Management Plane Protection Debug Commands on Cisco IOS XR Software

Table Of Contents

Management Plane Protection Debug Commands on Cisco IOS XR Software

debug management-plane

Management Plane Protection Debug Commands on Cisco IOS XR Software

---

This chapter describes Cisco IOS XR software Management Plane Protection (MPP) debug commands.

For high-level, conceptual information about using debug commands generally, see Using Debug Commands on Cisco IOS XR Software, Release 3.6.0.

debug management-plane

To enable debugging for management-plane events such as configuration changes, protocol inquiries, or ip-address changes, use the debug management-plane command in EXEC mode. To disable debugging output, use the no form of this command.

debug management-plane {detail | errors | events} [job job id]

no debug management-plane {detail | errors | events} [job job id]

Syntax Description

detail	Displays details for all events.
errors	Displays all errors.
events	Displays all events.
job job id	(Optional) Enables debugging for a specified job.

Defaults

No default behavior or values

Command Modes

EXEC

Command History

Release	Modification
Release 3.5.0	This command was introduced on the Cisco CRS-1 and Cisco XR 12000 Series Router.
Release 3.6.0	No modification.
Release 3.7.0	No modification.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

Debugging output is assigned high priority in the CPU process and, therefore, can affect system performance. For more information about the impact on system performance when using debug commands, refer to Using Debug Commands on Cisco IOS XR Software.

Task ID

Task ID	Operations
system	read

Examples

The following example shows the debug management-plane command using the errors keyword:

RP/0/RP0/CPU0:router# debug management-plane errors job 141