NSPW0001I module_id product_name Rel:V version R release M modification
product_code started on date_time Explanation The Cisco Workload Agent for OS/390 startup message with release identification and time stamp. In this message: – module_id is the module ID –product_name is the product name –version is the version number –release is the release number –modification is the modification level –product_code is the product code –date_time is the date/time stamp for when the program started Action None |
NSPW0002I module_id copyright Explanation The Cisco Workload Agent for OS/390 copyright message. In this message: –module_id is the module ID –copyright is the copyright date Action None |
NSPW0003I module_id product_name JobID:jobname ASCB:ascb_addr ASID:asid
ICAG:wla_cvt Explanation This message identifies the Cisco Workload Agent for OS/390 address space control block. In this message: –module_id is the module ID –product_name is the product name (such as nspwpidn) –jobname is the jobname or started task name –ascb_addr is the address of the job's ASCB –ASID is the address space ID –wla_cvt is the Workload Agent Communication Vector Table (CVT) Action None |
NSPW0004I module_id product_name CPU:cpu_id SYSID=sys_id OS/390:release Explanation System CPU identification, system name, and OS/390 release identification. In this message: –module_id is the module ID –product_name is the product name (such as nspwpidn) –cpu_id is the CPU ID –sys_id is the SMF system ID –release is the OS/390 release Action None |
NSPW0020I module_id product_name initialization starting
Explanation The Cisco Workload Agent for OS/390 initialization process starting. Initialization is complete when message NSPW0021I is displayed. In this message: –module_id is the module ID –product_name is the product name (such as nspwpidn) Action None |
NSPW0021I module_id product_name initialization successful
Explanation Specifies that the Cisco Workload Agent for OS/390 has initialized and the Agent is ready to accept a connection with one or more Services Managers. In this message: –module_id is the module ID –product_name is the product name (such as nspwpidn) Action None |
NSPW0022E module_id product_name initialization failed; rc=return_code Explanation The Cisco Workload Agent for OS/390 initialization was not successful. This message follows initialization error messages. In this message: –module_id is the module ID –product_name is the product name (such as nspwpidn) –return_code is the return code for Agent initialization Action Find error messages in the SYSOUT log and correct the errors. Resubmit the job for execution. |
NSPW0023I source_mod Subpool Name:subpool Subpool ID:subpool_id
Initialized
Explanation A storage subpool was successfully initialized. In this message: –source_mod is the source module ID –subpool is the subpool name –subpool_id is the subpool ID Action None |
NSPW0024I source_mod Subpool Name:subpool Subpool ID:subpool_id freed
Explanation A storage subpool was successfully freed when the Cisco Workload Agent for OS/390 stopped. In this message: –source_mod is the source module ID –subpool is the subpool name –subpool_id is the subpool ID Action None |
NSPW0030I module_id Processing of Exec Parms started
Explanation Validation of JCL execution parameters started. In this message: –module_id is the module ID Action None |
NSPW0031I module_id Parm:exec_parms Explanation Display of JCL execution parameters. In this message: –module_id is the module ID –exec_parms are the execution parameters Action None |
NSPW0034E module_id Keyword:keyword Parameter:parameter is duplicate
Explanation The Cisco Workload Agent for OS/390 encountered a duplicate instance of a keyword specification. In this message: –module_id is the module ID –keyword is the keyword in error –parameter is the parameter in error Action Resolve the duplicate keyword specification and resubmit the job. |
NSPW0035E module_id Keyword:keyword Parameter:parameter invalid
Explanation The Cisco Workload Agent for OS/390 encountered an invalid keyword or parameter. In this message: –module_id is the module ID –keyword is the keyword in error –parameter is the parameter in error Action Correct the keyword specification and resubmit the job. |
NSPW0036E module_id Mandatory Keyword:keyword Not specified
Explanation After processing all specified keywords, it was determined that this keyword was not specified. In this message: –module_id is the module ID –keyword is the keyword that was not specified Action Add the keyword specification to the configuration and resubmit the job. |
NSPW0037E module_id Inconsistent keywords encountered keyword1/keyword2 Explanation There is a keyword specification conflict. In this message: –module_id is the module ID –keyword1 is the first inconsistent keyword encountered. –keyword2 is the second inconsistent keyword encountered. Action Remove or change one of the keyword specifications and resubmit the job. |
NSPW0038I module_id Exec Parm Processing Completed Successfully
Explanation All JCL execution parameters were valid and accepted. In this message: –module_id is the module ID Action None |
NSPW0039W module_id Exec Parm Processing Failed with num_error Errors
Explanation JCL execution parameters contained the errors identified in the previous message. Initialization of the Cisco Workload Agent for OS/390 failed. In this message: –module_id is the module ID –num_error is the number of errors identified in the previous message. Action Correct execution parameter errors and resubmit. |
NSPW0040I module_id Processing of Config file:config_file started
Explanation The processing of the main configuration file has started. In this message: –module_id is the module ID –config_file is the member name of the configuration file in SYSPARM DD Action None |
NSPW0041E module_id file_operation error encountered for file:config_file Explanation The Cisco Workload Agent for OS/390 encountered a configuration file error. In this message: –module_id is the module ID –file_operation is the error code –config_file is the member name of the configuration file in SYSPARM DD Action Verify the status of the configuration data set and member. Ensure the data set is valid and resubmit the job. |
NSPW0042I module_id Rec:rec_number config_record Explanation The configuration file record is displayed. In this message: –module_id is the module ID –rec_number is the record number –config_record is the name of the configuration file in SYSPARM DD Action None |
NSPW0043E module_id Duplicate GroupName:dup_groupname
Rec:rec_number1/rec_number2 Explanation The Cisco Workload Agent for OS/390 encountered a duplicate groupname in the services mapping configuration file. In this message: –module_id is the module ID –dup_groupname is the duplicated groupname –rec_number1 is the first record number in conflict –rec_number2 is the second record number in conflict Action Remove or change the duplicate groupname specification. |
NSPW0044E module_id Duplicate Port:dup_port Protocol:protocol
Rec:rec_number1/rec_number2 Explanation The Cisco Workload Agent for OS/390 encountered a duplicate port number for two different groupnames in the services mapping configuration file. In this message: –module_id is the module ID –dup_port is the duplicated port –protocol is the protocol –rec_number1 is the first record number in conflict –rec_number2 is the second record number in conflict Action Remove or change the duplicate port number specification. |
NSPW0045E module_id Rec:rec_number Keyword:keyword Parameter:parameter is
a duplicate
Explanation The Cisco Workload Agent for OS/390 encountered a duplicate specification of a keyword. In this message: –module_id is the module ID –rec_number is the record number –keyword is the keyword in error –parameter is the parameter in error Action Remove duplicate specification and resubmit the job. |
NSPW0046E module_id Rec:rec_number Keyword:keyword Parameter:parameter
invalid
Explanation The user specified a keyword or parameter incorrectly. In this message: –module_id is the module ID –rec_number is the record number –keyword is the keyword in error –parameter is the parameter in error Action Correct keyword specification and resubmit the job. |
NSPW0047E module_id File:config_file Mandatory keyword:keyword missing
Explanation After processing all keywords, it was determined that a keyword specification in the configuration file was missing. In this message: –module_id is the module ID –config_file is the member name of the configuration file in SYSPARM DD –keyword is the missing keyword Action Add the keyword specification and resubmit the job. |
NSPW0048I module_id Processing of Config file:config_file completed
successfully
Explanation The configuration file was validated and accepted. In this message: –module_id is the module ID –config_file is the member name of the configuration file in SYSPARM DD Action None |
NSPW0049E module_id Processing of Config file:config_file Failed;
return_code errors
Explanation The Cisco Workload Agent for OS/390 encountered an I/O error while attempting to process the configuration file. In this message: –module_id is the module ID –config_file is the member name of the configuration file in SYSPARM DD –return_code is the return code for Agent initialization Action Ensure that the data set and member are valid and resubmit the job. |
NSPW0050E module_id Rec:dup_record Duplicate Cluster:dup_clustername Explanation The Cisco Workload Agent for OS/390 encountered a duplicate specification using the same cluster identification. In this message: –module_id is the module ID –dup_record is the duplicated specification –dup_clustername is the duplicated cluster identification Action Remove the duplicate cluster specification and resubmit the job. |
NSPW0051I module_id product_id Termination in progress
Explanation The operator initiated a shutdown of the Cisco Workload Agent for OS/390. In this message: –module_id is the module ID –product_id is the product ID Action None |
NSPW0052I module_id product_id Termination Complete
Explanation The Cisco Workload Agent for OS/390 successfully terminated. In this message: –module_id is the module ID –product_id is the product ID Action None |
NSPW0053I module_id "operator_command" command requested by Operator
Explanation This message echoes the operator_command issued by the operator. In this message: –module_id is the module ID –operator_command is the operator command string Action None |
NSPW0056I module_id Operator CIB; Verb:CIB_verb Command:CIB_data Explanation This message identifies the operator command via the OS/390 operator interface. In this message: –module_id is the module ID –CIB_verb is the CIB verb –CIB_data is the CIB data Action None |
NSPW0067E module_id Invalid Operator Command:operator_command Explanation The command issued by the operator cannot be processed. In this message: –module_id is the module ID –operator_command is the operator command string in error Action Correct the syntax and reissue the operator command. |
NSPW0068I module_id Operator Command:operator_command Completed
Successfully
Explanation The Cisco Workload Agent for OS/390 processed the command successfully. In this message: –module_id is the module ID –operator_command is the operator command string Action None |
NSPW0069E module_id Operator Command:operator_command Failed
Explanation The Cisco Workload Agent for OS/390 could not process the command. This message follows other messages that detail the errors. In this message: –module_id is the module ID –operator_command is the operator command string that failed Action Correct the command and reissue. |
NSPW0090I module_id XDC Debugging requested; waiting for programmer
intervention
Explanation The XDC debugger interface was invoked. The XDC interface is waiting for a terminal connection. In this message: –module_id is the module ID Action Connect to XDC via Cross-Domain Facility (CDF). |
NSPW0110I module_id Initialization for facility Facility Started
Explanation The specified component began initialization. In this message: –module_id is the module ID –facility is the component that is initializing Action None |
NSPW0111I module_id Initialization for facility Facility Completed
successfully
Explanation The specified component completed initialization. In this message: –module_id is the module ID –facility is the component that has initialized Action None |
NSPW0112E module_id Initialization for facility Facility Failed;
rc=return_code Explanation The specified component failed to initialize. This message follows one or more messages detailing the errors. In this message: –module_id is the module ID –facility is the component that failed to initialize –return_code is the return code for facility initialization Action Correct all errors and resubmit the job. |
NSPW0208I module_id Workload Agent Registered; time:date_time Explanation The Cisco Workload Agent for OS/390 registered with the WLM. In this message: –module_id is the module ID –date_time is the date/time stamp Action None |
NSPW0209I module_id Workload Agent Deregistered; time:date_time Explanation The Cisco Workload Agent for OS/390 deregistered with the WLM. In this message: –module_id is the module ID –date_time is the date/time stamp Action None |
NSPW0210I module_id WLM Application Registered; time:date_time Explanation A new service registered with WLM. In this message: –module_id is the module ID –date_time is the date/time stamp Action None |
NSPW0211I module_id WLM Application Deregistered; time:date_time Explanation A service deregistered from the WLM. In this message: –module_id is the module ID –date_time is the date/time stamp Action None |
NSPW0212I module_id WLM TCP/IP Stack Registered; time:date_time Explanation A new TCP/IP stack registered with the WLM and is participating in load balancing. Additional messages follow detailing the registration. In this message: –module_id is the module ID –date_time is the date/time stamp Action None |
NSPW0213I module_id WLM TCP/IP Stack Deregistered; time:date_time Explanation A TCP/IP stack deregistered with the WLM. In this message: –module_id is the module ID –date_time is the date/time stamp Action None |
NSPW0214I module_name GroupName:groupname Instance:instance Netid:netid Explanation This message identifies details of a stack or service application WLM registration. This message is part of a multi-line display. In this message: –module_id is the module ID –groupname is the groupname –instance is the instance name –netid is the network ID Action None |
NSPW0215I module_id Protocol:protocol Port:port Explanation This message identifies details of a stack or service application WLM registration. This message is part of a multi-line display. In this message: –module_id is the module ID –protocol is the protocol that is currently in use –port is the port number that is currently in use Action None |
NSPW0216I module_id Host:host_name Explanation This message identifies details of a stack or service application WLM registration. This message is part of a multi-line display. In this message: –module_id is the module ID –host_name is the hostname of the host where the service is registered Action None |
NSPW0217I module_id Interface(s) interface Explanation This message identifies active interfaces for a stack WLM registration. One to five interfaces are listed. This message is part of a multi-line display. In this message: –module_id is the module ID –interface is the active interface (up to five) for a stack WLM registration Action None |
NSPW0222E module_id Duplicate Stack Registration for the host_name Host;
Registration not used
Explanation A duplicate stack registered with WLM. Two different stacks are attempting to use the same host name. The duplicate registration is ignored. Load balancing may be affected. In this message: –module_id is the module ID –host_name is the hostname of the host where the services are being registered Action Review all IBM and Sterling TCP/IP stack configurations used for stack WLM registration and make any necessary corrections. |
NSPW0310I module_id Display Workload Agent WLM
Explanation This message contains the first line of a multi-line response to the operator WLM command. In this message: –module_id is the module ID Action None |
NSPW0311I module_id Cluster:cluster VIPA:ip_addr Explanation This message identifies the cluster associated with the service instances to be displayed. This message is part of a multi-line display. In this message: –module_id is the module ID –cluster is the cluster name –ip_addr is the IP address in standard dotted notation (such as 13.6.10.10) Action None |
NSPW0312I module_id Group:groupname Port:port Explanation This message identifies a groupname and associated port as defined in the Service Mapping configuration file. This message is part of a multi-line display. In this message: –module_id is the module ID –port is the port number Action None |
NSPW0313I module_id Host:host_name Explanation This message identifies a host_name having a service application WLM registration for the group previously displayed. In this message: –module_id is the module ID –host_name is the hostname of the host where the service application is being registered Action None |
NSPW0314I module_id Protocol:protocol Instance:instance Netid:netid Explanation This message identifies a service application instance WLM registration for a host and groupname previously displayed. In this message: –module_id is the module ID –protocol is the associated protocol (TCP/UDP) –instance is the WLM network ID –netid is the network ID Action None |
NSPW0315I module_id WLM Wt:weight Workload Wt:pref_weight Explanation This message identifies the WLM weight and the preference weight used in calculating the port preference weight sent to the Services Manager. In this message: –module_id is the module ID –weight is the WLM weight –pref_weight is the preference weight Action None |
NSPW0319I module_id End Workload Agent Display
Explanation This message identifies the end of display for an operator display command. In this message: –module_id is the module ID Action None |
NSPW0410I module_id Services Manager Discovered IP:ip_addr Port:port
Cluster:cluster Explanation A new TCP connection was established with a Services Manager. The IP address and port number for the Services Manager are displayed, along with the identification of the cluster managed with this connection. In this message: –module_id is the module ID –ip_addr is the IP address, in standard dotted notation (such as 13.6.10.10), for the Services Manager –port is the port number for the Services Manager –cluster is the name of the cluster managed with this connection Action None |
NSPW0411E module_id TCP connection with manager closing; IP:ip_addr
Port:port Cluster:cluster Explanation The TCP connection with a Services Manager terminated. There is probably a problem at the Services Manager. The IP address of the remote Services Manager, port number on the remote Services Manager, and cluster associated with the Services Manager are displayed to identify the Services Manager associated with the connection. In this message: –module_id is the module ID –ip_addr is the IP address, in standard dotted notation (such as 13.6.10.10), for the remote Services Manager –port is the port number for the Services Manager –cluster is the name of the cluster managed with this connection Action Review the Cisco Workload Agent for OS/390 logs. If other error messages exist, then the problem is either an Agent or TCP/IP stack problem. Otherwise, the termination is due to an event at the Services Manager, or a network problem has occurred. |
NSPW0430I module_id Received Signal Ver:version Type:type Len:length MGR
IP:ip_addr Port:port Explanation The Cisco Workload Agent for OS/390 received a signal from the Services Manager. The signal version, signal type, and signal length are displayed, along with the IP address and port number of the manager originating the message. In this message: –module_id is the module ID –version is the signal version –type is the type of signal:
x'0101'—Preference information
x'0201'—Server state
x'0301'—Parameters –length is the length of signal message –ip_addr is the IP address of the Services Manager –port is the port number of the Services Manager Action None |
NSPW0432I module_id Signal:signal Vector:vector Len:length Explanation A control vector was identified in the signal message. The control vector type and length are displayed. In this message: –module_id is the module ID –signal is the signal value –vector is the control vector type:
x'0001' Security
x'0002' Load vector
x'0003' Keepalive –length is the length of the control vector Action None |
NSPW0433I module_id Vector:vector_type Value vector_parameters Explanation This message displays the vector type and vector parameters. In this message: –module_id is the module ID –vector_type is the type of vector –vector_parameters are the parameters of the vector Action None |
NSPW0434I module_id WLM Poll interval changed to poll seconds
Explanation The Cisco Workload Agent for OS/390 received a parameter signal containing a keepalive control vector from a Services Manager. The Services Manager specified a new TCP connection timeout value. The value poll gives the new WLM poll interval in seconds. The Services Manager terminates the TCP connection if signals have not been received within this interval. In this message: –module_id is the module ID –poll is the new WLM poll interval in seconds Action None |
NSPW0437E module_id Invalid Signal:signal_header MGR IP:ip_addr Port:port Explanation The Cisco Workload Agent for OS/390 received an invalid signal from a Services Manager identified by the IP address and port number. In this message: –module_id is the module ID –signal_header is the invalid signal header display in hexadecimal notation –ip_addr is the IP address of the Services Manager –port is the port number of the Services Manager Action Report the event to the Cisco Technical Assistance Center. |
NSPW0438E module_id Vector:vector ignored/unknown
Explanation A signal from a Services Manager was received containing a control vector that was recognized but ignored, or the control vector was unknown. In this message: –module_id is the module ID –vector is the control vector identifier in hexadecimal notation Action Report the event to the Cisco Technical Assistance Center. |
NSPW0439E module_id Signal:signal invalid
Explanation A signal with an invalid format was received from a Services Manager. In this message: –module_id is the module ID –signal is the signal in error Action Report the event to the Cisco Technical Assistance Center. |
NSPW0440I module_id Services Manager disabling following Server(s)
Explanation A signal was received from a Services Manager identifying services specified by IP address and port number which are removed from load balancing by the Services Manager. The Cisco Workload Agent for OS/390 only displays services. This is the first message of a multi-line display. In this message: –module_id is the module ID Action None |
NSPW0441I module_id Port:port Protocol:protocol Explanation This message identifies the port number and protocol being removed from load balancing by the Services Manager. This message follows message NSPW0440I. In this message: –module_id is the module ID –port is the port number being removed from load balancing –protocol is the protocol being removed from load balancing Action None |
NSPW0442I module_id IP:ip_addr BindID:bind_id Weight:weight Explanation This message identifies the IP address, the bind ID associated with the server, and the weight of the service identified in message NSPW0440I. In this message: –module_id is the module ID –ip_addr is the IP address of the service identified in the previous message –bind_id is the bind ID of the service identified in the previous message –weight is the weight of the service identified in the previous message Action None |
NSPW0490E module_id WLM function error:error wrc:return_code rsn:reason
group:groupname Instance:instance Explanation The Cisco Workload Agent for OS/390 encountered an error interfacing with the OS/390 WLM. In this message: –module_id is the module ID –function is the WLM function (IWMSRDNS, IWMSRSRG, IWMSRSDG, IWMSRSRS) –error is the WLM interface reason code –return_code is the WLM function return code –reason is the WLM function reason code –groupname is the WLM groupname/location –instance is the WLM instance Action Report the event to the Cisco Technical Assistance Center. Include information regarding your current OS/390 release and WLM PTF level. |
NSPW0510E module_id protocol Socket error for function encountered;
fileid=file_id, errno=error errno2=error2 Explanation The Cisco Workload Agent for OS/390 encountered a socket error while attempting to perform the indicated function. There is probably a problem with the TCP/IP stack. In this message: –module_id is the module ID –protocol is the protocol (TCP/UDP) –function is the function name –file_id is the socket file ID –error is the errno value –error2 is the errno2 value. See the OS/390 OpenEdition Programming: Assembler Callable Services Reference Appendix for errno2 values. Action Review the TCP/IP stack logs to determine the error. Correct the problem with the TCP/IP stack. The Cisco Workload Agent for OS/390 recovers automatically. If the problem persists, call the Cisco Technical Assistance Center. |
NSPW0512E module_id Selectex() error encountered; errno=error Explanation The Cisco Workload Agent for OS/390 encountered an error while performing the socket function selectex( ). There is probably a problem with the TCP/IP stack. In this message: –module_id is the module ID –error is the errno value Action Review the TCP/IP stack log and correct the problem. The Cisco Workload Agent for OS/390 recovers automatically. |
NSPW0514E module_id function(function_value) error; errno=error
errno2=error2 Explanation The Cisco Workload Agent for OS/390 encountered an error while performing the identified socket function. The function return value, errno and errno2 are displayed. There is probably an TCP/IP stack problem. In this message: –module_id is the module ID –function is the function name –function_value is the function value –error is the errno value –error2 is the errno2 value. See the OS/390 OpenEdition Programming: Assembler Callable Services Reference Appendix for errno2 values. Action Review the TCP/IP stack log and correct the problem. The Cisco Workload Agent for OS/390 recovers automatically. |
NSPW0530I module_id Socket:file_id IP:ip_addr Port:port Protocol:protocol
function return_value=ret_value errno=error errno2=error2 Explanation This message identifies the completion status of a socket function. In this message: –module_id is the module ID –file_id is the socket file ID –ip_addr is the IP address –port is the port number –protocol is the protocol (TCP/UDP) –function is the socket function –ret_value is the socket function return value –error is the socket function errno value –error2 is the socket function errno2 value Action None |
NSPW0532I module_id
Selectex(sockparm1,sockparm2,sockparm3,sockparm4,sockparm5,sockparmx)
rc=reason_code errno=error errno2=error2 time:time Explanation This message identifies the completion status of a socket selectex function call. The selectex function enters a wait state until the socket event occurs, a timer expires, or an ECB is posted. In this message: –module_id is the module ID –sockparm1-sockparmx are the socket parameters passed with the selectex socket call. –reason_code is the reason code –error is the socket function Errno value –error2 is the socket function Errno2 value –time is the time stamp Action None |
NSPW0610I module_id Timer exit dispatched; Function:function Time:time Explanation A timer has expired and the identified function is invoked. The value time gives the time the exit was dispatched. In this message: –module_id is the module ID –function is the function name –time is the time stamp Action None |
NSPW0940E module_id Subpool Name:subpool Subpool ID:subpool_id failed to
initialize; rc=reason_code Explanation The Cisco Workload Agent for OS/390 failed to initialize a storage subpool. In this message: –module_id is the module ID –subpool is the name of the subpool that failed to initialize –subpool_id is the subpool ID –reason_code is the reason code Action Report the event to the Cisco Technical Assistance Center. |
NSPW0941E module_id Subpool:subpool cell request failed; rc=reason_code
Explanation A request for a subpool element failed with the displayed reason_code. In this message: –module_id is the module ID –subpool is the original source module ID –reason_code is the reason code Action Report the event to the Cisco Technical Assistance Center. |
NSPW0945E module_id Operator Cmd Interface failed, rc=reason_code Explanation The Cisco Workload Agent for OS/390 encountered an error attempting to use the OS/390 operator interface. In this message: –module_id is the module ID –reason_code is the reason code Action Report the event to the Cisco Technical Assistance Center. |
NSPW0946E module_id Operator Cmd Ignored; Verb:return_code Explanation The Cisco Workload Agent for OS/390 did not recognize a command issued by the OS/390 operator. In this message: –module_id is the module ID –return_code is the operator interface return code Action Determine the correct command and syntax and re-issue the operator command. |
NSPW0949E module_id Subpool Name:subpool Subpool ID:subpool_id failed to
free; rc=reason_code Explanation The Cisco Workload Agent for OS/390 encountered an error while attempting to free a storage subpool. In this message: –module_id is the module ID –subpool is the name of the subpool that failed to initialize –subpool_id is the subpool ID –reason_code is the reason code for the encountered error Action Report the event to the Cisco Technical Assistance Center. |
NSPW0950E module_id Insufficient Storage encountered for function request
for storage_type; return value:ret_value errno:error Explanation The Cisco Workload Agent for OS/390 encountered an error while invoking a function to obtain a type of storage. In this message: –module_id is the module ID –function is the name of the function –storage_type is the type of storage –ret_value is the return code value –errno is the errno value Action Report the event to the Cisco Technical Assistance Center. |
NSPW0960E module_id TCP/IP Stack CB:control_block not found
Explanation The Cisco Workload Agent for OS/390 encountered a database integrity error while attempting to access the required control block. In this message: –module_id is the module ID –control_block is the control block to be accessed Action Report the event to the Cisco Technical Assistance Center. |
NSPW0981E module_id Workload Agent FATAL ERORR, signal(abend) encountered
Explanation The Cisco Workload Agent for OS/390 encountered a serious error. In this message: –module_id is the module ID –abend is the signal type encountered Action Report the event to the Cisco Technical Assistance Center. |
NSPW0982E module_id Workload Agent Serious Error encountered;
Re-initialization beginning
Explanation This message follows message NSPW0981E, indicating that the Cisco Workload Agent for OS/390 is attempting a recovery. In this message: –module_id is the module ID Action None |
NSPW0990W module_id Message message_id not defined; src:source Explanation A message definition is missing from the message database. In this message: –module_id is the module ID –message_id is the message ID –source is the message requestor module ID for the missing message Action Report the event to the Cisco Technical Assistance Center. |
NSPW0991W module_id Message message_id format error; Src:source Explanation The Cisco Workload Agent for OS/390 could not format a message correctly. In this message: –module_id is the module ID –message_id is the message ID –source is the message requestor module ID for the message in error Action Report the event to the Cisco Technical Assistance Center. |
NSPW0992E module_id event Event encountered; Aborting
Explanation The Cisco Workload Agent for OS/390 Event Handler encountered a serious error, event. The Agent aborts and attempts another initialization. In this message: –module_id is the module ID –event is the event that was encountered Action Report the event to the Cisco Technical Assistance Center. |
NSPW0993E module_id Timer timer_error error encountered; Aborting
Explanation The Cisco Workload Agent for OS/390 encountered an error while attempting to establish a timer request. The Cisco Workload Agent for OS/390 aborts and attempts another initialization. In this message: –module_id is the module ID –timer_error is the timer error type Action Report the event to the Cisco Technical Assistance Center. |
NSPW0996W module_id Insufficient storage available for message formatting
message: message_id Src:source Explanation The Cisco Workload Agent for OS/390 encountered a storage shortage and could not format the message. In this message: –module_id is the module ID –message_id is the message ID –source is the message requestor module ID for the message Action Report the event to the Cisco Technical Assistance Center. |
NSPW0997W module_id Exceeded Concurrent Multi-Line WTO displays; message:
message Explanation The Cisco Workload Agent for OS/390 failed to complete a multi-line display. In this message: –module_id is the module ID –message is the WTO text for multi-line display Action Report the event the Cisco Technical Assistance Center. |
NSPW0998W module_id WTO failed for message: message Explanation The Cisco Workload Agent for OS/390 failed to write a message to the OS/390 operator. This message and the message in error are both written to the SYSOUT logs. In this message: –module_id is the module ID –message is the message in error Action Report the event to the Cisco Technical Assistance Center. |
Feedback