Control Data Collection Jobs
All data collection tasks (and data purging tasks) are controlled from the Jobs Dashboard. See Manage Jobs Using the Jobs Dashboard. Data collection jobs are listed under System Jobs .
About System Jobs
The following table describes the background data collection jobs Cisco EPN Manager performs.
Task Name |
Default Schedule |
Description |
Editable options |
---|---|---|---|
APIC EM Integration Jobs |
|||
APIC-EM Site Sync |
6 hours |
Schedules synchronization of sites and devices between APIC-EM and Cisco EPN Manager . |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
APIC Server Status Periodic |
5 minutes |
Schedules checks on APIC-EM server reachability. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
PnP Status Polling |
5 minutes |
Tracks the status of the PnP devices created on APIC-EM and adds them to Prime Inventory when successful. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Infrastructure jobs |
|||
Mobility Service Status |
5 minutes |
Schedules mobility services status polling. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Autonomous Client Status |
5 minutes |
Lets you schedule status polling of autonomous AP clients. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Bulk Recompute RF Prediction |
15 days |
Schedules status polling of Bulk Recompute RF Prediction. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Controller Configuration Backup |
1 day |
Displays the controller configuration backup activities. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Data Cleanup |
2 hours |
Schedules daily data file cleanup. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Device Config Backup-External |
15 minutes |
Transfers device configuration periodically to external repository.You can configure or create the repository using CLI commands and the supported repositories are FTP, SSH FTP (SFTP) and Network File System (NFS). |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. Click the edit icon, and check the Export only Latest Configuration check box, to transfer only the latest configuration. You can edit the job properties based on the user permission set in Role Based Access Control (RBAC). |
Guest Accounts Sync |
1 day |
Schedules guest account polling and synchronization. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Index serach Entities |
3 hours |
Schedules the Index Search Entities job. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Mobility Service Backup |
7 days |
Schedules automatic mobility services backups. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Mobility Service Synchronization |
1 hour |
Schedules mobility services synchronization. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
On Demand Reports Cleanup |
6 hours |
Schedules reports cleanup. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Server Backup |
1 day |
Schedules automatic Cisco EPN Manager server backups. The backups created are application backups. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Smart License Compliance Status |
Disabled |
Runs for Smart License for the default schedule. |
Non Editable. |
wIPS Alarm Sync |
2 hours |
Schedules wIPS alarm synchronization. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Inventory and Discovery Jobs |
|||
Autonomous AP Inventory |
1 day |
Collects inventory information for autonomous APs. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Switch Inventory |
1 day |
Collects inventory information for Switches. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Wireless Controller Inventory |
1 day |
Collects inventory information for Wireless Controllers. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Status Jobs |
|||
Appliance Status |
5 minutes |
Schedules appliance polling. This task populates the appliance polling details from the Administration > Appliance > Appliance Status page. It also populates information like the performance and fault checking capabilities of the appliance. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Autonomous AP Operational Status |
5 minutes |
Schedules status polling of autonomous wireless access points. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Controller Operational Status |
5 minutes |
Schedules controller operational status polling. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Device Data Collector |
30 minutes |
Schedules data collection based on specified command-line interface (CLI) commands at a configured time interval. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Identity Services Engine Status |
15 minutes |
Schedules Identity Services Engine polling. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Interferers |
15 minutes |
Schedules interferer information collection. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
License Status |
4 hours |
Schedules the license-status information collection. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Lightweight AP Ethernet Interface Status |
1 minute |
Schedules Lightweight AP Ethernet Interface Status information collection. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Lightweight AP Operational Status |
5 minutes |
Schedules Lightweight AP Operational Status information collection. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Lightweight Client Status |
5 minutes |
Schedules information collection for Lightweight AP Clients from Network. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Mobility Service Performance |
15 minutes |
Schedules status polling of mobility services performance. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Mobility Status Task |
15 minutes |
Schedules status polling of mobility services engines. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
OSS Server Status |
5 minutes |
Schedules status polling of OSS Servers. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Redundancy Status |
1 hour |
Schedules redundancy status polling of primary and secondary controllers. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Switch NMSP and Location Status |
4 hours |
Schedules Switch Network Mobility Services Protocol (NMSP) and Civic Location status polling. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Switch Operational Status |
5 minutes |
Schedules switch operational status polling. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Third Party Access Point Operational Status |
3 hours |
Schedules operational status polling of third party APs. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Third Party Controller Operational Status |
3 hours |
Schedules operational status polling of third party Controllers. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Unmanaged APs |
15 minutes |
Collects poll information for unmanaged access points. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Wired Client Status |
2 hours |
Schedules Wireless Client status polling |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Wireless AP Discovery |
5 minutes |
Schedules Wireless AP discovery. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Wireless Configuration Audit |
1 day |
Schedules Wireless Configuration Agent audit collection. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Utilization Collection Jobs |
|||
UtilizationCollector_15Min |
15 minutes |
Schedules physical interface utilization. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
UtilizationProvider_15Min |
15 minutes |
Schedules physical links utilization. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
UtilizationCollector_1Hour |
1 hour |
Schedules physical interface utilization. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
UtilizationProvider_1h |
1 hour |
Schedules physical links utilization. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
UtilizationCollector_6Hour |
6 hours |
Schedules physical interface utilization. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
UtilizationProvider_6h |
6 hours |
Schedules physical links utilization. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
UtilizationCollector_24Hour |
24 hours |
Schedules physical interface utilization. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
UtilizationProvider_1d |
24 hours |
Schedules physical links utilization. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Wireless Monitoring Jobs |
|||
AP Ethernet Statistics |
15 minutes |
Schedules AP Ethernet statistics collection. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
AP Image Pre-Download Status |
15 minutes |
Allows you to see the Image Predownload status of the associated APs in the controllers. To see the status of the access points, the “Pre-download software to APs” checkbox should be selected while downloading software to the controller. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Autonomous AP CPU and Memory Utilization |
15 minutes |
Schedules collection of information on memory and CPU utilization of Autonomous APs. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Autonomous AP Radio Performance |
15 minutes |
Schedules collection of information about radio performance information as well as radio up or down status for autonomous APs. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Autonomous AP Tx Power and Channel Utilization |
15 minutes |
Schedules collection of information about radio performance of Autonomous APs. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
CCX Client Statistics |
1 hour |
Schedules collection of the Dot11 and security statistics for CCX Version 5 and Version 6 clients. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
CleanAir Air Quality |
15 minutes |
Schedules collection of information about CleanAir air quality. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Client Statistics |
15 minutes |
Schedules retrieval of statistical information for autonomous and lightweight clients. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Map Info Polling Job |
1 minute |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
|
Media Stream Clients |
15 minutes |
Schedules collection of information about media stream clients. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Mesh Link Status |
5 minutes |
Schedules collection of status of mesh links. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Mesh link Performance |
10 minutes |
Schedules collection of information about the performance of mesh links. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Radio Performance |
15 minutes |
Schedules collection of statistics from wireless radios. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Radio Voice Performance |
15 minutes |
Schedules collection of voice statistics from wireless radios. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Rogue AP |
2 hours |
Schedules collection of information about rogue access points. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Switch CPU and Memory Poll |
30 minutes |
Schedules polling of switch CPU and memory information. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Traffic Stream Metrics |
8 minutes |
Retrieves traffic stream metrics for the clients. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Wireless Controller Performance |
30 minutes |
Schedules collection of performance statistics for wireless controllers. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |
Wireless QoS Statistics |
15 minutes |
Schedules collection of information QoS Statistics for Wireless Controllers. |
Select Edit Schedule > Recurrence and select the appropriate settings to schedule the job. |