MPLS Traffic Engineering DiffServ Configuration Guide
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- February 8, 2016
Chapter: Index
Contents
B - C - D - F - I - L - M - P - Q - R - S - T - U - W -Index
B
benefits 1C
configuration examples
pipe mode with an explicit NULL LSP 1
short pipe mode 1
uniform mode 1D
differentiated services code point 1
DiffServ as a standardization of QoS 1F
features 1I
IP precedence field 1L
layer management 1M
MPLS EXP field, setting 1P
packets, forwarding 1
pipe mode with an explicit NULL LSP
configuring 1
operating procedure 1
overview 1
policing 1
prerequisites for MPLS DiffServ tunneling modes 1Q
QoS
providing to an IP packet 1
providing to an MPLS packet 1
services supported 1
transparency 1
using in MPLS tunneling 1R
restrictions for MPLS DiffServ tunneling modes 1S
service level agreements 1
short pipe mode
configuring 1
operating procedure 1
overview 1
signaling
LSPs 1T
TSP tunnel 1
tunneling 1
tunneling modes
benefits 1
brief descriptions 1
configuration examples 1
configuring 1
determining the appropriate mode 1
features 1
operation 1
prerequisites 1U
uniform mode
configuring 1
operating procedure 1
overview 1W
weighted random early detection 1
Feedback