Routed Pseudowire and
VPLS configuration can route Layer 3 traffic as well as Layer 2 frames for
pseudowire connections between provider edge (PE) devices using Virtual Private
LAN Services (VPLS) multipoint PE. The ability to route frames to and from
these interfaces supports termination of pseudowires into the Layer 3 network
(VPN or global) on the same switch, or to the tunnel Layer 3 frames over a
Layer 2 tunnel (VPLS).
To configure routing
support for a pseudowire, configure the IP address and other Layer 3 features
for the Layer 3 domain in interface configuration mode.
BFD over BDI is
supported with routed VPLS configuration.