The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
A
accessing the CLI
enable 1-1
login 1-1
from local host 1-1
from remote host 1-1
port number 1-1
C
cipher suites
cryptography algorithms 6-21
supported in BAC 6-22
CLI help 2-4
full help function 2-4
partial help function 2-4
commands
aaa authentication 2-2
clear bundles 10-1
clear cache 3-2
clear logs 8-2
debug dpe cache 8-2
debug dpe connection 8-3
debug dpe dpe-server 8-3
debug dpe event-manager 8-3
debug dpe exceptions 8-4
debug dpe framework 8-4
debug dpe statistics 8-4
debug on 8-5
debug service cwmp client-auth-all 9-3
debug service cwmp connection-request-service 9-3
debug service cwmp cpe-config-sync 9-3, 9-4
debug service cwmp data-sync 9-4
debug service cwmp device-operations 9-4
debug service cwmp device-operations-cache 9-4
debug service cwmp errors 9-5
debug service cwmp extension 9-5
debug service cwmp firmware 9-5
debug service cwmp http-details 9-5
debug service cwmp http-faults 9-5
debug service cwmp http-headers 9-6
debug service cwmp http-requests 9-6
debug service cwmp http-responses 9-6
debug service cwmp instr-gen-requests 9-6
debug service cwmp instruction-details 9-6
debug service cwmp instruction-lookup 9-7
debug service cwmp instruction-rpc 9-7
debug service cwmp instruction-states 9-7
debug service cwmp ipe 9-7
debug service cwmp session 9-7
debug service cwmp session-manager 9-8
debug service cwmp soap-faults 9-8
debug service cwmp soap-informs 9-8
debug service cwmp unknown-devices 9-8
debug service http client-auth-all 9-9
debug service http client-auth-failures 9-10
debug service http details 9-10
debug service http errors 9-10
debug service http faults 9-10
debug service http framework 9-11
debug service http headers 9-10
debug service http request-processing 9-11
debug service ssl 9-11
disable 2-2
dpe port 3-3
dpe provisioning-group primary 3-4
dpe rdu-server host 3-5
dpe rdu-server IP 3-5
dpe reload 3-5
dpe shared-secret 3-6
dpe start 3-6
dpe stop 3-6
enable 2-3
enable password 2-3
exit 2-4
help 2-4
interface ethernet provisioning enabled 3-7
interface ethernet provisioning fqdn 3-7
keystore import-pkcs12 6-13
log level 8-5
no debug 8-5
no debug dpe cache 8-2
no debug dpe connection 8-3
no debug dpe dpe-server 8-3
no debug dpe event-manager 8-3
no debug dpe exceptions 8-4
no debug dpe framework 8-4
no debug dpe messaging 8-4
no debug dpe statistics 8-4
no debug service cwmp client-auth-all 9-3
no debug service cwmp client-auth-failures 9-10
no debug service cwmp connection-request-service 9-3
no debug service cwmp cpe-config-sync 9-3, 9-4
no debug service cwmp data-sync 9-4
no debug service cwmp device-operations 9-4
no debug service cwmp device-operations-cache 9-4
no debug service cwmp errors 9-5, 9-10
no debug service cwmp extension 9-5
no debug service cwmp firmware 9-5
no debug service cwmp http-details 9-5
no debug service cwmp http faults 9-10
no debug service cwmp http-faults 9-5
no debug service cwmp http-headers 9-6
no debug service cwmp http-requests 9-6
no debug service cwmp http-responses 9-6
no debug service cwmp instr-gen-requests 9-6
no debug service cwmp instruction-details 9-6
no debug service cwmp instruction-lookup 9-7
no debug service cwmp instruction-rpc 9-7
no debug service cwmp instruction-states 9-7
no debug service cwmp ipe 9-7
no debug service cwmp session 9-7
no debug service cwmp session-manager 9-8
no debug service cwmp soap-faults 9-8
no debug service cwmp soap-informs 9-8
no debug service cwmp unknown-devices 9-8, 9-9
no debug service http client-auth-all 9-9
no debug service http details 9-10
no debug service http framework 9-11
no debug service http headers 9-10
no debug service http request-processing 9-11
no service cwmp allow-unknown-cpe 6-3
no service cwmp ssl cipher 6-8
no service cwmp ssl cipher all-cipher-suites 6-8
no service http ssl cipher 6-19
no service http ssl cipher all-cipher-suites 6-19
no snmp-server community 7-2
no snmp-server contact 7-3
no snmp-server host 7-4
no snmp-server inform 7-5
no snmp-server location 7-5
no snmp-server udp-port 7-7
no tacacs-server host 2-13
password 2-6
service cwmp allow-unknown-cpe 6-3
service cwmp client-auth mode 6-4
service cwmp enable false 6-4
service cwmp enable true 6-4
service cwmp port 6-4
service cwmp session timeout 6-5
service cwmp ssl cipher 6-8
service cwmp ssl client-auth client-cert-css-ext 6-7
service cwmp ssl client-auth mode 6-6
service cwmp ssl enable false 6-9
service cwmp ssl enable true 6-9
service cwmp ssl keystore 6-10
service http client-auth mode 6-15
service http enable false 6-16
service http enable true 6-16
service http port 6-16
service http ssl cipher 6-19
service http ssl client-auth mode 6-17
service http ssl enable false 6-20
service http ssl enable true 6-20
service http ssl keystore 6-21
show bundles 10-2
show clock 2-7
show commands 2-7
show cpu 2-8
show device-config 3-8
show disk 2-8
show dpe config 3-11
show files 2-9
show hostname 2-9
show ip 2-9
show ip route 2-10
show log 8-6
show memory 2-11
show running config 2-12
show version 2-12
snmp-server community 7-1
snmp-server contact 7-2
snmp-server host 7-3
snmp-server inform 7-4
snmp-server reload 7-6
snmp-server udp-port 7-7
support bundle cache 10-2
support bundle state 10-3
tacacs-server 2-12
tacacs-server retries 2-13
tacacs-server timeout 2-14
uptime 2-14
CWMP technology
about CWMP service 6-1
about HTTP file service 6-1
cipher suites
cryptography algorithms 6-21
disabling, CWMP service 6-8
disabling, HTTP file service 6-19
enabling, CWMP service 6-8
enabling, HTTP file service 6-19
supported in BAC 6-22
client authentication
disabling, CWMP service 6-4
disabling, HTTP file service 6-15
enabling, CWMP service 6-4
enabling, HTTP file service 6-15
client certificate authentication
disabling, CWMP service 6-6
disabling, HTTP file service 6-17
enabling, CWMP service 6-6
enabling, HTTP file service 6-17
client certificate authentication via external CSS server
enabling, CWMP service 6-7
enabling, HTTP file service 6-18
configuring port number
CWMP service 6-4
HTTP file service 6-16
CWMP service
disabling 6-4
enabling 6-4
default settings (table) 6-1
disabling configuration requests for unknown devices 6-3
enabling configuration requests for unknown devices 6-3
HTTP file service
disabling 6-16
enabling 6-16
importing private key and certificates 6-13
setting a keystore file
CWMP service 6-10
HTTP file service 6-21
setting duration for CWMP session timeout 6-5
SSL/TLS protocol
disabling, CWMP service 6-9
disabling, HTTP file service 6-20
enabling, CWMP service 6-9
enabling, HTTP file service 6-20
D
debug commands, CWMP technology
disabling
client authentication debugging, CWMP service 9-3
client authentication debugging, HTTP service 9-9
connection service debugging 9-3
data synchronization debugging 9-4
device configuration synchronization debugging 9-3
device operations debugging 9-4
error responses debugging, CWMP service 9-5
error responses debugging, HTTP service 9-10
failed client authentication debugging, CWMP service 9-3
failed client authentication debugging, HTTP service 9-10
firmware rules debugging 9-5
framework debugging 9-11
immediate-mode device operations cache debugging 9-4
instruction generation requests debugging 9-6
instruction lookup details debugging 9-7
instruction processing debugging 9-6
instruction processing engine debugging 9-7
instruction state transitions debugging 9-7
low-level details debugging, CWMP service 9-5
low-level details debugging, HTTP service 9-10
low-level errors debugging, CWMP service 9-5
low-level errors debugging, HTTP service 9-10
processing of device configurations not stored in DPE debugging 9-8
request and response headers debugging, CWMP service 9-6
request and response headers debugging, HTTP service 9-10
request processing debugging, HTTP service 9-11
requests in payload of a CWMP message debugging 9-6
responses in payload of a CWMP message debugging 9-6
RPC instruction processing debugging 9-7
service extensions debugging 9-5
session lifecycle debugging 9-7
session manager debugging 9-8
SOAP faults debugging 9-8
SOAP Inform messages debugging 9-8
SSL/TLS connection process debugging 9-11
enabling
client authentication debugging, CWMP service 9-3
client authentication debugging, HTTP service 9-9
connection service debugging 9-3
data synchronization debugging 9-4
device configuration synchronization debugging 9-3
device operations debugging 9-4
error responses debugging, CWMP service 9-5
error responses debugging, HTTP service 9-10
failed client authentication debugging, CWMP service 9-3
failed client authentication debugging, HTTP service 9-10
firmware rules debugging 9-5
framework debugging 9-11
immediate-mode device operations cache debugging 9-4
instruction generation requests debugging 9-6
instruction lookup details debugging 9-7
instruction processing debugging 9-6
instruction processing engine debugging 9-7
instruction state transitions debugging 9-7
low-level details debugging, CWMP service 9-5
low-level details debugging, HTTP service 9-10
low-level errors debugging, CWMP service 9-5
low-level errors debugging, HTTP service 9-10
processing of device configurations not stored in DPE debugging 9-8
request and response headers debugging, CWMP service 9-6
request and response headers debugging, HTTP service 9-10
request processing debugging, HTTP service 9-11
requests in payload of a CWMP message debugging 9-6
responses in payload of a CWMP message debugging 9-6
RPC instruction processing debugging 9-7
service extensions debugging 9-5
session lifecycle debugging 9-7
session manager debugging 9-8
SOAP faults debugging 9-8
SOAP Inform messages debugging 9-8
SSL/TLS connection process debugging 9-11
debug dpe chatty-client 8-2
debug dpe dpe-ext 8-3
debug service cwmp num cpe-signed-config-sync 9-4
default DPE password 1-1
default sample keystore 6-10
DPE configuration commands
connecting an RDU to a DPE (FQDN) 3-5
connecting the RDU to a DPE (IP) 3-5
erasing the DPE cache 3-2
identifying the DPE process 3-10
restarting the DPE 3-5
setting DPE port number 3-3
setting the primary provisioning-group 3-4
setting the shared secret 3-6
showing the DPE settings 3-11
starting the DPE 3-6
stopping the DPE 3-6
F
FTP 10-2
bundling the current DPE state 10-2, 10-3
full CLI help function 2-4
L
disabling
cache debugging 8-2
collection of performance statistics debugging 8-4
debugging 8-5
DPE connection debugging 8-3
DPE event manager debugging 8-3
DPE framework debugging 8-4
DPE message debugging 8-4
DPE server debugging 8-3
exception debugging 8-4
enabling
cache debugging 8-2
collection of performance statistics debugging 8-4
debugging 8-5
DPE connection debugging 8-3
DPE event manager debugging 8-3
DPE framework debugging 8-4
DPE message debugging 8-4
DPE server debugging 8-3
exceptions debugging 8-4
removing log files 8-2
setting minimum level of DPE log messages 8-5
showing recent log entries 8-6
M
managing and monitoring the system
See system commands
monitor system commands
showing CPU usage of device 2-8
showing disk use 2-8
showing files in DPE cache 2-9
showing memory use 2-11
N
network and configuration commands
disabling the provisioning interface 3-7
enabling the provisioning interface 3-7
setting FQDN for a provisioning interface 3-7
network and system configuration commands
adding TACACS+ server to TACACS+ client list 2-12
changing the system password 2-6
displaying IP settings 2-9
displaying the hostname 2-9
enabling the password 2-3
removing TACACS+ server 2-13
setting number of TACACS+ exchanges 2-13
setting TACACS+ server response time 2-14
showing current time and date 2-7
showing the IP routing table 2-10
no debug dpe chatty-client 8-2
no debug dpe dpe-ext 8-3
no debug service cwmp num cpe-signed-config-sync 9-4
P
partial CLI help function 2-4
port
accessing the CLI 1-1
S
service cwmp num external-url url 6-5
service http num external-url ur 6-16
show commands
determining available disk space 2-8
determining files in DPE cache 2-9
displaying all available DPE commands 2-7
displaying available memory 2-11
displaying device configuration 3-8
displaying DPE hostname 2-9
displaying IP settings 2-9
displaying the system date and time 2-7
identifying all available outgoing bundles (show bundles command) 10-2
identifying running software on the DPE 2-12
showing CPU use (show cpu command) 2-8
showing the DPE settings 3-11
showing the IP routing table 2-10
SNMP agent commands
changing the SNMP listening UDP port 7-7
identifying a DPE location 7-5
identifying a system contact 7-2
identifying the SNMP listening UDP port 7-7
reloading the SNMP agent process 7-6
removing a DPE location 7-5
removing a host 7-4
removing a system contact 7-3
removing the public community 7-2
setting up a community access string 7-1
specifying a host 7-3
specifying SNMP inform notifications 7-4
specifying SNMP trap notifications 7-5
starting the SNMP agent process (snmp-server start command) 7-6
stopping the SNMP agent process (snmp-server stop command) 7-6
SNMP inform
retries 7-4
starting and stopping the CLI 1-1
support and troubleshooting commands
bundling DPE cache 10-2
bundling the DPE 10-3
clearing archive bundles 10-1
identifying all available outgoing bundles 10-2
local user 2-2
remote TACACS+ user 2-2
disabling 2-2
displaying help 2-4
enabling 2-3
exiting 2-4
showing all available DPE commands 2-7
showing configurations 2-12
showing system operating time 2-14
T
TACACS+
protocol 2-2
Telnet
closing DPE connection 2-4
connecting through port 2323 1-1
connecting to server 1-1
traps
snmp-server inform CLI command 7-4
U
unlicensed DPE 8-2