpe dpe-server 6-4
debug dpe event-manager 6-4
debug dpe exceptions 6-5
debug dpe framework 6-5
debug on 6-7
debug service packetcable netsnmp 4-3
debug service packetcable registration 4-3
debug service packetcable registration-detail 4-4
debug service packetcable snmp 4-4
debug service tftp ipv4 | ipv6 6-7
disable 2-4
dpe docsis shared-secret 3-4
dpe port 3-6
dpe provisioning-group primary 3-7
dpe provisioning-group secondary 3-8
dpe rdu-server port 3-10
dpe rdu-server source ip 3-11
dpe rdu-server source port 3-12
dpe reload 3-12
dpe shared-secret 3-13
dpe start 3-13
dpe start | stop 3-13
dpe stop 3-13
enable 2-5
exit 2-5
help 2-6
interface ip pg-communication 3-14
interface ip provisioning 3-15
interface ip provisioning fqdn 3-17
log level 6-9
no debug all 6-9
no debug dpe cache 6-3
no debug dpe connection 6-4
no debug dpe dpe-server 6-4
no debug dpe event-manager 6-4
no debug dpe exceptions 6-5
no debug dpe framework 6-5
no debug dpe messaging 6-6
no debug service packetcable netsnmp 4-3
no debug service packetcable registration 4-3
no debug service packetcable registration-detail 4-4
no debug service packetcable snmp 4-4
no debug service tftp ipv4 | ipv6 6-8
no dpe docsis shared-secret 3-5
no dpe provisioning-group primary 3-8
no dpe provisioning-group secondary 3-9
no dpe rdu-server source ip 3-11
no interface ip pg-communication 3-15
no interface ip provisioning 3-16
no interface ip provisioning fqdn 3-18
no service packetcable enable 4-5
no service packetcable registration encryption enable 4-6
no service packetcable snmp key-material 4-9
no service tftp ipv4 | ipv6 allow-read-access 3-19
no service tftp ipv4 | ipv6 blocksize 3-20, 3-21
no service tftp ipv4 | ipv6 verify-ip 3-23
no snmp-server community 5-3
no snmp-server contact 5-4
no snmp-server host 5-5
no snmp-server inform 5-6
no snmp-server location 5-7
no snmp-server udp-port 5-9
no tacacs-server host 2-14
password 2-7
service packetcable enable 4-5
service packetcable registration encryption enable 4-6
service packetcable registration kdc-service-key 4-7
service packetcable registration policy-privacy 4-7
service packetcable show snmp log 4-9
service packetcable snmp key-material 4-8
service packetcable snmp timeout 4-9
service tftp ipv4 | ipv6 allow-read-access 3-19
service tftp ipv4 | ipv6 blocksize 3-20, 3-21
service tftp ipv4 | ipv6 enabled 3-22
service tftp ipv4 | ipv6 verify-ip 3-23
service tod ipv4 | ipv6 enabled 3-23
show bundles 7-2
show clock 2-8
show commands 2-9
show device-config 3-24
show disk 2-10
show dpe 3-26
show dpe config 3-26
show hostname 2-10
show ip 2-10
show ip route 2-10
show log 6-10
show memory 2-10
show running-config 2-11
show tftp files 2-12
show version 2-12
snmp-server community 5-2
snmp-server contact 5-3
snmp-server host 5-4
snmp-server inform 5-5
snmp-server location 5-6
snmp-server reload 5-7
snmp-server start | stop 5-8
snmp-server udp-port 5-8
support bundle cache 7-2
tacacs-server host 2-13
tacacs-server retries 2-14
tacacs-server timeout 2-14
uptime 2-17
clearing cache 3-3
clearing source interface for RDU 3-11
configuring port number 3-6
configuring RDU server for DPE 3-10
configuring source interface for RDU 3-11
configuring source port for RDU 3-12
clearing provisioning FQDN 3-18
disabling for Network Registrar 3-15
disabling provisioning 3-16
enabling for Network Registrar extensions 3-14
enabling provisioning 3-15
setting provisioning FQDN 3-17
clearing 3-8
configuring 3-7
clearing 3-9
configuring 3-8
restarting DPE 3-12
configuring 3-13
DOCSIS, clearing 3-5
DOCSIS, configuring 3-4
starting DPE 3-13
stopping DPE 3-13
disabling 3-22
disabling blocksize for transfers 3-20, 3-21
enabling 3-22
enabling blocksize for transfers 3-20, 3-21
IP address request verification, disabling 3-23
IP address request verification, enabling 3-23
local file system read request, disabling 3-19
local file system read request, enabling 3-19
viewing device configuration 3-24
viewing DPE process 3-26
viewing DPE settings 3-26
before debug logging 4-2
caution 6-7
cache debug logging 6-3
connection debug logging 6-4
event manager debug logging 6-4
exception debug logging 6-5
framework debug logging 6-5
message debug logging 6-6
server debug logging 6-4
TFTP transfers debug logging 6-8
cache debug logging 6-3
connection debug logging 6-4
event manager debug logging 6-4
exception debug logging 6-5
framework debug logging 6-5
message debug logging 6-6
TFTP transfers debug logging 6-7
enabling logging 6-7
netSNMP service 4-3
secure registration service 4-3, 4-4
SNMP 4-4
netSNMP service 4-3
registration detail category 4-4
secure registration service 4-3
SNMP 4-4
default DPE password 1-3, 1-4
deleting log files 6-2
DHCP, configuring provisioning group 3-7
clearing 3-5
setting 3-4
See configuration commands
dpe docsis emic shared-secret 3-5
See command modes
DPE port 3-6
unlicensed DPE 2-1
exiting Telnet connection 2-5
See FTP
interface, disabling provisioning 3-18
interface, setting provisioning 3-17
identifying available outgoing bundles 7-2
full CLI help function 2-6
generateSharedSecret.sh tool 4-8
all 2-6
partial 2-6
informs, specifying SNMP notification 5-5, 5-6
PacketCable service 4-2
TFTP service 3-19
ToD service 3-23
disabling for 3-15
enabling for 3-14
disabling 3-16
enabling 3-15
clearing 3-18
setting 3-17
KeyGen tool 4-7
setting 4-7
about 1-1
installing 1-1
obtaining 1-1
unlicensed DPE 1-1
See log system management commands
log level 6-9
log system management commands
deleting logs 6-2
cache 6-3
connection 6-4
event manager 6-4
exception 6-5
framework 6-5
messaging 6-6
server 6-4
TFTP transfers 6-8
enabling debugging 6-7
cache 6-3
connection 6-4
event manager 6-4
exception 6-5
framework 6-5
messaging 6-6
server 6-4
TFTP transfers 6-7
setting log level 6-9
viewing log entries 6-10
managing and monitoring the system
See system commands
PacketCable configuration commands
cloning support 4-8
netSNMP service 4-3
registration detail category 4-4
secure registration service 4-3
SNMP 4-4
netSNMP service 4-3
registration detail category 4-4
secure registration service 4-3
SNMP 4-4
debugging 4-2
disabling 4-5
enabling 4-5
MTA configuration file encryption
disabling 4-6
enabling 4-6
RDU security key 4-9
KDC, setting 4-7
RDU, disabling 4-9
RDU, setting 4-8
setting SNMP privacy policy 4-7
setting SNMP timeout 4-9
viewing SNMP log 4-9
partial CLI help function 2-6
policy privacy 4-7
clearing 3-8
configuring 3-7
clearing 3-9
configuring 3-8
disabling 3-16
enabling 3-15
clearing 3-18
setting 3-17
radius-server host 2-15
RDU security key 4-8
clearing source interface 3-11
clearing source port 3-12
configuring port 3-10
configuring source interface 3-11
configuring source port 3-12
reloading DPE 3-12
restarting DPE 3-12
clearing 4-9
configuring 4-8
KDC 4-7
PacketCable 4-2
TFTP 3-19
ToD 3-23
clearing DOCSIS 3-5
configuring 3-13
setting DOCSIS 3-4
view available outgoing bundles 7-2
viewing available commands 2-9
viewing device configuration cached at DPE 3-24
viewing DPE hostname 2-10
viewing DPE process 3-26
viewing DPE settings 3-26
viewing files in DPE cache 2-12
viewing IP settings 2-10
viewing log entries 6-10
viewing process statistics 3-26
viewing SNMP log 4-9
viewing software version 2-12
agent, starting 5-8
agent, stopping 5-8
agent process, reloading 5-7
removing access 5-3
setting up access 5-2
removing 5-5
specifying 5-4
inform, specifying 5-5
inform, specifying retry 5-5
trap, specifying 5-6
log file, viewing 4-9
setting timeout 4-9
clearing 5-4
specifying 5-3
clearing 5-7
specifying 5-6
UDP port, configuring 5-8
changing listening UDP port 5-9
clearing 5-3
configuring 5-2
configuring listening UDP port 5-8
clearing 5-7
configuring 5-6
removing 5-5
specifying 5-4
inform, specifying 5-5
inform, specifying retry 5-5
trap, specifying 5-6
reloading process 5-7
starting process 5-8
stopping process 5-8
clearing 5-4
configuring 5-3
starting and stopping CLI 1-4
syslog 6-2
local user 2-3
remote TACACS+ user 2-3
changing system password 2-7
disabling DPE 2-4
enabling DPE 2-5
exiting Telnet connection 2-5
configuring 2-13
removing 2-14
setting number of retries 2-14, 2-16
setting timeout 2-14
viewing available commands 2-9
viewing current configuration 2-11
viewing help 2-6
viewing hostname 2-10
viewing IP settings 2-10
viewing software version 2-12
viewing system operating time 2-17
viewing TFTP files in cache 2-12
about 1-6
configuring server 2-13
removing a configured server 2-14
setting number of retries 2-14, 2-16
setting server timeout 2-14
local 2-3
remote TACACS+ 2-3
closing connection 2-5
connecting to server 1-2
disabling 3-20, 3-21
enabling 3-20, 3-21
disabling 3-19
enabling 3-19
disabling 3-23
enabling 3-23
viewing files in cache 2-12
disabling 3-22
enabling 3-22
timeout, setting SNMP service 4-9
disabling 3-23
enabling 3-23
traps, specifying SNMP notifications 5-5, 5-6
cache 7-2
clearing 7-1
viewing outgoing 7-2
UDP port, specifying 5-8
unlicensed DPE 2-1
view current software 2-12
See PacketCable configuration commands