gNMI is gRPC Network Management Interface developed by Google. gNMI provides the mechanism to install, manipulate, and delete the configuration of network devices, and also to view operational data. The content provided through gNMI can be modeled using YANG.

gRPC is a remote procedure call developed by Google for low-latency, scalable distributions with mobile clients communicating to a cloud server. gRPC carries gNMI, and provides the means to formulate and transmit data and operation requests.

When a gNMI service failure occurs, the gNMI broker (GNMIB) will indicate an operational change of state from up to down, and all RPCs will return a service unavailable message until the database is up and running. Upon recovery, the GNMIB will indicate a change of operation state from down to up, and resume normal handling of RPCs.

RFC 7951 defines JavaScript Object Notation (JSON) encoding for YANG data trees and their subtrees. gNMI uses JSON for encoding data in its content layer.

The JSON type indicates that the value is encoded as a JSON string. JSON_IETF-encoded data must conform to the rules for JSON serialisation described in RFC 7951. Both the client and target must support JSON encoding.

Instances of YANG data nodes (leafs, containers, leaf-lists, lists, anydata nodes, and anyxml nodes) are encoded as members of a JSON object or name/value pairs. Encoding rules are identical for all types of data trees, such as configuration data, state data, parameters of RPC operations, actions, and notifications.

Every data node instance is encoded as a name/value pair where the name is formed from the data node identifier. The value depends on the category of the data node.

leaf foo {
 type uint8;
}

"foo": 123

The gNMI Get RPC specifies how to retrieve one or more of the configuration attributes, state attributes, derived state attributes, or all attributes associated with a supported mode from a date tree. A GetRequest is sent from a client to the target to retrieve values from the data tree. A GetResponse is sent in response to a GetRequest.

The following is a path for the 
openconfig-interfaces model
++++++++ Sending get request: ++++++++
path {
  elem {
    name: "interfaces"
  }
  elem {
    name: "interface"
    key {
      key: "name"
      value: "Loopback111"
    }
  }
}
 

encoding: JSON_IETF
++++++++ Received get response: ++++++++
notification {
  timestamp: 1521699434792345469
  update {
    path {
      elem {
        name: "interfaces"
      }
      elem {
        name: "interface"
        key {
          key: "name"
          value: "\"Loopback111\""
        }
      }
    }


    val {
      json_ietf_val: "{\n\t\"openconfig-interfaces:name\":\t\
      "Loopback111\",\n\t\
       "openconfig-interfaces:config\":\t{\n\t\t\
       "openconfig-interfaces:type\":\t\"ianaift:
        softwareLoopback\",\n\t\t\
       "openconfig-interfaces:name\":\t\"Loopback111\",\n\t\t\
       "openconfig-interfaces:enabled\":\t\"true\"\n\t},\n\t\
       "openconfig-interfaces:state\":\t{\n\t\t\
       "openconfig-interfaces:type\":\t\"ianaift:
        softwareLoopback\",\n\t\t\
       "openconfig-interfaces:name\":\t\"Loopback111\",\n\t\t\
       "openconfig-interfaces:enabled\":\t\"true\",\n\t\t\
       "openconfig-interfaces:ifindex\":\t52,\n\t\t\


       "openconfig-interfaces:admin-status\":\t\"UP\",\n\t\t\
       "openconfig-interfaces:oper-status\":\t\"UP\",\n\t\t\
       "openconfig-interfaces:last-change\":\t2018,\n\t\t\
       "openconfig-interfaces:counters\":\t{\n\t\t\t\
       "openconfig-interfaces:in-octets\":\t0,\n\t\t\t\
       "openconfig-interfaces:in-unicast-pkts\":\t0,\n\t\t\t\
       "openconfig-interfaces:in-broadcast-pkts\":\t0,\n\t\t\t\
       "openconfig-interfaces:in-multicast-pkts\":\t0,\n\t\t\t\
       "openconfig-interfaces:in-discards\":\t0,\n\t\t\t\
       "openconfig-interfaces:in-errors\":\t0,\n\t\t\t\
       "openconfig-interfaces:in-unknown-protos\":\t0,\n\t\t\t\
       "openconfig-interfaces:out-octets\":\t0,\n\t\t\t\
       "openconfig-interfaces:out-unicast-pkts\":\t0,\n\t\t\t\
       "openconfig-interfaces:out-broadcast-pkts\":\t0,\n\t\t\t\
       "openconfig-interfaces:out-multicast-pkts\":\t0,\n\t\t\t\
       "openconfig-interfaces:out-discards\":\t0,\n\t\t\t\
       "openconfig-interfaces:out-errors\":\t0,\n\t\t\t\
       "openconfig-interfaces:last-clear\":\t2018\n\t\t},\n\t\t\

       "openconfig-platform:hardware-port\":\t\
       "Loopback111\"\n\t},\n\t\
       "openconfig-interfaces:subinterfaces\":\t{\n\t\t\
       "openconfig-interfaces:index\":\t0,\n\t\t\
       "openconfig-interfaces:config\":\t{\n\t\t\t\
       "openconfig-interfaces:index\":\t0,\n\t\t\t\
       "openconfig-interfaces:name\":\t\"Loopback111\",\n\t\t\t\
       "openconfig-interfaces:enabled\":\t\"true\"\n\t\t},\n\t\t\
       "openconfig-interfaces:state\":\t{\n\t\t\t\
       "openconfig-interfaces:index\":\t0,\n\t\t\t\
       "openconfig-interfaces:name\":\t\"Loopback111.0\",\n\t\t\t\
       "openconfig-interfaces:enabled\":\t\"true\",\n\t\t\t\
       "openconfig-interfaces:admin-status\":\t\"UP\",\n\t\t\t\
       "openconfig-interfaces:oper-status\":\t\"UP\",\n\t\t\t\
       "openconfig-interfaces:last-change\":\t2018,\n\t\t\t\
       "openconfig-interfaces:counters\":\t{\n\t\t\t\t\
       "openconfig-interfaces:in-octets\":\t0,\n\t\t\t\t\
       "openconfig-interfaces:in-unicast-pkts\":\t0,\n\t\t\t\t\
       "openconfig-interfaces:in-broadcast-pkts\":\t0,\n\t\t\t\t\
       "openconfig-interfaces:in-multicast-pkts\":\t0,\n\t\t\t\t\
       "openconfig-interfaces:in-discards\":\t0,\n\t\t\t\t\
       "openconfig-interfaces:in-errors\":\t0,\n\t\t\t\t\

       "openconfig-interfaces:out-octets\":\t0,\n\t\t\t\t\
       "openconfig-interfaces:out-unicast-pkts\":\t0,\n\t\t\t\t\
       "openconfig-interfaces:out-broadcast-pkts\":\t0,\n\t\t\t\t\
       "openconfig-interfaces:out-multicast-pkts\":\t0,\n\t\t\t\t\
       "openconfig-interfaces:out-discards\":\t0,\n\t\t\t\t\
       "openconfig-interfaces:out-errors\":\t0,\n\t\t\t\t\
       "openconfig-interfaces:last-clear\":\
        t2018\n\t\t\t}\n\t\t},\n\t\t\
       "openconfig-if-ip:ipv6\":\t{\n\t\t\t\
       "openconfig-if-ip:config\":\t\"false\",\n\t\t\t\
       "openconfig-if-ip:state\":\t\"false\"\n\t\t}\n\t}\n}"
    }
  }
}
 
 

++++++++ Sending get request: ++++++++
path {
  elem {
    name: "interfaces"
  }
  elem {
    name: "interface"
    key {
      key: "name"
      value: "Loopback111"
    }
  }
  elem {
    name: "state"
  }
  elem {
    name: "oper-status"
  }
}

encoding: JSON_IETF
++++++++ Received get response: ++++++++
notification {
  timestamp: 1521699326012374332
  update {
    path {
      elem {
        name: "interfaces"
      }
      elem {
        name: "interface"
        key {
          key: "name"
          value: "\"Loopback111\""
        }
      }
      elem {
        name: "state"
      }
      elem {
        name: "oper-status"
      }
    }
    val {
      json_ietf_val: "\"UP\""
    }
  }
}

The Set RPC specifies how to set one or more configurable attributes associated with a supported model. A SetRequest is sent from a client to a target to update the values in the data tree.

SetRequests also support JSON keys must contain a YANG-prefix, in which the namespace of the following element differs from parent.

For example, the routed-vlan element derived from augmentation in openconfig-vlan.yang must be entered as oc-vlan:routed-vlan, because it is different from the namespace of the parent node (The parent node prefix is oc-if.).

The total set of deletes, replace, and updates contained in any one SetRequest is treated as a single transaction. If any subordinate element of the transaction fails; the entire transaction will be disallowed and rolled back. A SetResponse is sent back for a SetRequest.

++++++++ Sending set request: ++++++++
update {
  path {
    elem {
      name: "interfaces"
    }
    elem {
      name: "interface"
      key {
        key: "name"
        value: "Loopback111"
      }
    }
    elem {
      name: "config"
    }
  }
  val {
    json_ietf_val: "{\"openconfig-interfaces:enabled\":\"false\"}"
  }
}

++++++++ Received set response: ++++++++
response {
  path {
    elem {
      name: "interfaces"
    }
    elem {
      name: "interface"
      key {
        key: "name"
        value: "Loopback111"
      }
    }
    elem {
      name: "config"
    }
  }
  op: UPDATE
}
timestamp: 1521699342123890045
 
 
 

++++++++ Sending set request: ++++++++
update {
  path {
    elem {
      name: "interfaces"
    }
    elem {
      name: "interface"
      key {
        key: "name"
        value: "Loopback111"
      }
    }
    elem {
      name: "config"
    }
    elem {
      name: "description"
    }
  }
  val {
    json_ietf_val: "\"UPDATE DESCRIPTION\""
  }
}

++++++++ Received set response: ++++++++
response {
  path {
    elem {
      name: "interfaces"
    }
    elem {
      name: "interface"
      key {
        key: "name"
        value: "Loopback111"
      }
    }
    elem {
      name: "config"
    }
    elem {
      name: "description"
    }
  }
  op: UPDATE
}
timestamp: 1521699342123890045

A namespace specifies the path prefixing to be used in the origin field of a message.

This section describes the namespaces used in Cisco IOS XE Gibraltar 16.10.1 and later releases:

• RFC 7951-specified namespaces: Path prefixes use the YANG module name as defined in RFC 7951.

  The RFC 7951-specified value prefixing uses the YANG module name.

  Value prefixing is not affected by the selected path prefix namespace. The following example shows an RFC 7951-specified value prefix:

  val {
  	  json_ietf_val:"{
  	    "openconfig-interfaces:config": {
  	      “openconfig-interfaces:description":
  	        “DESCRIPTION”
  	    }
  	  }"
  	}
  

  An RFC 7951-specified namespace prefixing also uses the YANG module name. For example, the openconfig path to a loopback interface will be

  /openconfig-interfaces:interfaces/interface[name=Loopback111]/
  
  

  The following example shows a gNMI path with RFC7951 namespacing:

  path {
    origin: “rfc7951"
    elem {
      name: "openconfig-interface:interfaces"
    }
    elem {
      name: "interface"
      key {
        key: "name"
        value: "Loopback111"
      }
    }
  }
  

• Openconfig: No path prefixes are used. These can only be used with a path to an openconfig model.

  The behavior of the Openconfig namespace prefixing is the same when no origin or namespace is provided. For example, the openconfig path to a loopback interface will be

  /interfaces/interface[name=Loopback111]/

  The following example shows a gNMI path with an Openconfig namespacing:

  path {
    origin: “openconfig"
    elem {
      name: "interfaces"
    }
    elem {
      name: "interface"
      key {
        key: "name"
        value: "Loopback111"
      }
    }
  }
  

• Blank: Same as the openconfig prefix. This is the default.

  The following example shows a gNMI path with a blank Openconfig namespacing:

  path {
  elem {
      name: "interfaces"
    }
    elem {
      name: "interface"
      key {
        key: "name"
        value: "Loopback111"
      }
    }
  }
  

This section describes the path prefixing used in releases prior to Cisco IOS XE Gibraltar 16.10.1.

/oc-if:interfaces/interface[name=Loopback111]/

path {
  origin: “legacy"
  elem {
    name: "oc-if:interfaces"
  }
  elem {
    name: "interface"
    key {
      key: "name"
      value: "Loopback111"
    }
  }
}

The gNMI protocol supports wildcards for Get paths. This is the ability to use a wildcards in a path to match multiple elements. These wildcards indicate all elements in a given subtree in the schema.

An elem is an element, and it is a value between / characters in an xpath. An elem is also available in a gNMI path. For example, the position of a wildcard relative to elem names implies that the wildcard stands for an interface, and is interpreted as all interfaces.

There are two types of wildcards; implicit and explicit, and both are supported. Get paths support all types and combinations of path wildcards.

• Implicit wildcards: These expand a list of elements in an element tree. Implicit wildcard occurs when a key value is not provided for elements of a list.

  The following is a sample path implicit wildcard. This wildcard will return the descriptions of all interfaces on a device:

  path {
    elem {
      name: "interfaces"
    }
    elem {
      name: "interface"
    }
    elem {
      name: "config"
    }
    elem {
      name: "description"
    }
  }
  

• Explicit wildcards: Provides the same functionality by

  • Specifying an asterisk (*) for either the path element name or key name.

    The following is example shows a path asterisk wildcard as the key name. This wildcard returns the description for all interfaces on a device.

    path {
      elem {
        name: "interfaces"
      }
      elem {
        name: "interface"
        key {
         key: "name"
          value: "*"
        }
      }
      elem {
        name: “config"
      }
      elem {
        name: "description"
      }
    }
    

    The following example shows a path asterisk wildcard as the path name. This wildcard will return the description for all elements that are available in the Loopback111 interface.

    path {
      elem {
        name: "interfaces"
      }
      elem {
        name: "interface"
        key {
          key: "name"
          value: "Loopback111"
        }
      }
       elem {
        name: "*"
      }
      elem {
        name: "description"
      }
    }
    

  • Specifying an ellipsis (...) or a blank entry as element names. These wildcards can expand to multiple elements in a path.

    The following example shows a path ellipsis wildcard. This wildcard will return all description fields available under /interfaces.

    path {
      elem {
        name: "interfaces"
      }
      elem {
        name: "..."
      }
      elem {
        name: "description"
      }
    }
    

The following is a sample GetRequest with an implicit wildcard. This GetRequest will return the oper-status of all interfaces on a device.

path {
  elem {
    name: "interfaces"
    }
  elem {
    name: "interface"
  }
  elem {
    name: "state"
  }
  elem {
    name: "oper-status"
  }
},
type: 0,
encoding: 4

The following is a sample GetResponse with an implicit wildcard:

notification {
  timestamp: 1520627877608777450
  update {
    path {
      elem {
        name: "interfaces"
      }
      elem {
        name: "interface"
        key {
          key: "name"
          value: "\"FortyGigabitEthernet1/1/1\""
        }
      }
      elem {
        name: "state"
}
      elem {
        name: "oper-status"
      }
    }
    val {
      json_ietf_val: "\"LOWER_LAYER_DOWN\""
    }
  },

<snip>
…
</snip>

update {
    path {
      elem {
        name: "interfaces"
      }
      elem {
        name: "interface"
        key {
          key: "name"
          value: "\"Vlan1\""
        }
      }
      elem {
        name: "state"
      }
      elem {
        name: "oper-status"
      }
    }
    val {
      json_ietf_val: "\"DOWN\""
    }
  }
}

When errors occur, gNMI returns descriptive error messages. The following section displays some gNMI error messages.

The following sample error message is displayed when the path is invalid:

gNMI Error Response:
  <_Rendezvous of RPC that terminated with (StatusCode.TERMINATED, 
   An error occurred while parsing provided xpath: unknown tag: 
   “someinvalidxpath" Additional information: badly formatted or nonexistent path)>

The following sample error message is displayed for an unimplemented error:

gNMI Error Response:
  <_Rendezvous of RPC that terminated with (StatusCode.UNIMPLEMENTED, 
    Requested encoding "ASCII" not supported)>

The following sample error message is displayed when the data element is empty:

gNMI Error Response:
  <_Rendezvous of RPC that terminated with (StatusCode.NOT_FOUND, 
   Empty set returned for path "/oc-if:interfaces/noinfohere")>

Certs and trustpoint are only required for secure gNMI servers.

# Setting up a CA
openssl genrsa -out rootCA.key 2048
openssl req -subj /C=/ST=/L=/O=/CN=rootCA -x509 -new -nodes -key rootCA.key -sha256 -out rootCA.pem
 
# Setting up device cert and key
openssl genrsa -out device.key 2048
openssl req -subj /C=/ST=/L=/O=/CN=<hostnameFQDN> -new -key device.key -out device.csr
openssl x509 -req -in device.csr -CA rootCA.pem -CAkey rootCA.key -CAcreateserial -out device.crt -sha256
# Encrpyt device key - needed for input to IOS
openssl rsa -des3 -in device.key -out device.des3.key -passout pass:<password - remember this for later>
 
# Setting up client cert and key
openssl genrsa -out client.key 2048
openssl req -subj /C=/ST=/L=/O=/CN=gnmi_client -new -key client.key -out client.csr
openssl x509 -req -in client.csr -CA rootCA.pem -CAkey rootCA.key -CAcreateserial -out client.crt -sha256

The following example show how to install certs on a device:

# Send:
Device# configure terminal
Device(config)# crypto pki import trustpoint1 pem terminal password password1 
 
# Receive:
% Enter PEM-formatted CA certificate.
% End with a blank line or "quit" on a line by itself.
 
# Send:
# Contents of rootCA.pem, followed by newline + 'quit' + newline:
-----BEGIN CERTIFICATE-----
<snip>
-----END CERTIFICATE-----
quit
 
# Receive:
% Enter PEM-formatted encrypted private General Purpose key.
% End with "quit" on a line by itself.
 
# Send:
# Contents of device.des3.key, followed by newline + 'quit' + newline:
-----BEGIN RSA PRIVATE KEY-----
Proc-Type: 4,ENCRYPTED
DEK-Info: DES-EDE3-CBC,D954FF9E43F1BA20
<snip>
-----END RSA PRIVATE KEY-----
quit
 
# Receive:
% Enter PEM-formatted General Purpose certificate.
% End with a blank line or "quit" on a line by itself.
 
# Send:
# Contents of device.crt, followed by newline + 'quit' + newline:
-----BEGIN CERTIFICATE-----
<snip>
-----END CERTIFICATE-----
quit
 
# Receive:
% PEM files import succeeded.
Device(config)#
 
# Send:
Device(config)# crypto pki trustpoint trustpoint1
Device(ca-trustpoint)# revocation-check none
Device(ca-trustpoint)# end
Device#

The gNMI client is connected by using the client and root certificates that are previously configured.

# gRPC Must be compiled in local dir under path below:
>>> import sys
>>> sys.path.insert(0, "reference/rpc/gnmi/")
>>> import grpc
>>> import gnmi_pb2
>>> import gnmi_pb2_grpc
>>> gnmi_dir = '/path/to/where/openssl/creds/were/generated/'
 
# Certs must be read in as bytes
>>> with open(gnmi_dir + 'rootCA.pem', 'rb') as f:
>>>     ca_cert = f.read()
>>> with open(gnmi_dir + 'client.crt', 'rb') as f:
>>>     client_cert = f.read()
>>> with open(gnmi_dir + 'client.key', 'rb') as f:
>>>     client_key = f.read()
 
# Create credentials object
>>> credentials = grpc.ssl_channel_credentials(root_certificates=ca_cert, private_key=client_key, certificate_chain=client_cert)
 
# Create a secure channel:
# Default port is 50052, can be changed on ios device with 'gnmi-yang secure-port ####'
>>> port = 50052
>>> host = <HOSTNAME FQDN>
>>> secure_channel = grpc.secure_channel("%s:%d" % (host, port), credentials)
 
# Create secure stub:
>>> secure_stub = gnmi_pb2_grpc.gNMIStub(secure_channel)
 
# Done! Let's test to make sure it works:
>>> secure_stub.Capabilities(gnmi_pb2.CapabilityRequest())
supported_models {
<snip>
}
supported_encodings: <snip>
gNMI_version: "0.4.0"