Cisco Elastic Services Controller Troubleshooting Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Cisco Elastic Services Controller Troubleshooting Guide

Chapter Title

Troubleshooting Cisco Elastic Services Controller Post Install

Results

Updated:
March 7, 2022

Chapter: Troubleshooting Cisco Elastic Services Controller Post Install

Troubleshooting Cisco Elastic Services Controller Post Install

Troubleshooting Cisco Elastic Services Controller Post Install

Following are a few examples of the issues you may face:

Before you begin

Problem:

If there are communication issues between ESC and other components within the management and orchestration stack, there may be several reasons for this.

Procedure

Step 1

Client makes the request, and the request hangs after it makes a call to the server.

Step 2

Notifications are not getting transmitted successfully between the components. Following is an example which shows an extract from the mona.log, where a D-MONA agent is unable to send notifications to the central ESC:
2022-03-01 16:44:31.355 [QuartzScheduler_Worker-2] [ruleName] : rule-VM_ALIVE-1-esc-etsi-sol3-vnf-info-001__319bb3d8-71c4-4957-8fe3-34240296d8e9__0:PostVmEventAction execution, Post to url:https://x.x.x.x:8443/ESCManager/dmona/api/events/notif, payload:rule-VM_ALIVE-1-esc-etsi-sol3-vnf-info-001__319bb3d8-71c4-4957-8fe3-34240296d8e9__0
2022-03-01 16:44:41.488 [QuartzScheduler_Worker-2] Error during esc post execution:I/O error on POST request for "https://x.x.x.x:8443/ESCManager/dmona/api/events/notif": Read timed out; nested exception is java.net.SocketTimeoutException: Read timed out

What to do next

Solution:

Issue a curl command from the client to the server to check routing issues. Send a small or empty payload and ensure that the server receives it. Once you know that there are no issues with the routing, try the actual call that the client is attempting and expect the call to get failed.

When a system tries to transmit data over an interface, the data gets fragmented into packets based on the Maximum Transmission Unit (MTU) size configured on the interface.

For example, D-MONA communicates to the VNF on the orchestration network, but ESC through the management network. If the management network does not receive the notifications successfully, check the MTU size.

Often, a larger MTU fails to work in the event. Hence, there are intermediate systems that transmit the packets towards their destination. The intermediate systems are configured with smaller MTUs (as the packets are transferred through their ingress and egress interfaces).

To check the MTU size on an interface:

$ ifconfig eth0
ether: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 9000
        inet 172.29.0.33  netmask 255.255.240.0  broadcast 172.29.15.255

And to update it to a safe value of 1500:

$ sudo ifconfig eth0 mtu 1500

Now, retry the actual call that the client was failing with and check that it is received successfully by the server.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco