PDF(125.1 KB) View with Adobe Reader on a variety of devices
Updated:September 28, 2016
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
How to use aregcmd commands and the standalone graphical user interface (GUI) of Prime Access Registrar.
Prime Access Registrar server objects and how to use radclient commands to test Prime Access Registrar.
How to configure local authentication and authorization and helpful examples.
RADIUS accounting and how to configure Prime Access Registrar to perform accounting.
How to use scripting points to customize your RADIUS server.
Diameter support and how to configure Prime Access Registrar to perform diameter authentication and authorization.
Support for Extensible Authentication Protocol (EAP) authentication methods.
Support for various features including microwave access (Wimax), replication, identity caching, on-demand address pools, trusted ID authorization, policy engine, fast rules, prepaid billing, wireless, SIGTRAN-M3UA service, and SNMP MIB and transport.
How to use Lightweight Directory Access Protocol (LDAP) remote server and Open Database Connectivity (ODBC).
Enforcing transactions per second (TPS) licensing.
Using REX accounting script.
Backing up the database and logging syslog messages.
Troubleshooting Prime Access Registrar.
TCL, REX, and Java dictionaries, environment variables, and RADIUS attributes.
Support for REpresentational State Transfer (REST) API in Prime Access Registrar
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.